The flexiVent lung function solution is the gold standard for in-vivo respiratory mechanics measurements. It goes beyond traditional resistance and compliance mechanics of pulmonary ventilation and captures details about the mechanical properties of conducting airways, terminal airways and parenchyma. The flexiVent achieves the highest sensitivity and reproducibility by precisely controlling experimental conditions….
The APT device enables near-atomic level resolution (~0.2 nm depth & ~0.4 nm lateral) and 3D compositional mapping with high chemical sensitivity (<5 appm) by field evaporation and time-of-flight mass spectrometry. ...
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
This is a high-end Cryo electron microscopy with electron direct detector….
XDD beam line and its experimental station are designed for a general purpose of diffractometry, fluorescence detection and absorption spectroscopy, which will serve the research and development with structural determination, characterization and process monitoring in universities, institutes and industry in Singapore and the region….
A cell sorter with the highest level of automation and a custom biosafety cabinet….
The Versa 3D DualBeam FEG FIB-SEM combines a focused Ga ion beam with a high-resolution field-emission electron gun. Owing to a large chamber allowing up to 6″ industry wafers with full rotation, the Versa 3D provides enhanced 2D and 3D materials characterization and analysis for a wide range of material science and industry-related samples….
Our most advanced XPS AXIS Supra+ provides a range of applications for surface science analysis. It comes with a heat and cool accessories that allow samples mounted on the sample holder to be heated up to +800°C or cooled to <100°C within the Flexi-lock and/or Sample Analysis Chamber....
For department/faculty use only.
This device is used for untargeted compound (metabolomics) analysis and compound characterization. …
High-definition positron emission tomography (HD-PET) scanner combined with a 128 slices Computed tomography (CT) scanner for high resolution anatomical co-registration. The 78 cm bore opening allows for the scanning of large subjects with a uniform resolution of the PET images of 2 mm….
This multichamber physical vapour deposition (PVD) sputtering platform is designed to handle silicon wafers and glass panes. The SV-540 is a state-of-the-art machine having dedicated chambers for the sputtering of metallic, dielectric and TCO/TMO layers. The processing chambers are equipped with planar magnetron sources for DC sputtering of metals, oxides and oxynitrides in the reactive mode, and with a cylindrical dual-magnetron source and planar sources for pulsed DC sputtering of dielectrics and TCOs/TMOs, with substrate heating up to 500 degree Celsius….
The Electron Microscopy Unit (EMU) at the Yong Loo Lin School of Medicine, NUS, is a core facility within the Microscopy Cluster that provides advanced transmission and scanning electron microscopy, along with essential sample preparation tools such as ultramicrotomes. …
The Leica EM CPD300 critical point dryer is an important equipment for SEM sample preparation. It dries biological specimens such as pollen, tissue, plants, insects, as well as industrial samples, like Micro Electro Mechanical Systems (MEMS) or Micro fluids and gels in a fully automated and controlled process. It preserves the surface structure of a specimen which could otherwise be damaged due to surface tension when changing from the liquid to gaseous state….
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
The Leica EM ACE200 is a fully automated, high quality desktop coater designed to produce homogenous coatings of conductive metal or carbon required for SEM imaging. It can be used as a sputter coater or carbon thread evaporation coater with interchangeable heads in one instrument. Glow discharge function is also available for the preparation of TEM grids….
The Leica ultramicrotomes produce high-quality ultra- or semi-thin sections for TEM or LM imaging, as well as perfectly smooth surfaces required for LM, TEM, SEM, and AFM examination. They are equipped with a camera system and a monitor for effective training and demo. The touchscreen control unit of the Leica UC7 ultramicrotome has the ability to control all necessary components for sectioning including independently brightness-controlled LED light sources. It is also equipped with the FC7 low-temperature sectioning system….
The JSM-IT710 HR SEM is a high resolution SEM with the simple SEM function and Zeromag mode, that provides the versatility to handle a wide variety of samples and workflow designed for fast results. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. The SEM is also equipped with Oxford AZtecLiveLite EDS software and Xplore 65 detector for elemental analysis. The SEM has capabilities to perform automatic acquisition for volume EM with the Array Tomography software or Serial Block Face software, with the ConnectomX Katana microtome attached. …
A versatile AFM that can capture images of air-sensitive materials that are inherently distortion-free and reproducible. Equipped with easy tip exchange combined with SmartScan software’s one-click imaging and pre-programmed advanced modes. …
Benchtop semi-auto wire bonder …
High throughput quantitative proteomics or transcriptomic by multiplexing…
This photoluminescence imaging tool can perform luminescence study of silicon solar cells and wafers. It gives visual information about the defects on the sample….
LED I-V tester performs I-V measurement to determine the power conversion efficinecy of solar cell. It uses LED light enigne as light source, with illumination area of 16 cm x 16 cm. It is ideal for performing measurement of 5 busbar M2 sized solar cell….
Xenon-lamp based I-V tester performs I-V measurement to determine the power conversion efficiency of solar cell. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
This inline sputtering tool from FHR Anlagenbau, Germany has three planar magnetron sources, whereby two sources are connected to a DC power supply for DC sputtering of metal layers, while the third source is connected to an RF power supply for the deposition of dielectric films….
Used for the automatic soldering of metal ribbons onto solar cells and interconnecting solar cells into strings. SERIS’ customised TT1800 stringer is capable of interconnecting standard silicon solar cells with up to 6 busbars as well as interdigitated-back-contact solar cells. Both full-size cells and half-cut cells can be processed….
Xenon-lamp based flash I-V tester performs I-V measurement to determine the power conversion efficiency of photovoltaic module. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
Custom setup to perform outdoor Potential Induced Degradation stress on PV module. System will apply up to +1500 or -1500 V to the PV modules for a specified duration….
Extra Ultraviolet (EUV) Branch Beamline is a second branch of the main SINS beamline. Its primary purpose is to measure the reflectivity of EUV optical components…
The soft X-ray-ultraviolet (SUV) beamline is a state-of-the-art beamline producing photons with selective polarizations. It covers the photon energy range from soft X-ray to ultraviolet, which can be used for various advanced optical, spectroscopy and scattering measurements. This integrated characterization-and-growth facility aims to study and distinguish the interplay between spin, charge, orbital and lattice degrees of freedom of advanced materials from solid state physics to biological systems, with various forms, e.g. nanoparticle, ultrathin film to bulk….
Research/Study on marine life in a controlled environment aquarium…
Research/Study on marine life in a controlled environment aquarium…
Research/Study on marine life in a controlled environment aquarium…
The seawater flume is a recirculating system that mimics rapids to help achieve a laminar flow of up to 0.5m/s (with honeycomb collimators). The seawater has an option of passing through a water filter to remove different contaminates, depending on its micron rating. The flume is also equipped with a flow meter (MiniWater6) and water height sensors (installation required). The toughened glass side walls allow for visualization and data capture….
The SCT Thermal Evaporator is a lab-scale tool for depositing metal and other functional thin films (Al, Ag, etc) onto various substrates (silicon wafers, glass sheets, etc). The deposition chamber uses a cryogenic pump and can achieve very low pressure (< 10-6 Torr), ensuring high-purity metal films. The evaporator features dual resistively heated sources and a rotating substrate table to ensure uniform depositions across large-area substrates....
General purpose SEM that performs imaging of surface morphology of conductive samples, using electrons as the beam. Useful for studying surfaces with sub-micrometer structures….
ISMI (Infrared Spectro/Microscopy) beamline provides a state-of-the-art Fourier Transform IR spectrometer and microscope to supply diffraction-limited spatial resolution to an ever-widening range of infrared spectroscopy experiments. Synchrotron based source provides a versatile infrared radiation that covers a spectral range from 10000 to 10 cm-1 and has considerable brightness advantages over conventional (thermal) IR sources enabling IR experiments with high resolution and studies of extremely small or diluted samples….
SINS facility uses a bending magnetic beamline to deliver photon with an energy range from 50-1200 eV for end-station to cover the K-edges of light elements (C, N, and O) and L-edges of transition metals, and M-edges of part of rare earth metals, with user selectable linear and circular polarization for soft x-ray photon. There are two measurement chambers (main chamber and XMCD chamber) in the end-station, which are designed for X-ray photoelectron spectroscopy (XPS), angle-resolved photoemission (ARPES), X-ray absorption spectroscopy (XAS), X-ray linear dichroism (XMLD) and X-ray magnetic circular dichroism (XMCD) experiments….
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 4 lasers and 14 fluorescence detectors….
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and 30 fluorescence detectors….
This equipment is used for deep tissue observation, 3D image reconstruction and live cell imaging….
This analyzer measures and reports the oxygen consumption rate (OCR), proton efflux rate (PER) or extracellular acidification rate (ECAR), as well as ATP production rates of live cells in a 96-well format. It features excellent OCR precision at low rates, verified instrument performance, optimized temperature control, and is automation enabled….
The LSM710 is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels). It is optimized for imaging of cells, tissues, and small organisms….
This high end femto laser is used for precision cutting/drilling and ablating of materials by microns….
The 6550 iFunnel Q-TOF LC/MS system offers both high sensitivity and high-resolution mass detection. It is ideally suited for proteomics research and untargeted analyte detection….
The Echo 525 Liquid Handler is a rapid acoustic liquid handler designed specifically for biochemical and genomics reagent transfer….
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 4 lasers and 15 fluorescence detectors….
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and 18 fluorescence detectors….
This flow cytometer cell sorter is used to measure fluorescently tagged individual cells or particles, followed by isolating these cells or particles based on the measurements….
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and spectral fluorescence flow cytometer analyser….
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and 32 fluorescence detectors….
For department/faculty use only.
The hybrid scribing system is used for P1, P2 and P3 pattering and preparing of thin film and tandem mini-modules of sizes up to 30 cm × 30 cm. The machine features both laser and mechanical scribing methods to prepare thin film mini-modules and mimics the scribing processes commonly used in CIGS PV module production….
The ILS LT is an R&D laser processing workstation for high-precision applications in PV. This tool can be used for several process applications for making high-efficiency solar cells, including contact opening, selective mask processing or edge/junction isolation, wafer drilling, wafer cutting, silicon shadow mask fabrication and laser marking for substrate ID tracking purposes….
A chamber to perform UV light soaking as an accelerated degradation test for PV modules….
This advanced tool uses thermally induced mechanical stress to separate brittle semiconductor materials like silicon wafers. As opposed to conventional laser cutting, no bulging and no formation of particles occur, because the substrate is merely heated and not vaporised. The mechanical stability of TLS-processed solar cells is significantly greater than conventionally processed solar cells….
LC-QTOF is a versatile analytical technique that enables the identification and characterization of unknown compounds in complex samples. It is not limited to a specific research area and finds applications in various scientific disciplines….
LC-QQQ is an analytical technique commonly used for targeted quantitative analysis in various fields. It is particularly useful in areas such as environmental monitoring, food safety testing, and clinical research….
The VSM is used for measuring magnetic properties such as DC characterisation….
The FV3000NIR is a high-speed motorised confocal laser scanning microscope with NIR imaging capability. Equipped with both galvanometer and resonant scanners, it is suitable for imaging of live and fixed samples in multiple dimensions (xyzt in multiple channels)…
The SAFe 360 STORM is a highly motorised laser scanning microscope for multiple 3D SMLM modalities: PALM, dSTORM , PAINT, and single particle tracking….
The A1r inverted is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels) of fixed samples….
A slide scanner for automated imaging of large numbers of slides for fluorescence, brightfield and polarization….
The FV3000 is a high-speed motorised confocal laser scanning microscope. Equipped with both galvanometer and resonant scanners, it is suitable for imaging live and fixed samples in multiple dimensions (xyzt in multiple channels)….
A live cell, real-time analysis of cellular energy metabolism platform….
The fully integrated MBE system allows deposition of hetero-structures and semiconductors. IV and II-VI group deposition chambers are integrated with transfer chamber and load lock. The system has 5 ports for each chamber….
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
This equipment uses SQUID-based magnetometry / susceptibility to provide a stable magnetic field for material characterisation….
This equipment is used for visualisation of magnetic domains and magnetization processes as well as for optically recording magnetization curves qualitatively on all kinds of magnetic materials, including bulk specimens like sheets or ribbons, magnetic films and multilayers, patterned films or micro- and nanowires….
A plasma reactor for the dry etching of silicon and silicon oxide using photoresist masks….
The high end plasma etching system SI 500 uses an inductively coupled plasma with low ion energy for low damage etching and nano structuring….
This device is used for laser UV lithography, direct writing for optical mask production and direct wafer patterning….
A mask aligner for UV lithography….
The X1-STORM is a multi-modal system that boasts super-resolution fluorescence microscopy and live-cell spinning-disk confocal microscopy by combining N-STORM capabilities and CSU-X1 hardware on one microscope body, united by MetaMorph software….
The iLAS2 TIRF is a total internal reflection fluorescence microscope for imaging close to the coverslip surface in multiple dimensions (xyt in multiple channels)….
The CMP system is used for metal and dielectric planarization such as Cu Al, SiO2, SiN. It is able to accommodate polishing for coupon size up to 2 cm as well as wafer size up to 8 inches, with a finishing surface roughness of 1 nm….
The FIBSEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
The Raman microscope acquires detailed chemical images and highly specific Raman data from discrete points. It analyses both large volumes and traces of material….
This is a fast, high-resolution, automated wafer and multi-sample exposures electron beam lithography tool….
Furnace system for wet and dry oxidation in the temperature range of 200 to 1000 degree Celsius…
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
The JEM-2800 is an advanced workhorse 200 kV transmission electron microscope with a Schottky-type field emission electron source. This multi-purpose S/TEM employs an user-friendly, high-stability operating system for high-resolution imaging in TEM (including diffraction modes) and STEM (imaging and EDS). Equipped with a TMP vacuum system, the JEM-2800 is particularly suited for fast screening of multiple samples….
The scanning electron microscope utilizes a focused beam of electrons to scan the surface of a sample. As the electron beam interacts with the specimen, it generates signals such as secondary electrons, backscattered electrons, and characteristic X-rays. These signals are detected and processed to create an image, revealing the topography, composition, and other features of the sample at high magnifications….
The 3-chamber-modules advanced dry etching cluster system is used for micro- and nanomachining of various materials, with 8” wafer size, 300 mm diameter alumina discharge chamber, up to 8 mass flow controlled gas lines for each module and a minimum base pressure of 1×10-6 torr….
This system uses close proximity physical vapour deposition with magnetron technology. The target-to-substrate distance is adjustable between 50-100 mm. The system accepts 3” diameter target size, various sample sizes and a maximum of 8” wafer….
The SCIA Coat 200 is designed for homogeneous coating of high precision optics such as X-ray mirrors and optical filters with the technology of Dual Ion Beam Deposition (DIBD). The system is also equipped with a RF350-e ion beam source for etching process….
Heidelberg DWL 66+ laserwriter is a high resolution pattern generator for direct writing and mask making….
This system applies an external magnetic field during the annealing process, which serves as an effective process to enhance the performance of magnetic devices and materials….
The Mask Aligner 8 system is a precision photolithography tool used in the fabrication of microelectronic devices. It aligns a photomask with a substrate, typically a silicon wafer, and then exposes the substrate to ultraviolet (UV) light. This process transfers the mask’s pattern onto a light-sensitive photoresist layer on the substrate….
This system is used for the atomic layer deposition (ALD) of metal nitrides, oxides and sulphides with thermal and plasma processes….
The JEM-ARM200F is a 200 kV cold field-emission, probe-corrected transmission electron microscope with a STEM resolution of 0.078 nm and TEM resolution of 0.1 nm. It also has an energy-dispersive X-ray detector and dual energy loss spectrometers that can form elemental maps at atomic resolution, and a fast CMOS camera. With its probe aberration corrector and ultra-high-resolution pole piece it is particularly suited to STEM imaging and analysis….
The Fischione 1051 TEM Mill allows for the preparation of TEM lamella samples through dual argon ion beams. Equipped with a touchscreen interface and camera, it can be operated through digital inputs as well as remotely….
The Leica EM RES102 has two saddlefield ion sources with variable ion energies, with the capability of mounting a variety of samples for argon ion milling, including SEM and TEM samples….
The Ion Slicer can prepare thin-film specimens without solvents or chemicals and requires no prior treatment of the specimen other than rectangular slicing (no disc grinding or dimple grinding)…
The FEI Helios 450S FIB is a dual beam Ga+ ion & electron microscope with high-resolution topographical imaging and patterning capabilities. The electron beam is primarily used for surface characterization, while the ion beam is used for top-down fabrication tasks such as TEM lamella preparation, cross-section failure analysis, and nanoscale surface modification. The stability of the low voltage ion beam and chamber cleaning attachments reduces contamination and amorphization vital for S/TEM analysis….
The Orion NanoFab Helium Ion Microscope (HIM) operates using ionized Helium or Neon gases rather than electrons for imaging and milling of materials. With the significantly smaller interaction volume, alongside the smaller de Broglie wavelength, the HIM can achieve finer spatial resolution and larger depth-of-field compared to a FE-SEM. Nanomachining fabrication with sub-10 nm feature sizes is achievable through lighter He ions, while faster milling is operated through heavier Ne ions….
This UHV deposition system is capable of producing good quality thin films of metals, alloys and their multilayers Able to handle 8” wafers size. Targets E-beam: Ti, Cr, Al Thermal: Au, Cu…
The Raman microscope offers advanced confocal imaging capabilities in 2D and 3D. The true confocal Raman microscope enables the most detailed images and analyses to be obtained with speed and confidence. With guaranteed high performance and intuitive simplicity, the LabRAM HR Evolution is the ultimate instrument for Raman spectroscopy. They are widely used for standard Raman analysis, PhotoLuminescence (PL), Tip Enhanced Raman Spectroscopy (TERS) and other hybrid methods….
D8 ADVANCE provides a range of hardware and software solutions for X-ray diffraction and scattering applications, including phase identification, quantitative phase analysis, micro-structure and crystal structure analysis….
The DSC instrument allows user to measure the heat flow into (or out of) a sample when it is heated or cooled, and use the data to determine its melting point, Tg, etc….
The TGA instrument allows the user to measure the mass change in a sample when it is heated at a constant rate, at a constant temperature, or both….
The STA instrument combines function of the TGA and the DSC. It allows user to measure at the same time both the heat flow and the mass change of a sample when it is heated….
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum….
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum. The integrating sphere expands its capability allowing measurement of reflectance spectrum (diffuse or specular)….
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
The fluorescence spectrometer allows user to shine light from UV-Vis range at a sample and collect its fluorescence spectrum….
Fully automated 400MHz NMR spectrometer for routine 1H and multi nuclear acquisition…
The JEOL JES-X320 ESR spectrometer in our lab allows measurements of samples using microwave in the X-band region. It is also equipped with a variable temperature controller (sample temperature range from -150°C to 200°C) and an ultraviolet irradiation apparatus (for photoexcitation of sample)….
This equipment is able to investigate the surface chemistry of materials by measuring the elemental composition, chemical state, and electronic state of the elements within the top few nanometers of the surface….
This equipment is able to analyze the surface morphology and composition of a wide range of samples, including metals, biological specimens, and nanomaterials at the micro and nanometer scale….
Imaging of a specimen’s internal structure and composition at the atomic scale, allowing detailed visualization of cellular structures, materials, and nanostructures. can achieve resolution at the sub-nanometer scale, with less than 10 nanometers (nm)….
Bruker D8 Venture is a Single Crystal X-ray Diffractometer equipped with dual source, four-circle kappa goniometer. It is used for single crystal structure analysis….
Bruker D8 Advance is a Powder X-ray Diffractometer equipped with CuKα source, Goebel Mirror, an XYZ Stage with motorized z-adjustable and LYNXEYE XE-T detector for thin film sample measurements at room temperature….
The Park NX10 AFM features a True Non-Contact™ scan Mode that produces high resolution and accurate data by preventing destructive tip-sample interaction during a scan. Its compact and rigid ‘Step-and-Scan’ enables programmable multiple region imaging….
Split tube furnaces can be used for a wide range of applications where precise temperature control and the ability to easily insert and remove samples are important. Compact design for minimum space requirement….
Split tube furnaces can be used for a wide range of applications where precise temperature control and the ability to easily insert and remove samples are important. Compact design for minimum space requirement….
Graphene CVD is a process used to produce high-quality graphene sheets. This technique involves depositing carbon atoms onto a substrate, typically copper, at high temperatures. A carbon-containing gas, such as methane, is introduced into a reaction chamber where it decomposes on the hot substrate, allowing the carbon atoms to arrange themselves into a single layer of graphene. This method is preferred for its ability to produce large-area graphene with excellent electronic properties, making it suitable for applications in electronics, sensors, and other advanced technologies….
Heidelberg laser writer is a high resolution pattern generator for direct writing and mask making….
The Mask Aligner MJB4 system is a precision photolithography tool used in the fabrication of microelectronic devices. It aligns a photomask with a substrate, typically a silicon wafer, and then exposes the substrate to ultraviolet (UV) light. This process transfers the mask’s pattern onto a light-sensitive photoresist layer on the substrate….
Stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
Fully programmable and user-friendly, the Cee® 200X features the accuracy and repeatability needed to eliminate processing variability from photoresist and thin film deposition processes….
An ICP etch system that utilizes plasma generated by inductively coupled sources to precisely etch materials on substrates through ion bombardment, ensuring high precision and control….
This system enables the cleaning of surfaces, such as before bonding, soldering or gluing, as well as the activation of surfaces before printing, varnishing or gluing. Gases available are Ar, O2 and N2….
500MHz NMR spectrometer with iProbe for 1H and multinuclear acquisition…
500MHz NMR spectrometer with inverse probe for 1H and multidimensional experiment…
400MHz solid state NMR spectrometer 4mm CPMAS probe for multi nuclear acquisition…
Simultaneous DSC-TGA – MS provides simultaneous measurement of heat flow (DSC) and weight change (TGA) from ambient to 1500°C along with evolved gas analyses via the bench top Pfieffer MS up to 300 amu….
This device allows acid digestion of samples under high temperature 240°C and pressure up to 199 bar….
This device quantifies the amount of elements present in the samples down to sub ppm levels….
This equipment enables quantitative analyses of anions such as F, Cl, Br, NO3, PO4, SO4 in aqueous samples….
The D8 ADVANCE is an adaptable diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The D8 ENDEAVOR is a fast automated diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The D2 PHASER is a benchtop diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The Zetasizer Nano ZS is a high-performance two-angle particle and zeta potential analyzer for the enhanced detection of aggregates and small particles….
The Renishaw Raman Microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
The Renishaw Raman microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
Dynamic Mechanical Analyzer (DMA) is equipped with interchangeable clamps such as single cantilever, dual cantilever, 3-point bending, dual film tension, shear and compression. Operation temperature range is from -150°C to 400°C….
Gas chromatography–mass spectrometry, GC-MS, is used to identify the molecular weight, elemental constitution, and molecular structure of the compounds present in the sample….
Quadrupole ion trap MS coupled to an Agilent HPLC with infusion pump for Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
A high-vacuum gas sorption analyzer equipped with both physisorption and chemisorption capabilities for characterization of porous materials. Electrospray Ionisation – Mass spectrometry…
Linear quadrupole ion trap MS coupled to a Dionex HPLC with infusion pump for Brunauer–Emmett–Teller (BET), Micropore Analysis, Mesopore Analysis…
Liquid Chromatography Mass Spectrometry (LC-MS). For protein sequencing, protein analysis and polymer analysis….
It can perform high vacuum physisorption analyses of surface area and micropores. For Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
This equipment measures the weight change and the rate of weight changes as a function of temperature, time and atmosphere….
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
This equipment measures fluorescence emission spectra for liquid/solid samples….
The device is a high-performance liquid chromatography (HPLC) systems designed for analytical and preparative chromatography applications….
The device offers flexibility for solvent selection and automation in HPLC method development….
This device is a high-performance detector designed for use in liquid chromatography (LC) applications. It features a wide range of wavelength coverage, high sensitivity, and fast response time, making it ideal for the detection of a wide variety of compounds….
The most sensitive GC/MS on the market, Shimadzu’s GCMS-QP2010 Plus delivers better performance and reliability with unsurpassed hardware capabilities and powerful, flexible software. Utilizing many of the high-end features of the GCMS-QP2010 Plus, the GCMS-QP2010S offers high throughput and excellent productivity, providing users with an excellent performance-to-cost ratio. …
The Agilent 6890N is a state-of-the-art gas chromatograph that provides superior performance for all applications. Key to its performance is the use of advanced electronic pneumatic control (EPC) modules and high performance temperature control. Each EPC unit is optimized for its intended use with a specific inlet and detector option….
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
This system enables chemiluminescent western blot imaging, DNA gel imaging, fluorescent western blot imaging and protein gel imaging….
GloMax® Discover is a microplate reader with luminescence, fluorescence, BRET/FRET and UV-Visible absorbance detection capabilities….
The TripleTOF 5600+ System combines the best-in-class front end of SCIEX Triple Quad technology with the Accelerator TOF Analyzer, to deliver nominal mass and accurate mass benefits in a single platform. This proven workhorse uniquely integrates comprehensive, qualitative exploration, rapid profiling, and high-resolution quantitation workflows, providing high performance and versatility for pharmaceutical development, omics research and any challenging unknown compound analysis….
The TripleTOF 6600+ System offers sensitive and robust quantitation using dedicated low flow source technology. Redesigned TOF entrance optics, along with software improvements within the forthcoming Analyst® TF Software 1.8, deliver optimized ion beam control, detector tuning, and scheduled ionization….
The QTRAP 6500+ system provides exceptional LOQs over a broad scope of chemical compounds in challenging matrices. QTRAP functionality turned on from the get-go. Instantly access qualitative QTRAP scans for identification, characterization and quantification of your samples. Combine sensitive MRM analysis with qualitative insights instantly.…
The Waters Synapt G2-Si ESI MS is a high resolution electrospray mass spectrometer that is also capable of performing LCMS. Using Water’s Stepwave technology to reduce background noise and eliminate neutrals, a higher signal to noise ratio is reached than traditional Q-TOF instruments. The Synapt will also be capable of performing MS/MS experiments in order to elucidate molecular structures of small molecules….
Beckman Coulter ProteomeLab XL-I analytical ultracentrifuge is equipped with absorbance (wavelength range 190 – 800 nm) and interference optics and can be used for both sedimentation velocity and sedimentation equilibrium experiments. Analytical ultracentrifugation is applicable for proteins, nucleic acids, lipids, polysaccharides, viruses and nanoparticles. It has a broad applicability including determination of sample homogeneity, oligomeric state of proteins (or molecular weight, respectively) and can be used to assess aggregation of sample and to study biomolecular interactions of self- and hetero-association systems (determination of stoichiometry and affinity)….
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
The Cytek Northern Lights™ flow cytometer, with its easy-to-use workflow, is a flexible and affordable full spectrum flow cytometry solution for everyday research applications. The Northern Lights instrument incorporates Cytek’s powerful Full Spectrum Profiling™ (FSP™) technology in a one to three laser system, allowing for a wide array of new fluorochrome combinations without reconfiguring your system for each application. Whether you are doing basic assays such as cell proliferation, apoptosis analysis, or other cell health applications, or multicolor immunophenotyping panels, the Northern Lights system meets all of your flow cytometry needs….
Type A2 BSC with NSF49 enhanced and certified annually…
Near-infrared II in vivo imaging…
The nanoScan® SPECT system images radiotracers with absolute quantification, high sensitivity and high spatial resolution down to 0.3 mm in vivo. In addition, a wide range of patented multi-pinhole collimators is available with optimized performance for any applications: from whole-body to focused scanning; imaging of mice, multiple mice, large rats and rabbits; from low energy tracers to theranostic isotopes….
AniView Pro series is an upgrade of the previous generation of AniView products, adopting a new appearance and more professional structural design. At the same time, the application function has also been enhanced to match more filters, and a new spectral separation function has been added to allow the separation of multiple fluorescent probes, so as to reduce the interference of fluorescent background on experimental results, making it an excellent partner for scientific research experiments….
The ZONETEM II utilizes vacuum-controlled UV irradiation to gently eliminate hydrocarbon contamination for electron microscopy imaging….
The Gatan Solarus II is a plasma cleaning system for removing organic surface contaminants through user-defined gas-flow plasma….
This station is used to store TEM holders….
The Olympus DSX1000 is an upright fully digital microscope with automated xyz and focusing functions. The tilting head allows sample imaging from multiple angles and lens can be selected for a variety of field-of-views….
The ECLIPSE Ti2 is an inverted microscope delivering 25 mm field of view with stable, drift-free platform for high-speed imaging applications….
Zeiss EVO 10 is a 3-in-1 tool, featuring EBL, FESEM and EDX functions within the same tool. At challenging imaging conditions, the electron emitter users benefit from up to 10 times more beam brightness, resulting in an enhanced image resolution and contract. The SmartEDX, which is designed to acquire spatially resolved elemental information from the sample surfaces, obtains its highest throughput at 129 keV energy resolution at typical SEM operating conditions….
This is an advanced battery research lab, equipped with 2 dry rooms (Relative Humidities 1% and 20%) designed for fabrication of batteries (electrodes and slurry) and a battery testing room, capable of galvanostatic charge-discharge tests up to 100 mA for coin, pouch and cylindrical cells….
For department/faculty use only.
The BD Fortessa is a cell analyser that combines powerful fluidic systems and novel optic designs, that combine to allow for maximised signal detection and enable minimal cross-overlapping. The 5 laser setup accommodates the detection of up to 18 colours simultaneously , providing the support for researchers for their multi-colour experiments….
For department/faculty use only.
The BD FACSAria II Cell Sorter is a high-speed, high-precision flow cytometer designed for advanced cell sorting applications. It features state-of-the-art optics and fluidics systems, allowing for simultaneous sorting of up to four populations with high purity and yield. Our system offers customizable configurations with five lasers and multiple fluorescence detectors, supporting complex multi-color experiments….
The Leica EM TXP is a target preparation device for milling, sawing, grinding, and polishing samples prior to examination by SEM, TEM, and LM techniques….
The Leica Ultracut UCT ultramicrotome is an instrument commonly used to prepare TEM samples. It uses either a glass or diamond knife to cut ultra thin sections of specimens embedded in epoxy. The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width and can be stained and mounted onto TEM grids for viewing….
The Bruker AFM is able to operate in 2 modes, ICON AFM Scanner and Fast Scan ADM scanner. The fast scan mode provides X-Y tip velocity of >2 mm per sec, hence is able to scan a sample within a short span of 15 mins. There are also various modes to use, such as the nanomechanical mapping, nanomanipulation, surface potential etc….
MJB4 mask aligner is equipped with a reliable, high precision alignment and high resolution printing capability in the submicron range. It offers fast and highly accurate alignment with SUSS singlefield or spitfield microscope….
6 magnetron sputtering sources (3 DC and 3 AC) mainly for deposition of metals and dielectrics. The DC and RF generators support up to 750 W and 300 W respectively with auto-matching unit. Sample holder is able to hold small piece samples, up to full 8 inches in diameter wafer, with rotation and RF/DC biasing capabilities. A heater jacket is provided for chamber bake-out to achieve UHV pressure….
The JEOL JBX-6300FS EBL is a high throughput system, running at 25 keV, 50 keV and 100 keV acceleration voltages. It has mulit cassette loader (up to 10 samples) and is able to process piece part samples and full 4 inches diameter substrates. The minimum linewidth achievable in our cleanroom environment is 12 nm with sticking accuracy of less than +/- 20 nm at 100 keV. It comes with Genisys-Beamer software to assist in high resolution patterning by proximity effects….
The FEI Verios 460 is one of the leading extreme high resolution SEM family. It provides sub-nanometer resolution from 1~30 keV and enhanced contract needed for precise measurements on materials in advanced semiconductor manufacturing and advanced materials science applications. Our system is equipped with various detectors (in-column detector, ICD for high resolution imaging, STEM detector for scanning transmission electron microscopy of thin membrane etc). It also possesses electron back scattered diffraction, EBSD for crystal orientation mapping….
The AJA electron beam evaporator system is equipped with 6x 15cc crucibles for depositing 6 materials within the same load-lock system….
The Alpha 300R offers unique ability to acquire chemical information non-destructively. It allows you to observe and analyse the distribution of different phases within a sample in ambient conditions without the need to specially prepare your samples. In addition to chemical compounds, analysis of physical properties such as crystallinity or materials stress are also possible….
For department/faculty use only.
This manual digestor is ideally suited for determining the nitrogen and protein amount in solid and pasty substances. …
For department/faculty use only.
The manual distillation system of the brand Gerhardt type Vapodest 20 is ideal for nitrogen analysis and protein analysis according to the Kjeldahl method….
For department/faculty use only.
Fully automated system that could extract up to 24 different samples in less than 2 hours…
For department/faculty use only.
The FatExtractor E-500 is designed for quick and compliant fat extraction….
For department/faculty use only.
Acid hydrolysis system for treatment of samples before fat extraction…
For department/faculty use only.
This device is equipped with 1260 Infinity II PRIME LC system with column heater, autosampler, multicolumn thermostat, 1260 Infinity II Refractive index detector and 1260 Infinity ELSD…
For department/faculty use only.
HPLC system with UV and fluorescence detector…
For department/faculty use only.
The Waters HPLC System integrates solvent and sample management with consistent system-to-system performance and high reproducibility. The Waters chromatography system ensures the reliability of results through high injection precision for precise quantification and exceptional retention time repeatability for accurate peak identification. The Waters 2996 Photodiode Array (PDA) Detector operates in any standard laboratory environment. The detector requires electrical power, sample and waste fluidic lines. Optional connections on the detector rear panel allow communication with chart recorders and data integrators.
…
The Protochips Atmosphere allows the in-Operando study of materials under realistic environmental conditions. Based on a TEM holder closed-cell design, Atmosphere is a fully automated system that includes a computer controlled gas manifold and a feature-rich software interface….
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
For department/faculty use only.
Capable to determine the unknown compounds based on their molecular mass…
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
For department/faculty use only.
Fully automated digestor. It can be used on food, feed, wastewater and a wide range of industrial compund….
For department/faculty use only.
Fully automated distillation, colorimetric titration and calculation….
The device has excellent versatility and high performance for measurements of parts and electrical components, with sub-micron precision….
The Lightning in-situ TEM biasing & heating holder provides real-time information under a controllable electrical and thermal environment in the microscope….
The Elsa cryo-transfer holder is a single-tilt liquid nitrogen holder designed for the frost-free transfer of a sample at liquid nitrogen temperature….
The Mel Build Defend Atmos Defend holder incorporates a specially designed vacuum transfer system and a mechanical drift cancellation controller. The holder can be tilted along two axes and cooled down to -160°C….
For department/faculty use only.
This device helps to identify the potential molecular weight of big molecules….
For department/faculty use only.
This device is suitable for natural product isolation and purification with large injection volumes and big-size columns….
For department/faculty use only.
This device is used for targeted compound analysis, characterization and quantification (if standards are provided)…
For department/faculty use only.
For the freeze drying of non-food grade samples…
For department/faculty use only.
For ashing of most type of organic and inorganic samples…
For department/faculty use only.
A rheometer is a precision instrument that contains the material of interest in a geometric configuration, controls the environment around it, and applies and measures wide ranges of stress, strain, and strain rate….
The system uses Dynamic Light Scattering (DLS) for particle sizing and distribution. For zeta potential two modes, Doppler velocimetry (electrophoretic light scattering or ELS) and Phase Analysis Light Scattering (PALS) are available. Suitable for measuring colloids, nanoparticles, proteins and peptides….
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
For department/faculty use only.
Capable of determining the molecular mass of unknown and quantifying the amount of hydrocarbons present in the sample. Able to determine by liquid, SPME, Arrow and headspace injection…
For department/faculty use only.
This device is able to concentrate samples for small-volume samples, and is suitable for temperature-sensitive samples (< 10°C)....
For department/faculty use only.
A bench-top measurement instrument designed to evaluate the color and appearance of opaque, transparent, and translucent samples….
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
For department/faculty use only.
Monochromator spectrophotometer for reading of absorbance…
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings offers modes for absorbance, kinetic analysis, and fluorescence, as well as microscopy options for high-contrast brightfield, brightfield, phase contrast, and widefield fluorescence….
For department/faculty use only.
Easy to use, powerful, compact and robust – Spectrum Two™ is the Fourier Transform Infrared (FTIR) spectrometer of choice for everyone, everywhere. With fully integrated, robust universal sampling for trouble-free measurements and portability options, Spectrum Two is ideal for use in both laboratory and remote testing environments….
For department/faculty use only.
For the freeze drying of food grade samples only…
For department/faculty use only.
GC-Flame ionisation detector for analysis of volatile compounds….
For department/faculty use only.
Three-Stage Programmable Furnaces feature PID control with ten programs (programs 1 to 9 are general three-stage programs; program 0 is a continuous hold at a set temperature). Program link feature lets you run two three-stage programs sequentially. Use the seven-day delay to program the completion date and time. Ramp rate is adjustable.
…
For department/faculty use only.
The SCIEX Triple Quad™ 3500 LCMS/MS system combines modern hardware, powerful software, and robust engineering to enable lower levels of detection and quantitation than conventional GC and LC workflows, and across a wider range of analytes….
For department/faculty use only.
This is a Triple Quad LCMS system that delivers reliable quantitative and qualitative results for all but the most demanding analyses. …
For department/faculty use only.
This is a Single Quad GC-MS equipped with an Agilent 7890A gas chromatograph and an Agilent 5975C mass spectrometer. …
For department/faculty use only.
The Shimadzu Prominence High-Performance Liquid Chromatograph offers exceptional reliability and great expandability to support diverse applications from UPLC to preparative LC, gel permeation chromatography (GPC), ion chromatography (IC), and LC/MS….
For department/faculty use only.
The Zetasizer Ultra is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. …
For department/faculty use only.
The CytoFLEX Flow Cytometer provides the performance of an easy-to-use system, allowing you to focus on the science, not the instrumentation. Its superior sensitivity and resolution throughout all configurations give it the edge over other cytometry systems four times its size….
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
For department/faculty use only.
ICPE-9820 is suitable for the detection and quantification of multiple elements and metal simultaneously down to ppm or ppb levels in a broad range of sample fields, such as environmental testing, pharmaceuticals, foods, chemicals, and metals….
For department/faculty use only.
The VSA measure gravimetrical change of sample subjected to varying conditions of humidity and temperature. The VSA generates both Dynamic Dew Point Isotherm (DDI) and Dynamic Vapor Sorption (DVS) characteristic curves….
For department/faculty use only.
Mobile Minor can spray dry food grade solutions, suspensions or emulsions into powder samples. …
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
For department/faculty use only.
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time. DSC can be used to study material’s melting, glass transition melting, crystallization, chemical reactions, polymorphic transitions, vaporization and many other processes. Specific heat capacities and changes in heat capacity, can also be determined from the difference in heat flow….
For department/faculty use only.
Brabender TwinLab with 20 mm screws together with cooling die and gravimatric feeder, is suitable for high moisture extrusion. The system also provides comprehensive diagrams with recorded measurement parameters, i.e temperature, pressure, weight for easy monitoring and design of process parameters….
For department/faculty use only.
The Acquity UPLC H-class UPLC system combines the speed and performance of UPLC with the ability to run HPLC separations. The system is configured with a PDA detector. …
For department/faculty use only.
Mixing, emulsifying, homogenizing, disintegrating and dissolving liquid samples…
For department/faculty use only.
The APV systems APV-2000 homogenizer was designed for R&D laboratories within the food, dairy, chemical, cosmetic, biotech, and pharmaceutical industries. Its compact design is suitable for benchtop location and provides both quiet and smooth operation. …
For department/faculty use only.
Mixing, emulsifying, homogenizing, disintegrating and dissolving liquid samples…
For department/faculty use only.
Measure particle size based on Mie Scattering and Fraunhofer diffraction; for both liquid and solid samples
…
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
For department/faculty use only.
Circular Dichroism (CD) is an absorption spectroscopy method based on the differential absorption of left and right circularly polarized light…
For department/faculty use only.
The Agilent 6130 Single Quadrupole LCMS System is a high-performance liquid chromatography-mass spectrometry instrument that combines the separation capabilities of liquid chromatography with the detection capabilities of mass spectrometry. It uses a single quadrupole mass filter to perform accurate and sensitive mass analysis, making it ideal for a wide range of applications including protein and peptide analysis, metabolomics, and small molecule analysis….
For department/faculty use only.
The Xevo® G2-XS QTof is a high-resolution LCMS that combines StepWaveTM ion optics with the XS Collision Cell, providing a significant increase in sensitivity with no reduction in selectivity. During long analyses, critical hardware components stay clean for longer, so results are more reproducible and the laboratory stays productive….
For department/faculty use only.
Shimadzu’s GCMS-QP2020 is a high-end single quadrupole gas chromatograph mass spectrometer that offers excellent performance and smart operability, and the instrument satisfies a wide range of needs for single quadrupole GCMS systems. …
For department/faculty use only.
High shear fluid processor, high efficiency cell rupturing and high performance micro-mixing of emulsions and dispersions…
For department/faculty use only.
Studying adhesion, absorption, wetting behavior, bonding quality, surface treatments and coatings…
For department/faculty use only.
A Raman Microscope with 3 integrated lasers for chemical imaging purposes. …
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system equipped with a DAD detector for chromatographic analysis. …
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system with UHPLC compatibility. The system is equipped with a DAD detector for chromatographic analysis….
For department/faculty use only.
Prep LC with DAD…
For department/faculty use only.
An HPLC system equipped with DAD, FLD and fraction collector…
For department/faculty use only.
An HPLC system equipped with a UV detector…
For department/faculty use only.
The LCMS-8040 is a triple quad LCMS system that offers ultra-high sensitivity, speed, and reliability with improved ion optics, fast MRM transitions, and automated optimization….
For department/faculty use only.
With its array of ultrafast capabilities, the single quadrupole LCMS-2020 mass spectrometer provides the ultimate in high-speed analysis with unrivaled sensitivity. It offers faster, more accurate detection of trace impurities present in pharmaceuticals samples, environmental pollutants, or other samples. …
For department/faculty use only.
Real-time PCR detection system, combining advanced optical technology with precise temperature control to deliver sensitive, reliable detection for singleplex or multiplex reactions…
For department/faculty use only.
The CFX Connect Real-Time PCR System provides excellent thermal performance for two-target multiplex PCR and routine detection of single fluorophore experiments….
For department/faculty use only.
The GloMax® Explorer is a high-performance multimode microplate reader, which can be used as a standalone plate reading instrument or integrated into a high-throughput automated workflow….
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
For department/faculty use only.
BioTek Synergy H1 is a modular multimode microplate reader, with monochromator-based optics and filter-based optics for fluorescence and luminescence detection. …
For department/faculty use only.
This UHV Vacuum Generators ESCALAB Mk2 system has upgraded with Omicron 7-Channeltron analyser with XPS, UPS and mono-XPS in one analysis chamber and a deposition (SIMS being replaced) chamber in the other….
For department/faculty use only.
Our current setup is suitable for examining crystal-like substrates/samples. Results will depend on how crystalline the sample is. Theta-two theta scan MSDS and RA are to be provided. XRD is for crystalline sample….
For department/faculty use only.
Experience simplified high-throughput sample processing and more control with the JXN-26 centrifuge with powerful high-speed features, low heat output, imbalance tolerance and quiet performance. …
For department/faculty use only.
Beckman Coulter’s Optima™ XPN ultracentrifuge is a premiere ultracentrifuge that offers networking capability and security customization, and tracking features to ensure chain of compliance. …
For department/faculty use only.
ICH 110 Memmert stability climate chambers guarantee the perfect atmosphere for climate and temperature tests. …
For department/faculty use only.
Centrifugal evaporator with vacuum…
The JSM-6700F is a field emission scanning electron microscope (FESEM) incorporating a cold cathode field emission gun, ultra-high vacuum, and sophisticated digital technologies for high-resolution, high-quality imaging of microstructures. …
For department/faculty use only.
Coating of non-conductive sample with platinum…
For department/faculty use only.
Icon XYZ Closed-Loop SPM Scan Head with nominal range of 90 µm x 90 µ and vertical range of 10 µm…
For department/faculty use only.
Spray granulation, microencapsulation, micronizing, and aggregation. Efficient powder recovery with spray dryer….
For department/faculty use only.
The Ring Shear Tester RST-XS.s is an easy to operate shear cell tester for the precise determination of flow properties of fine-grained powders and bulk solids….
For department/faculty use only.
TurboVap LV evaporation system is an automated high-speed, low-volume sample concentrator. It is an efficient alternative to the inconvenient set-up, constant monitoring and long evaporation times that are characteristic of conventional techniques. …
For department/faculty use only.
Liberty Blue is an ultra-efficient automated peptide synthesizer, delivering high-quality peptides with record low waste generation and synthesis times. …
For department/faculty use only.
The Beckman Avanti® J-26S XP High Performance Centrifuge is a fast and specialized high-speed centrifuge system exclusively designed to process up to six litres in less than 10 minutes. …
Research/Study on marine life…
The Tecnai G2 Spirit BioTWIN is fitted with the BioTWIN lens configurations, specifically designed to maximize contrast in images of inherently low-contrast and is well suited for exploring the 2D and 3D structures. The microscope is equipped with the FEI Eagle 4K digital camera. The bottom-mounted camera has a very large dynamic range, a high resolution and is optimized for high sensitivity….
MPR-6 Plasma Asher used for the removal of photoresist or other non-metallic material on the substrates like silicon wafers using plasma created by exciting ions in a gas, usually oxygen and CF4….
Technol Magnetron Sputter coater works on physical vapor deposition (PVD) method of thin film deposition by the phenomenon of sputtering at high speed at low pressure. This involves ejecting material from a “target” that is source onto a “substrate” to form thin film/coatings on the substrate….
RYJ-600D series manual hot press is suitable for heating / melting of the materials at certain temperature at a certain pressure. Applicable to polymer materials, textiles etc. It can be used as a press to test the pressure resistance of various objects and so on….
The LPKF ProtoLaser U4 is a laser-based rapid prototyping system designed to provide precise and efficient prototyping capabilities for various applications, particularly in the field of PCB (printed circuit board) prototyping. The integrated UV laser can cut individual boards out of large boards with high precision and no stress, drill holes and microvias, and create openings in solder masks. It can cut and structure LTCCs, fired ceramics, ITO/TCO substrates, delicate prepregs, and laminated materials like FR4- or RF-specific substrates….
The SUSS MJB4 Mask Aligner is a widely recognized and commonly used mask aligner system in the field of microfabrication and semiconductor manufacturing. It is designed for precise alignment and exposure of photoresist-coated substrates to patterns on a photomask, enabling the transfer of patterns onto the substrate….
The muffle furnace is designed for high-temperature heating and thermal processing in a controlled environment. It has a sealed chamber that isolates the heating elements from the material being processed, minimizing contamination and ensuring uniform temperature distribution. …
The EVOS M7000 microscope is a fully automated, no-personal-contact imaging system. It incorporates both monochrome and color high-resolution CMOS cameras for the best of both fluorescent and colorimetric imaging. The M7000 can scan multiwell plates automatically and features speedy autofocus, image acquisition, and large data processing….
This microscope performs epifluorescence, rather than confocal fluorescence microscopy. It is great for imaging immunohistochemistry samples, and also for imaging living cells in culture over extended time periods. The software allows one to image several distinct coordinates (e.g. different wells) at set time periods (e.g. every 30 minutes) on cells in culture. The temperature, CO2 and humidity controlled chamber enables live cell experiments to be performed over extended time periods, e.g. viral plaque formation assays, scratch assays etc. It is equipped with low-light digital image capture and is fully automated….
This facility aims to bring together experts in the NUHS bioinformatics community to support research needs through data analysis, data management support and education….
The Electrophysiology Core@NUS Medicine has extensive experience in (1) characterizing disease associated ion channel mutations (2) screening of novel modulators of ion channels (3) characterizing primary or hIPSC-derived neurons or cardiomyocytes. (4) performing patch clamp recording from acutely isolated brain slice (5) recording end-plate potential in neuromuscular junction from acutely isolated phrenic nerve-diaphragm preparation (6) performing whole endolysosomal recording. The core has also collaborated with various partners such as DSO, A*STAR, NTU and SGH….
Established in 2018, the NUSMed noncoding RNA (ncRNA) Core seeks to support NUS/NUHS investigators in interrogating intracellular/circulatory ncRNA profiles/functions in diverse experimental/clinical human and animal model specimens (including biofluids, fresh frozen cells/tissues and formalin-fixed paraffin-embedded tissues). To achieve this goal, we collaborate with industry partners and leverage on their cutting edge technologies to isolate/profile/perturb ncRNAs to study their expression/forms and functions in biospecimens….
The FLUOVIEW FV3000 Series is designed to meet some of the most difficult challenges in modern science. With the high sensitivity and speed required for live cell and tissue imaging and the ease of use and flexibility required for microplate imaging and complex screening protocols, the FV3000 series supports complete workflows from live cell 2D to 6D imaging through image processing, like deconvolution, and analysis. Built for fast, stable, and accurate measurements of biological reactions within living cells or tissues, even novice users can generate high-quality data and images….
The FV1000 confocal laser scanning biological microscope featured the world’s first twin scan system. This system enabled time-resolved spectroscopy of living intercellular contents and also made it possible to analyze objects down to a 2 nm wavelength resolution. Image size was increased to 4096 x 4096-pixels….
This system is capable of generating crosstalk-free multi-fluorescence images with simultaneous excitation of samples stained up to four colours. The TwinGate main beam splitter permits a myriad combinations of excitation wavelengths and excitation laser light suppression for improved single-to-noise ratio imaging. In addition, the multiple position feature simplifies the multidimensional imaging process. This microscope is also equipped with an environmental control chamber large enough to contain the objective lenses to minimize mechanical drift due to temperature difference during time-lapse imaging….
TissueFAXS can scan digital slides or images of tissue sections, Tissue Microarrays (TMA), cell culture monolayers, smears and of other samples on slides and oversized slides, in Microtiter plates, Petri dishes and plates in both bright-field and epifluorescence modes. It is capable of flexible imaging. TissueFAXS aims to make image acquisition more efficient with its adjustable autofocus scan strategy, autofocus interval range across samples and its instantaneous internal stitch features….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
This equipment quantifies the amount of C, H, N and S in solid samples….
This microscope enables surface back scatter electron imaging and ion milling….
This is an entry level TEM imaging at room temperature and cryo temperature….
This is a high-end Material electron microscopy with electron direct detector….
This is a high-end Material electron microscopy with CMOS detector….
The IVIS Spectrum is CMIF’s optical imaging system capable of bioluminescence and fluorescence imaging. The imager takes full advantage of optical probes with wavelength across the blue to near infrared region….
The Quantum FX is designed for longitudinal in vivo imaging. The imager features fast image acquisitions while maintaining a low dose and high quality images for parametric analysis….
This system is used for quantitative positron emission tomography (PET) imaging with high sensitivity and speed. It uses panel detectors allowing to image trace amounts of probes, which translates to 10x less radiation dose to the subject and the researcher….
This is a high resolution ultrasound imaging system using linear array technology and color doppler….
The scanner is equipped with the 4th generation of TIM (Total Imaging Matrix), which provides up to 204 coils elements with up to 128 independent radiofrequency channels for fast and accurate imaging. Its 70 cm open bore makes it suitable for the imaging of large subjects. MRI provides the highest spatial resolution and unmatched soft tissue contrast….
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A lightsheet microscopy with dipping lens for fast fluorescence imaging with super resolution…
A lightsheet microscopy with two orthogonally arranged dipping lenses for live imaging with isotropic resolution….
TIRF, FRAP and widefield fluorescent microscopy with DIC….
An instrument for cryosectioning of biological samples….
A high end workstation for image processing post acquisition, with licensed software: Amira, SlideBook, Imaris, Matlab….
A high end workstation for image processing post acquisition, with licensed software: Amira, Cellsens, Imaris, Huygenspro….
A high end workstation for image processing post acquisition, with licensed software: Amira, Luxbundle, Imaris, Huygenspro (with lightsheet module)….
This system enables cryo sample plunge freezing….
For department/faculty use only.
Multiphoton excitation occurs when two (or more) photons, whose summed energy is sufficient to excite a fluorophore, arrive simultaneously. The use of near infrared light to excite a fluorophore in the visible range allows multiphoton microscopy to image deeper within tissue than confocal microscopy. Additionally, since the signal is spatially confined to the focal plane of the objective, it eliminates the necessity for a confocal pinhole to generate optically sectioned images, which greatly improves detection sensitivity. The spatial confinement of signal generation also reduces overall photobleaching. These advantages make multiphoton microscopy the ideal choice for imaging deep within live tissue over long periods of time….
DSA25 is an easy-to-use, reliable instrument for measuring contact angle. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
DSA30 was specially designed to investigate the contact angle on surfaces which require very small drops for analyze. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
This device currently only accept aqueous sample. Sample digestion service is not available. The sample concentration is suggested to be diluted to ppb or ppm level and to be filtered before test if there are particles….
This device is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. The measurable range for particle size test: 0.3 nm to 10 μm….
This is a high-performance, versatile flash purification system designed for broad requirements in drug discovery and research laboratories….
This system includes both steady-state and time-resolved dual capabilities. …
Attenuated Total Reflectance (QATR 10, diamond crystal) for direct measurement of liquid, film, and powder samples….
LC–MS is an analytical chemistry technique that combines the physical separation capabilities of liquid chromatography (or HPLC) with the mass analysis capabilities of mass spectrometry (MS)…
It has measurement capability in the UV, visible and up to 3,300 nm in the near-IR region allows for characterizing samples (including solids, powders, wafers, films and liquids). It has a cuvette holder and solid sample holder….
The system is equipped with a cuvette platform, and micro-volume platform for fast measurement (seconds) of µL liquid or films….
The SOMATOM Definition Flash is a dual source, 256-slice CT, which allows for very fast acquisitions ideal for cardiac examinations. Contrast-enhanced CT angiography can be acquired using accurate bolus tracking techniques.
The system is also equipped with a fluoroscopy mode with up to 10 frames/sec for interventional CT scans….
This is a fully shielded device for gamma irradiation. The system can be used in two modes: irradiation based on time or on dose….
The Cios Alpha C-arm imaging modality is a fluoroscopy system well-suited for interventional procedures and is mainly used for cardiac applications like stenting or valve repair. In addition, it can also be used as an X-ray system….
Our 7T MRI system features diverse coils, including multi-nuclei options, and comprehensive scan protocols. It supports research in oncology, cardiology, neurology, hepatology, gastroenterology, musculoskeletal studies, angiography, spectroscopy, and the development of new MRI contrast agents. Leveraging its capabilities, MRI offers exceptional soft tissue contrast and the highest spatial resolution possible….
For department/faculty use only.
Our BD FACS Melody is a benchtop cell sorter inside the BSC. It is capable of sorting up to eight different fluorescent markers simultaneously, making it ideal for complex multi-color experiments. The system features intuitive software, automated setup, and maintenance protocols, ensuring quick and accurate sorting with minimal user intervention….
For department/faculty use only.
The MACSQuant VYB flow cytometer comes with a uniquely configured optical bench, featuring violet, yellow, and blue lasers. It is a perfect match for labs utilizing fluorescent protein reporters or for labs that want to simply use PE and FITC conjugates….
For department/faculty use only.
The Cytek Aurora leverages full spectrum technology, enabling the use of a wide array of new fluorochrome combinations without reconfiguring the system for each application. The Aurora system delivers high-resolution data at the single-cell level to resolve the most challenging cell populations, such as cells with high autofluorescence or low levels of expression of key biomarkers, regardless of assay complexity….
For department/faculty use only.
The BD FACSAria III Cell Sorter is a high-speed, high-precision flow cytometer designed for advanced cell sorting applications. It features state-of-the-art optics and fluidics systems, allowing for simultaneous sorting of up to four populations with high purity and yield. Our system offers customizable configurations with five lasers and multiple fluorescence detectors, supporting complex multi-color experiments….
The PhenoImager HT is a high-throughput imaging system designed for bright field and fluorescence scanning of tissue slides. It supports multiplexed tissue imaging, quantitative image analysis, and 3D tissue imaging. Ideal for cancer research, immunology, neuroscience, and drug development, it provides automated, high-resolution imaging for comprehensive tissue analysis, enhancing diagnostic accuracy and supporting large-scale studies….
Financial, media, software, and data company that offers financial services to organizations and companies worldwide….
It is equipped with 3 air-cooled lasers and can perform up to 9 color flow cytometry analyses. It supports 2 and 4-way bulk sorting to tubes, as well as single-cell sorting to multi-well plates (ranging from 6 to 384 wells) or microscope slides.…
The Operetta CLS system combines speed and sensitivity with the powerful and intuitive data analysis. The Operetta CLS system is part of our comprehensive HCS workflow: everything from HCS systems and microplates to automation and informatics for every application….
The Quantitative Proteomics Core (QPC) at CSI Singapore, NUS, has a dedicated and experienced team supporting quantitative proteomics applications in biomedical research. We provide comprehensive end-to-end solutions for quantitative proteomics needs, from consultation to sample preparation, measurement, analysis, data storage, and data visualisation with in-house bioinformatics pipelines. Collaborators need to only focus on their experiments and pass their samples to us for processing. Contact us for discussion….
LSM 880 is a motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels, tiles, FCS, FRAP) of live samples with super-resolution detection capability. Accomplished through its honeycomb 32 channel Airyscan GasPD, the system is able to increase spatial resolution 1.7x in each dimension (140 nm lateral and 400 nm axial resolution) and achieve 4x faster temporal super-resolution imaging, requiring 8x lower laser power while increasing the sensitivity. The system is especially suited for dynamic life cell imaging….
The Vectra 2 System is an advanced automated imaging platform designed for multiplexed tissue analysis. It combines bright field and multispectral fluorescence imaging to capture high-resolution images of tissue sections. The system supports the simultaneous visualization and quantification of multiple biomarkers, making it ideal for research in oncology, immunology, and pathology. With automated slide scanning, robust image analysis software, and high-throughput capabilities, the Vectra 2 System enables detailed and accurate tissue analysis, enhancing the efficiency and effectiveness of complex biomedical research studies….
This confocal spinning disk microscope has the capability to automatically acquire images in multiwell plates and slides. The automated acquisition advances the imaging process and allows the researcher to study their project in an impartial way. It is suited for wide variety of samples on the Phenix, e.g. single layer cell lines, multilayer neuronal cultures, tissue sections and organoids. The Phenix is equipped with CO2 and temperature control features, enabling the capture of live cell images and time courses. A plate handler and incubator allow the automated imaging of multiple plates….
The INST1000A PhenoCycler & PhenoImager Fusion is a cutting-edge imaging system that combines bright field and fluorescence imaging capabilities for comprehensive tissue analysis. This system is an advanced automated system designed for high-plex single-cell spatial proteomics. It enables rapid, multiplexed imaging of tissue samples, allowing researchers to visualize and quantify numerous biomarkers simultaneously. The PhenoCycler offers high-resolution imaging, fast cycle times, and robust data integration capabilities, making it ideal for applications in cancer research, immunology, and neuroscience. It streamlines complex tissue analysis workflows, enhancing the accuracy and efficiency of high-throughput studies….
This system allows profiling of RNA and protein expression from distinct tissue compartments and cell populations with an automated and scalable workflow that integrates with standard histology staining….
This system is capable of up to 8 colour sorting, supports 2 and 4-way bulk sorting to tubes and single-cell sorting to well plates (ranging from 6 to 384 wells). The FACSMelody features user-friendly FACSChorus software, allowing for self-operation….
This system is equipped with 5 lasers, enables users to perform up to 28-color cell analyses.…
The system has multichannel capabilities to run multiple experiments simultaneously. Every individual channel is independent….
A multifunctional compact scanning system equipped with a Scanning Electrochemical Microscopy (SECM), a Scanning Vibrating System (SVET), a LEIS (Localised Electrochemical Impedance Spectroscope) and a Scanning Kelvin Probe (SKP)….
The system allows measurement of the zeta potential down to a few millivolt at the solid/liquid interface by means of streaming potential and streaming current measurement. …
The equipment is capable of measuring the mechanical properties of samples (in air as well in liquid media) under controlled environmental conditions of temperature, pH and relative humidity (RH)….
The furnance is to perform chemical reactions, annealing of materials, devices in ambient conditions….
It is equipped with 5 air-cooled lasers and can perform up to 14 color flow cytometry analyses. It supports 2 and 4-way bulk sorting to tubes, as well as single-cell sorting to multi-well plates (ranging from 6 to 384 wells) or microscope slides.…
Motorized inverted brightfield and fluorescence trinocular microscope. The microscope is fully enclosed in a heated environmental chamber and could set, maintain and monitor temperature, humidity, CO2 and O2 levels as imaging conditions dictate. Colibri 2 LED lamps allow adjustment of each illumination intensity depending on the sensitivity of the sample. The narrow-band illumination reduces cross-stimulation, increasing the sensitivity of your images…
True spectral imaging with AOBS (acousto-optical programmable beam splitter) provides highest flexibility switching in microseconds prolong sample viability with low power lasers. Tandem scanner with resonance scanner allows ultrafast 420 frames/sec (at 512 x 16 scan format) that is up to 50% faster image acquisition. Highly sensitive HyD detector allows a reduction of light dosage delivered to the cells, reducing photo-toxicity, and for detection of very low signals. The 3D rendering and imaging processing tools provide superb 3D reconstruction and high-quality images for analysis and publication….
Thermo Scientific Vacutherm Vacuum Heating and Drying Ovens provide outstanding capabilities for fast and gentle drying. Excellent heat transfer and fast heating up minimizes operation time….
The Instron 5965 is a universal testing equipment for performing tensile, compressive, shear, flexural, peel, tear and cyclic tests….
The QIDI Tech X-Max 3 is a large print size, industrial grade FDM 3D printer that is engineered for speed and precision…
The MA-3030 Impulse magnetizer is designed to produce a short duration high-field pulse for the purpose of magnetizing geological samples. The unit is rated to deliver accurate reproducible fields less than 60 KGauss, using the axial magnetizing coil for magnetic field ranges….
The Covance-2MPR is a multi-purpose O2 plasma process system with stable and homogeneous plasma discharge. It is usually used for applications such as PDMS-PDMS bonding, PDMS-glass bonding, surface chemistry modification (eg. hydrophilic/hydrophobic), surface cleaning, plasma grafting and cell attachment….
The Keyence VK-X1000K is a non-contact 3D laser profiler designed for high-precision surface measurement and analysis. It combines confocal microscopy and laser scanning technologies to provide high-resolution imaging and precise 3D surface measurements of various samples….
The DSX1000 Digital Microscope offers high-resolution imaging, flexible observation modes, and advanced measurement capabilities. It provides precise and efficient imaging for a wide range of applications. Only white light illumination is available….
The Labcoter™ 3 (PDS 2010) is a Parylene Deposition System that applies a clear, uniform, and smooth Parylene coating of consistent thickness to a substrate. The coating is uniform and creates an extremely effective chemical barrier that is moisture resistant, mechanically strong, and exhibits a high dielectric constant. With Parylene deposition there is no intermediate liquid phase or separate curing cycle. The machine is typically designed to handle a variety of substrates, including metals, ceramics, plastics, and composites….
The KBF-S 115 is a constant climate chamber with a large temperature and humidity range. It is typically used for shelf-life testing….
The VLS2.30 Desktop Laser is a compact and economical platform, designed to be an entry level laser system. It is mainly used for cutting planar acrylic….
The Trotec Speedy 360 laser cutter is a versatile and high-performance cutting and engraving machine. Its advanced laser technology offers fast and precise cutting of a wide range of materials….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The JEM-1400Flash is equipped with a high-sensitivity sCMOS camera, “Matataki Flash”, JEOL’s innovative high-sensitivity sCMOS camera that dramatically reduces the readout noise while possessing high frame rate. This powerful feature enables high-throughput acquisition of sharp TEM images with extremely low-noise. The Limitless Panaroma (LLP) is a montage system capable of utilizing stage drive for the field shift. This new system allows for simple capture of a montage panorama image over a limitless wide area. Thus, an ultra-wide area, high pixel-resolution image is obtainable….
The Quanta 650 features a large sample chamber that enables imaging of samples of all sizes. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. Surface imaging with beam deceleration mode is possible to obtain surface and compositional information. Easy to use and intuitive controls make highly effective operation possible for novice users. The MAPS software does automatic acquisition of large overviews at any magnification, allowing high resolution imaging of large areas….
The JSM-6701F is suitable for observation of fine structures such as multi-layered film and nano particles fabricated by the nano technology. The high-resolution semi in-lens enables one to observe delicate specimens with minimum damage at very low accelerating voltages. At lower voltages, the fine surface structures can be observed more clearly than at higher voltages. It can be used to collect topographic information (SE and LEI mode) and observe elemental contrast (BSE mode) in the sample….
Luminex® xMAP® technology combines advanced fluidics, optics, and digital signal processing with proprietary microsphere technology to deliver both high density and high throughput multiplexed assay capabilities at the same time….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The MoFlo Astrios is the new standard for cell sorting with functionality, speed, and improved sensitivity. It is designed for researchers who desire high productivity with more analytical capability and with biosafety solutions. The ergonomic design of Astrios makes it faster and easier to operate. All components requiring operator control are within easy reach….
The BD LSRFortessa™ cell analyzer offers the ultimate choice for flow cytometry, providing power, performance, and consistency. Designed to be affordable and expandable, the BD LSRFortessa has the flexibility to support the expanding needs of multicolor flow cytometry assays….
The CytoFLEX LX Flow Cytometer is an expansion of the CytoFLEX Platform. This model expands research possibilities with up to six lasers and 21 color parameters. Six spatially separated lasers allows panels to be spread across the spectrum reducing cross talk and spectral overlap….
Flow NanoAnalyzer can be used for the multiparameter characterization of natural and synthetic nanoparticles (7-1000 nm) at the single-particle level. Combining light scattering and fluorescence detection, high-resolution distributions of particle size and biochemical properties can be acquired simultaneously in 1-2 minutes….
The SP8 DIVE (Deep In Vivo Explorer) is the first multiphoton microscope with spectrally tunable detection. This microscope provides spectral freedom, and offers unlimited flexibility and enables users to develop new multicolor deep in vivo experiments.The SP8 DIVE also provides maximum penetration depth and best contrast, and the new Vario Beam Expander can be tuned for improved penetration depth of more than 1 mm and maximum resolution….
An ultracentrifuge is a high-speed centrifuge used to separate particles based on density, such as proteins, nucleic acids, and cellular components, in research and industrial applications….
This PCR equipment amplifies specific DNA segments, enabling detailed analysis for applications in research, diagnostics, and forensics….
This PET-CT equipment combines Positron Emission Tomography (PET) and Computed Tomography (CT) in one scanner. It provides detailed images by detecting metabolic activity (PET) and anatomical structures (CT), helping diagnose, stage, and monitor diseases like cancer….
This Aerosol Infection System generates controlled airborne particles containing pathogens to study respiratory infections. It ensures precise dosing and safety for researching disease transmission, vaccine efficacy, and treatments….
The central HPC facility provides computing resources to support compute-intensive research and AI workloads, including the provisioning of many-cores CPU, GPU, and high-speed data storage….
A central service to host large-scale research data for archival purpose….
The service provides access to AWS & GCP cloud platform for researchers to use their services. NUS IT offers this service to onboard the researchers’ account under NUS subscription to enjoy private discounts on both platform (10-20% depending on the service)….
The service provides rack spaces for researchers to host their servers and other rack-mounted IT equipment….
The laser writer tool is designed for definition of planar geometries and for surface diagnostics, in applications where maximum resolutions down to 0.7 um are required. The system transforms a laser beam into a controlled writing tool for photolithographic mask fabrication or for direct in situ processing on planar substrates. This also eliminates the requirement of mask for optical lithography….
The DRIE uses special gases for standard industry semiconductor etching purpose. It is able to etch the samples in 2 modes, Bosch (chiller mode) and the Cryo (liquid nitrogen mode which could go to sub 20°C). Apart from being able to etch silicon substrates, it could be used to etch oxides and nitrides and provide good selectivity. It is also equipped with a load-lock and the processes are automated and user-friendly….
Type A2 Canopy duct BSC with NSF49 enhanced and certified annually…
Type B2 BSC with NSF49 enhanced and certified annually…
Class III BSC with NSF49 enhanced and certified annually…
Class I Enclosure with NSF49 enhanced and certified annually…
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
The MAGPIX® system integrates fluidics, mechanical, electronic, and optical subsystems with magnetic microspheres and advanced computer analysis to perform multiplex assays. Magnetic beads coated with specific reagents capture and detect analytes from samples. The sample is aspirated and conveyed into a camera chamber, where beads are immobilized and imaged under red and green LEDs. The red LED classifies the beads by color signature, while the green LED measures reporter fluorescence to quantify captured analytes. Beads are then flushed out, readying the system for the next sample….
The FlexStation 3 reader combines Molecular Devices SpectraMax® M5e Multi-Mode Microplate Reader performance with an integrated 8- or 16-channel pipettor into one compact benchtop reader. This integrated system provides users with a multi-detection platform capable of increasing the liquid handling throughput and flexibility for biochemical- and cell-based kinetic assays….
THUNDER Imagers tackle biologically-relevant 3D models, providing high-speed, multicolour imaging for both thin and thick samples. They offer enhanced temporal resolution and real-time clarity of details, even deep within intact specimens, eliminating out-of-focus blur. …