CryoTEM Krios G4 is the latest and most advanced CryoTEM commissioned and opened in 2025. It’s equipped with cold-FEG, Panther STEM detector, EMPAD, CetaD camera and Selectris Energy filter with Falcon4i electron direct detector….
CryoTEM Krios G4 is the latest and most advanced CryoTEM commissioned and opened in 2025. It’s equipped with cold-FEG, Panther STEM detector, EMPAD, CetaD camera and Selectris Energy filter with Falcon4i electron direct detector….
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
This is a high-end Cryo electron microscopy with electron direct detector….
XDD beam line and its experimental station are designed for a general purpose of diffractometry, fluorescence detection and absorption spectroscopy, which will serve the research and development with structural determination, characterization and process monitoring in universities, institutes and industry in Singapore and the region….
The Versa 3D DualBeam FEG FIB-SEM combines a focused Ga ion beam with a high-resolution field-emission electron gun. Owing to a large chamber allowing up to 6″ industry wafers with full rotation, the Versa 3D provides enhanced 2D and 3D materials characterization and analysis for a wide range of material science and industry-related samples….
Our most advanced XPS AXIS Supra+ provides a range of applications for surface science analysis. It comes with a heat and cool accessories that allow samples mounted on the sample holder to be heated up to +800°C or cooled to <100°C within the Flexi-lock and/or Sample Analysis Chamber....
High-definition positron emission tomography (HD-PET) scanner combined with a 128 slices Computed tomography (CT) scanner for high resolution anatomical co-registration. The 78 cm bore opening allows for the scanning of large subjects with a uniform resolution of the PET images of 2 mm….
The Electron Microscopy Unit (EMU) at the Yong Loo Lin School of Medicine, NUS, is a core facility within the Microscopy Cluster that provides advanced transmission and scanning electron microscopy, along with essential sample preparation tools such as ultramicrotomes. …
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
The JSM-IT710 HR SEM is a high resolution SEM with the simple SEM function and Zeromag mode, that provides the versatility to handle a wide variety of samples and workflow designed for fast results. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. The SEM is also equipped with Oxford AZtecLiveLite EDS software and Xplore 65 detector for elemental analysis. The SEM has capabilities to perform automatic acquisition for volume EM with the Array Tomography software or Serial Block Face software, with the ConnectomX Katana microtome attached. …
A versatile AFM that can capture images of air-sensitive materials that are inherently distortion-free and reproducible. Equipped with easy tip exchange combined with SmartScan software’s one-click imaging and pre-programmed advanced modes. …
LED I-V tester performs I-V measurement to determine the power conversion efficinecy of solar cell. It uses LED light enigne as light source, with illumination area of 16 cm x 16 cm. It is ideal for performing measurement of 5 busbar M2 sized solar cell….
Xenon-lamp based I-V tester performs I-V measurement to determine the power conversion efficiency of solar cell. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
Xenon-lamp based flash I-V tester performs I-V measurement to determine the power conversion efficiency of photovoltaic module. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
Custom setup to perform outdoor Potential Induced Degradation stress on PV module. System will apply up to +1500 or -1500 V to the PV modules for a specified duration….
Extra Ultraviolet (EUV) Branch Beamline is a second branch of the main SINS beamline. Its primary purpose is to measure the reflectivity of EUV optical components…
The soft X-ray-ultraviolet (SUV) beamline is a state-of-the-art beamline producing photons with selective polarizations. It covers the photon energy range from soft X-ray to ultraviolet, which can be used for various advanced optical, spectroscopy and scattering measurements. This integrated characterization-and-growth facility aims to study and distinguish the interplay between spin, charge, orbital and lattice degrees of freedom of advanced materials from solid state physics to biological systems, with various forms, e.g. nanoparticle, ultrathin film to bulk….
General purpose SEM that performs imaging of surface morphology of conductive samples, using electrons as the beam. Useful for studying surfaces with sub-micrometer structures….
ISMI (Infrared Spectro/Microscopy) beamline provides a state-of-the-art Fourier Transform IR spectrometer and microscope to supply diffraction-limited spatial resolution to an ever-widening range of infrared spectroscopy experiments. Synchrotron based source provides a versatile infrared radiation that covers a spectral range from 10000 to 10 cm-1 and has considerable brightness advantages over conventional (thermal) IR sources enabling IR experiments with high resolution and studies of extremely small or diluted samples….
SINS facility uses a bending magnetic beamline to deliver photon with an energy range from 50-1200 eV for end-station to cover the K-edges of light elements (C, N, and O) and L-edges of transition metals, and M-edges of part of rare earth metals, with user selectable linear and circular polarization for soft x-ray photon. There are two measurement chambers (main chamber and XMCD chamber) in the end-station, which are designed for X-ray photoelectron spectroscopy (XPS), angle-resolved photoemission (ARPES), X-ray absorption spectroscopy (XAS), X-ray linear dichroism (XMLD) and X-ray magnetic circular dichroism (XMCD) experiments….
This equipment is used for deep tissue observation, 3D image reconstruction and live cell imaging….
This analyzer measures and reports the oxygen consumption rate (OCR), proton efflux rate (PER) or extracellular acidification rate (ECAR), as well as ATP production rates of live cells in a 96-well format. It features excellent OCR precision at low rates, verified instrument performance, optimized temperature control, and is automation enabled….
The LSM710 is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels). It is optimized for imaging of cells, tissues, and small organisms….
The 6550 iFunnel Q-TOF LC/MS system offers both high sensitivity and high-resolution mass detection. It is ideally suited for proteomics research and untargeted analyte detection….
A chamber to perform UV light soaking as an accelerated degradation test for PV modules….
LC-QTOF is a versatile analytical technique that enables the identification and characterization of unknown compounds in complex samples. It is not limited to a specific research area and finds applications in various scientific disciplines….
LC-QQQ is an analytical technique commonly used for targeted quantitative analysis in various fields. It is particularly useful in areas such as environmental monitoring, food safety testing, and clinical research….
The FV3000NIR is a high-speed motorised confocal laser scanning microscope with NIR imaging capability. Equipped with both galvanometer and resonant scanners, it is suitable for imaging of live and fixed samples in multiple dimensions (xyzt in multiple channels)…
The SAFe 360 STORM is a highly motorised laser scanning microscope for multiple 3D SMLM modalities: PALM, dSTORM , PAINT, and single particle tracking….
The A1r inverted is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels) of fixed samples….
A slide scanner for automated imaging of large numbers of slides for fluorescence, brightfield and polarization….
The FV3000 is a high-speed motorised confocal laser scanning microscope. Equipped with both galvanometer and resonant scanners, it is suitable for imaging live and fixed samples in multiple dimensions (xyzt in multiple channels)….
A live cell, real-time analysis of cellular energy metabolism platform….
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
The X1-STORM is a multi-modal system that boasts super-resolution fluorescence microscopy and live-cell spinning-disk confocal microscopy by combining N-STORM capabilities and CSU-X1 hardware on one microscope body, united by MetaMorph software….
The iLAS2 TIRF is a total internal reflection fluorescence microscope for imaging close to the coverslip surface in multiple dimensions (xyt in multiple channels)….
The FIBSEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
The JEM-2800 is an advanced workhorse 200 kV transmission electron microscope with a Schottky-type field emission electron source. This multi-purpose S/TEM employs an user-friendly, high-stability operating system for high-resolution imaging in TEM (including diffraction modes) and STEM (imaging and EDS). Equipped with a TMP vacuum system, the JEM-2800 is particularly suited for fast screening of multiple samples….
The scanning electron microscope utilizes a focused beam of electrons to scan the surface of a sample. As the electron beam interacts with the specimen, it generates signals such as secondary electrons, backscattered electrons, and characteristic X-rays. These signals are detected and processed to create an image, revealing the topography, composition, and other features of the sample at high magnifications….
The JEM-ARM200F is a 200 kV cold field-emission, probe-corrected transmission electron microscope with a STEM resolution of 0.078 nm and TEM resolution of 0.1 nm. It also has an energy-dispersive X-ray detector and dual energy loss spectrometers that can form elemental maps at atomic resolution, and a fast CMOS camera. With its probe aberration corrector and ultra-high-resolution pole piece it is particularly suited to STEM imaging and analysis….
The Fischione 1051 TEM Mill allows for the preparation of TEM lamella samples through dual argon ion beams. Equipped with a touchscreen interface and camera, it can be operated through digital inputs as well as remotely….
The Leica EM RES102 has two saddlefield ion sources with variable ion energies, with the capability of mounting a variety of samples for argon ion milling, including SEM and TEM samples….
The Ion Slicer can prepare thin-film specimens without solvents or chemicals and requires no prior treatment of the specimen other than rectangular slicing (no disc grinding or dimple grinding)…
The FEI Helios 450S FIB is a dual beam Ga+ ion & electron microscope with high-resolution topographical imaging and patterning capabilities. The electron beam is primarily used for surface characterization, while the ion beam is used for top-down fabrication tasks such as TEM lamella preparation, cross-section failure analysis, and nanoscale surface modification. The stability of the low voltage ion beam and chamber cleaning attachments reduces contamination and amorphization vital for S/TEM analysis….
The Orion NanoFab Helium Ion Microscope (HIM) operates using ionized Helium or Neon gases rather than electrons for imaging and milling of materials. With the significantly smaller interaction volume, alongside the smaller de Broglie wavelength, the HIM can achieve finer spatial resolution and larger depth-of-field compared to a FE-SEM. Nanomachining fabrication with sub-10 nm feature sizes is achievable through lighter He ions, while faster milling is operated through heavier Ne ions….
This equipment is able to analyze the surface morphology and composition of a wide range of samples, including metals, biological specimens, and nanomaterials at the micro and nanometer scale….
Imaging of a specimen’s internal structure and composition at the atomic scale, allowing detailed visualization of cellular structures, materials, and nanostructures. can achieve resolution at the sub-nanometer scale, with less than 10 nanometers (nm)….
The Park NX10 AFM features a True Non-Contact™ scan Mode that produces high resolution and accurate data by preventing destructive tip-sample interaction during a scan. Its compact and rigid ‘Step-and-Scan’ enables programmable multiple region imaging….
The Renishaw Raman Microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
The Renishaw Raman microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
This system enables chemiluminescent western blot imaging, DNA gel imaging, fluorescent western blot imaging and protein gel imaging….
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
Near-infrared II in vivo imaging…
The nanoScan® SPECT system images radiotracers with absolute quantification, high sensitivity and high spatial resolution down to 0.3 mm in vivo. In addition, a wide range of patented multi-pinhole collimators is available with optimized performance for any applications: from whole-body to focused scanning; imaging of mice, multiple mice, large rats and rabbits; from low energy tracers to theranostic isotopes….
AniView Pro series is an upgrade of the previous generation of AniView products, adopting a new appearance and more professional structural design. At the same time, the application function has also been enhanced to match more filters, and a new spectral separation function has been added to allow the separation of multiple fluorescent probes, so as to reduce the interference of fluorescent background on experimental results, making it an excellent partner for scientific research experiments….
The ZONETEM II utilizes vacuum-controlled UV irradiation to gently eliminate hydrocarbon contamination for electron microscopy imaging….
The Gatan Solarus II is a plasma cleaning system for removing organic surface contaminants through user-defined gas-flow plasma….
This station is used to store TEM holders….
The Olympus DSX1000 is an upright fully digital microscope with automated xyz and focusing functions. The tilting head allows sample imaging from multiple angles and lens can be selected for a variety of field-of-views….
The ECLIPSE Ti2 is an inverted microscope delivering 25 mm field of view with stable, drift-free platform for high-speed imaging applications….
The Leica Ultracut UCT ultramicrotome is an instrument commonly used to prepare TEM samples. It uses either a glass or diamond knife to cut ultra thin sections of specimens embedded in epoxy. The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width and can be stained and mounted onto TEM grids for viewing….
The Bruker AFM is able to operate in 2 modes, ICON AFM Scanner and Fast Scan ADM scanner. The fast scan mode provides X-Y tip velocity of >2 mm per sec, hence is able to scan a sample within a short span of 15 mins. There are also various modes to use, such as the nanomechanical mapping, nanomanipulation, surface potential etc….
The FEI Verios 460 is one of the leading extreme high resolution SEM family. It provides sub-nanometer resolution from 1~30 keV and enhanced contract needed for precise measurements on materials in advanced semiconductor manufacturing and advanced materials science applications. Our system is equipped with various detectors (in-column detector, ICD for high resolution imaging, STEM detector for scanning transmission electron microscopy of thin membrane etc). It also possesses electron back scattered diffraction, EBSD for crystal orientation mapping….
The Alpha 300R offers unique ability to acquire chemical information non-destructively. It allows you to observe and analyse the distribution of different phases within a sample in ambient conditions without the need to specially prepare your samples. In addition to chemical compounds, analysis of physical properties such as crystallinity or materials stress are also possible….
The Protochips Atmosphere allows the in-Operando study of materials under realistic environmental conditions. Based on a TEM holder closed-cell design, Atmosphere is a fully automated system that includes a computer controlled gas manifold and a feature-rich software interface….
The device has excellent versatility and high performance for measurements of parts and electrical components, with sub-micron precision….
The Lightning in-situ TEM biasing & heating holder provides real-time information under a controllable electrical and thermal environment in the microscope….
The Elsa cryo-transfer holder is a single-tilt liquid nitrogen holder designed for the frost-free transfer of a sample at liquid nitrogen temperature….
The Mel Build Defend Atmos Defend holder incorporates a specially designed vacuum transfer system and a mechanical drift cancellation controller. The holder can be tilted along two axes and cooled down to -160°C….
The JSM-6700F is a field emission scanning electron microscope (FESEM) incorporating a cold cathode field emission gun, ultra-high vacuum, and sophisticated digital technologies for high-resolution, high-quality imaging of microstructures. …
For department/faculty use only.
Icon XYZ Closed-Loop SPM Scan Head with nominal range of 90 µm x 90 µ and vertical range of 10 µm…
The Tecnai G2 Spirit BioTWIN is fitted with the BioTWIN lens configurations, specifically designed to maximize contrast in images of inherently low-contrast and is well suited for exploring the 2D and 3D structures. The microscope is equipped with the FEI Eagle 4K digital camera. The bottom-mounted camera has a very large dynamic range, a high resolution and is optimized for high sensitivity….
The EVOS M7000 microscope is a fully automated, no-personal-contact imaging system. It incorporates both monochrome and color high-resolution CMOS cameras for the best of both fluorescent and colorimetric imaging. The M7000 can scan multiwell plates automatically and features speedy autofocus, image acquisition, and large data processing….
This microscope performs epifluorescence, rather than confocal fluorescence microscopy. It is great for imaging immunohistochemistry samples, and also for imaging living cells in culture over extended time periods. The software allows one to image several distinct coordinates (e.g. different wells) at set time periods (e.g. every 30 minutes) on cells in culture. The temperature, CO2 and humidity controlled chamber enables live cell experiments to be performed over extended time periods, e.g. viral plaque formation assays, scratch assays etc. It is equipped with low-light digital image capture and is fully automated….
The FLUOVIEW FV3000 Series is designed to meet some of the most difficult challenges in modern science. With the high sensitivity and speed required for live cell and tissue imaging and the ease of use and flexibility required for microplate imaging and complex screening protocols, the FV3000 series supports complete workflows from live cell 2D to 6D imaging through image processing, like deconvolution, and analysis. Built for fast, stable, and accurate measurements of biological reactions within living cells or tissues, even novice users can generate high-quality data and images….
The FV1000 confocal laser scanning biological microscope featured the world’s first twin scan system. This system enabled time-resolved spectroscopy of living intercellular contents and also made it possible to analyze objects down to a 2 nm wavelength resolution. Image size was increased to 4096 x 4096-pixels….
This system is capable of generating crosstalk-free multi-fluorescence images with simultaneous excitation of samples stained up to four colours. The TwinGate main beam splitter permits a myriad combinations of excitation wavelengths and excitation laser light suppression for improved single-to-noise ratio imaging. In addition, the multiple position feature simplifies the multidimensional imaging process. This microscope is also equipped with an environmental control chamber large enough to contain the objective lenses to minimize mechanical drift due to temperature difference during time-lapse imaging….
TissueFAXS can scan digital slides or images of tissue sections, Tissue Microarrays (TMA), cell culture monolayers, smears and of other samples on slides and oversized slides, in Microtiter plates, Petri dishes and plates in both bright-field and epifluorescence modes. It is capable of flexible imaging. TissueFAXS aims to make image acquisition more efficient with its adjustable autofocus scan strategy, autofocus interval range across samples and its instantaneous internal stitch features….
This microscope enables surface back scatter electron imaging and ion milling….
This is an entry level TEM imaging at room temperature and cryo temperature….
This is a high-end Material electron microscopy with electron direct detector….
This is a high-end Material electron microscopy with CMOS detector….
The IVIS Spectrum is CMIF’s optical imaging system capable of bioluminescence and fluorescence imaging. The imager takes full advantage of optical probes with wavelength across the blue to near infrared region….
The Quantum FX is designed for longitudinal in vivo imaging. The imager features fast image acquisitions while maintaining a low dose and high quality images for parametric analysis….
This system is used for quantitative positron emission tomography (PET) imaging with high sensitivity and speed. It uses panel detectors allowing to image trace amounts of probes, which translates to 10x less radiation dose to the subject and the researcher….
This is a high resolution ultrasound imaging system using linear array technology and color doppler….
The scanner is equipped with the 4th generation of TIM (Total Imaging Matrix), which provides up to 204 coils elements with up to 128 independent radiofrequency channels for fast and accurate imaging. Its 70 cm open bore makes it suitable for the imaging of large subjects. MRI provides the highest spatial resolution and unmatched soft tissue contrast….
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A lightsheet microscopy with dipping lens for fast fluorescence imaging with super resolution…
A lightsheet microscopy with two orthogonally arranged dipping lenses for live imaging with isotropic resolution….
TIRF, FRAP and widefield fluorescent microscopy with DIC….
A high end workstation for image processing post acquisition, with licensed software: Amira, SlideBook, Imaris, Matlab….
A high end workstation for image processing post acquisition, with licensed software: Amira, Cellsens, Imaris, Huygenspro….
A high end workstation for image processing post acquisition, with licensed software: Amira, Luxbundle, Imaris, Huygenspro (with lightsheet module)….
For department/faculty use only.
Multiphoton excitation occurs when two (or more) photons, whose summed energy is sufficient to excite a fluorophore, arrive simultaneously. The use of near infrared light to excite a fluorophore in the visible range allows multiphoton microscopy to image deeper within tissue than confocal microscopy. Additionally, since the signal is spatially confined to the focal plane of the objective, it eliminates the necessity for a confocal pinhole to generate optically sectioned images, which greatly improves detection sensitivity. The spatial confinement of signal generation also reduces overall photobleaching. These advantages make multiphoton microscopy the ideal choice for imaging deep within live tissue over long periods of time….
DSA25 is an easy-to-use, reliable instrument for measuring contact angle. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
DSA30 was specially designed to investigate the contact angle on surfaces which require very small drops for analyze. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
This device currently only accept aqueous sample. Sample digestion service is not available. The sample concentration is suggested to be diluted to ppb or ppm level and to be filtered before test if there are particles….
This device is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. The measurable range for particle size test: 0.3 nm to 10 μm….
This is a high-performance, versatile flash purification system designed for broad requirements in drug discovery and research laboratories….
This system includes both steady-state and time-resolved dual capabilities. …
Attenuated Total Reflectance (QATR 10, diamond crystal) for direct measurement of liquid, film, and powder samples….
LC–MS is an analytical chemistry technique that combines the physical separation capabilities of liquid chromatography (or HPLC) with the mass analysis capabilities of mass spectrometry (MS)…
It has measurement capability in the UV, visible and up to 3,300 nm in the near-IR region allows for characterizing samples (including solids, powders, wafers, films and liquids). It has a cuvette holder and solid sample holder….
The system is equipped with a cuvette platform, and micro-volume platform for fast measurement (seconds) of µL liquid or films….
The SOMATOM Definition Flash is a dual source, 256-slice CT, which allows for very fast acquisitions ideal for cardiac examinations. Contrast-enhanced CT angiography can be acquired using accurate bolus tracking techniques.
The system is also equipped with a fluoroscopy mode with up to 10 frames/sec for interventional CT scans….
The Cios Alpha C-arm imaging modality is a fluoroscopy system well-suited for interventional procedures and is mainly used for cardiac applications like stenting or valve repair. In addition, it can also be used as an X-ray system….
Our 7T MRI system features diverse coils, including multi-nuclei options, and comprehensive scan protocols. It supports research in oncology, cardiology, neurology, hepatology, gastroenterology, musculoskeletal studies, angiography, spectroscopy, and the development of new MRI contrast agents. Leveraging its capabilities, MRI offers exceptional soft tissue contrast and the highest spatial resolution possible….
The PhenoImager HT is a high-throughput imaging system designed for bright field and fluorescence scanning of tissue slides. It supports multiplexed tissue imaging, quantitative image analysis, and 3D tissue imaging. Ideal for cancer research, immunology, neuroscience, and drug development, it provides automated, high-resolution imaging for comprehensive tissue analysis, enhancing diagnostic accuracy and supporting large-scale studies….
The Operetta CLS system combines speed and sensitivity with the powerful and intuitive data analysis. The Operetta CLS system is part of our comprehensive HCS workflow: everything from HCS systems and microplates to automation and informatics for every application….
The Quantitative Proteomics Core (QPC) at CSI Singapore, NUS, has a dedicated and experienced team supporting quantitative proteomics applications in biomedical research. We provide comprehensive end-to-end solutions for quantitative proteomics needs, from consultation to sample preparation, measurement, analysis, data storage, and data visualisation with in-house bioinformatics pipelines. Collaborators need to only focus on their experiments and pass their samples to us for processing. Contact us for discussion….
LSM 880 is a motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels, tiles, FCS, FRAP) of live samples with super-resolution detection capability. Accomplished through its honeycomb 32 channel Airyscan GasPD, the system is able to increase spatial resolution 1.7x in each dimension (140 nm lateral and 400 nm axial resolution) and achieve 4x faster temporal super-resolution imaging, requiring 8x lower laser power while increasing the sensitivity. The system is especially suited for dynamic life cell imaging….
The Vectra 2 System is an advanced automated imaging platform designed for multiplexed tissue analysis. It combines bright field and multispectral fluorescence imaging to capture high-resolution images of tissue sections. The system supports the simultaneous visualization and quantification of multiple biomarkers, making it ideal for research in oncology, immunology, and pathology. With automated slide scanning, robust image analysis software, and high-throughput capabilities, the Vectra 2 System enables detailed and accurate tissue analysis, enhancing the efficiency and effectiveness of complex biomedical research studies….
This confocal spinning disk microscope has the capability to automatically acquire images in multiwell plates and slides. The automated acquisition advances the imaging process and allows the researcher to study their project in an impartial way. It is suited for wide variety of samples on the Phenix, e.g. single layer cell lines, multilayer neuronal cultures, tissue sections and organoids. The Phenix is equipped with CO2 and temperature control features, enabling the capture of live cell images and time courses. A plate handler and incubator allow the automated imaging of multiple plates….
The INST1000A PhenoCycler & PhenoImager Fusion is a cutting-edge imaging system that combines bright field and fluorescence imaging capabilities for comprehensive tissue analysis. This system is an advanced automated system designed for high-plex single-cell spatial proteomics. It enables rapid, multiplexed imaging of tissue samples, allowing researchers to visualize and quantify numerous biomarkers simultaneously. The PhenoCycler offers high-resolution imaging, fast cycle times, and robust data integration capabilities, making it ideal for applications in cancer research, immunology, and neuroscience. It streamlines complex tissue analysis workflows, enhancing the accuracy and efficiency of high-throughput studies….
The system has multichannel capabilities to run multiple experiments simultaneously. Every individual channel is independent….
A multifunctional compact scanning system equipped with a Scanning Electrochemical Microscopy (SECM), a Scanning Vibrating System (SVET), a LEIS (Localised Electrochemical Impedance Spectroscope) and a Scanning Kelvin Probe (SKP)….
The system allows measurement of the zeta potential down to a few millivolt at the solid/liquid interface by means of streaming potential and streaming current measurement. …
The equipment is capable of measuring the mechanical properties of samples (in air as well in liquid media) under controlled environmental conditions of temperature, pH and relative humidity (RH)….
Motorized inverted brightfield and fluorescence trinocular microscope. The microscope is fully enclosed in a heated environmental chamber and could set, maintain and monitor temperature, humidity, CO2 and O2 levels as imaging conditions dictate. Colibri 2 LED lamps allow adjustment of each illumination intensity depending on the sensitivity of the sample. The narrow-band illumination reduces cross-stimulation, increasing the sensitivity of your images…
True spectral imaging with AOBS (acousto-optical programmable beam splitter) provides highest flexibility switching in microseconds prolong sample viability with low power lasers. Tandem scanner with resonance scanner allows ultrafast 420 frames/sec (at 512 x 16 scan format) that is up to 50% faster image acquisition. Highly sensitive HyD detector allows a reduction of light dosage delivered to the cells, reducing photo-toxicity, and for detection of very low signals. The 3D rendering and imaging processing tools provide superb 3D reconstruction and high-quality images for analysis and publication….
The Instron 5965 is a universal testing equipment for performing tensile, compressive, shear, flexural, peel, tear and cyclic tests….
The Keyence VK-X1000K is a non-contact 3D laser profiler designed for high-precision surface measurement and analysis. It combines confocal microscopy and laser scanning technologies to provide high-resolution imaging and precise 3D surface measurements of various samples….
The DSX1000 Digital Microscope offers high-resolution imaging, flexible observation modes, and advanced measurement capabilities. It provides precise and efficient imaging for a wide range of applications. Only white light illumination is available….
The KBF-S 115 is a constant climate chamber with a large temperature and humidity range. It is typically used for shelf-life testing….
The JEM-1400Flash is equipped with a high-sensitivity sCMOS camera, “Matataki Flash”, JEOL’s innovative high-sensitivity sCMOS camera that dramatically reduces the readout noise while possessing high frame rate. This powerful feature enables high-throughput acquisition of sharp TEM images with extremely low-noise. The Limitless Panaroma (LLP) is a montage system capable of utilizing stage drive for the field shift. This new system allows for simple capture of a montage panorama image over a limitless wide area. Thus, an ultra-wide area, high pixel-resolution image is obtainable….
The Quanta 650 features a large sample chamber that enables imaging of samples of all sizes. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. Surface imaging with beam deceleration mode is possible to obtain surface and compositional information. Easy to use and intuitive controls make highly effective operation possible for novice users. The MAPS software does automatic acquisition of large overviews at any magnification, allowing high resolution imaging of large areas….
The JSM-6701F is suitable for observation of fine structures such as multi-layered film and nano particles fabricated by the nano technology. The high-resolution semi in-lens enables one to observe delicate specimens with minimum damage at very low accelerating voltages. At lower voltages, the fine surface structures can be observed more clearly than at higher voltages. It can be used to collect topographic information (SE and LEI mode) and observe elemental contrast (BSE mode) in the sample….
The SP8 DIVE (Deep In Vivo Explorer) is the first multiphoton microscope with spectrally tunable detection. This microscope provides spectral freedom, and offers unlimited flexibility and enables users to develop new multicolor deep in vivo experiments.The SP8 DIVE also provides maximum penetration depth and best contrast, and the new Vario Beam Expander can be tuned for improved penetration depth of more than 1 mm and maximum resolution….
This PET-CT equipment combines Positron Emission Tomography (PET) and Computed Tomography (CT) in one scanner. It provides detailed images by detecting metabolic activity (PET) and anatomical structures (CT), helping diagnose, stage, and monitor diseases like cancer….
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
THUNDER Imagers tackle biologically-relevant 3D models, providing high-speed, multicolour imaging for both thin and thick samples. They offer enhanced temporal resolution and real-time clarity of details, even deep within intact specimens, eliminating out-of-focus blur. …
An expert from Institute for Functional Intelligent Materials (I-FIM), Denis Baranov is the person to approach for queries involving in the area of Atomic force imaging, Scanning near field optical microscope, Fluorescent systems, and other commercial and specialized microscopy techniques…
An expert from Yong Loo Lin School of Medicine, Drug Discovery and Optimization Platform (DDOP), Winston Liao Wupeng is the person to approach for queries involving in the area of Drug discovery and development, Respiratory disease models, Multiplexing technology, Imaging…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Isabelle Bonne is the person to approach for queries involving in the area of Light microscopy, Confocal microscopy, Multiphoton microscopy, Electron microscopy…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Lucas Lu Thon Beng is the person to approach for queries involving in the area of Sample preparation for Electron microscopy, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, Volume Electron Microscopy (vEM)…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Delia Pang is the person to approach for queries involving in the area of 3D Imaging, 3D Visualisation, Brightfield, Fluorescence, Multiphoton, Scanning confocal, Slide scanning, Widefield…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Wu Yue is the person to approach for queries involving in the area of Light microscopy, Multiphoton, High density cell culture, Micromotors…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Kay En Low is the person to approach for queries involving in the area of Sample preparation for Electron microscopy, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, and Correlative Light Electron Microscopy (CLEM)…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Samaksh Singh (Sam) is the person to approach for queries involving in the area of Bioimage analysis, Segmentation, and Quantification for Electron Microscopy data…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Aik Yong Sim is the person to approach for queries involving in the area of Electron Microscopy sample preparation, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, and Volume Electron Microscopy (vEM)…
An expert from Faculty of Science, Centre for BioImaging Sciences (CBIS), Light Microscopy Core, Lin Yangchen is the person to approach for queries involving in the area of Confocal, Spinning disc with TIRF & FRAP, Lightsheet, Cryostat, Image process…
An expert from Institute for Health Innovation & Technology (iHealthtech), Archana is the person to approach for queries involving in the area of Digital microscopy, High-resolution imaging, Image capture, Real-time observation, Acrylic laser cutting, Vacuum heating, Vacuum drying, , Plasma treatment, Laser microscopy, Confocal microscopy, Digital microscopy, Parylene coating, Surface treatment, Semiconductor fabrication, Thin film deposition, Sample heating, PCB prototyping, Microfluidics patterning, Laser induced graphene, Microfabrication…
An expert from Faculty of Science, Protein and Proteomics Centre and SingMass, Lim Teck Kwang is the person to approach for queries involving in the area of Proteomics, Quantitative proteomics, Shotgun proteomics, Structural proteomics, Imaging systems, Microplate readers, SWATH, MRM, QTRAP, HDX exchange, Ion mobility, Sedimentation velocity, Sedimentation equilibrium…
An expert from Duke-NUS FACS Core Facility, Zeming Lim is the person to approach for queries involving in the area of Flow cytometry…
An expert from Cancer Science Institute, Microscopy & Multiplex Assays Core, Dedy Sandikin is the person to approach for queries involving in the area of Widefield, Fluorescence, Confocal, 3D imaging, Live cell imaging, High content imaging, Image analysis, 3D visualizations…
An expert from Mechanobiology Institute, Anne Beghin is the person to approach for queries involving in the area of Microscopy techniques, Advanced imaging methods, Sample preparation, Experimental planning…
An expert from Centre for Advanced 2D Materials (CA2DM), Ang Han Siong is the person to approach for queries involving in the area of Nano device fabrication and characterisation based on 2D materials…
An expert from Faculty of Science, Physics, Tan Jyh Harng is the person to approach for queries involving in the area of Scanning electron microscopy, Sample preparation, Atomic force microscopy, X-ray photoelectron spectroscopy…
An expert from Institute for Functional Intelligent Materials (I-FIM), Sourav Mitra is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…
An expert from Cancer Science Institute, Quantitative Proteomics Core, Wai Khang Yong is the person to approach for queries involving in the area of Quantitative proteomics with label-free quantification, SILAC-based quantitative proteomics, Proteome, Interactome, Proximity ligation, Clinical samples, Global post-translational modification (PTM) analysis, Cell surface proteomics…
An expert from Cancer Science Institute, Microscopy & Multiplex Assays Core, Peng Yanfen is the person to approach for queries involving in the area of Multiplex, IF satining, imaging and analysis…
An expert from Institute for Health Innovation & Technology (iHealthtech), Cheuk-Yan Au is the person to approach for queries involving in the area of Humidity control, Environmental testing, Stability testing, Moisture testing, Temperature and humidity testing, Controlled environments, Product testing, Soft polymer mechanical testing, 3D printing, Prototyping…
An expert from Yong Loo Lin School of Medicine, Confocal Microscopy Core, Lee Shu Ying is the person to approach for queries involving in the area of Microscopy…
An expert from Yong Loo Lin School of Medicine, Electron Microsopy Unit, Micky Leong is the person to approach for queries involving in the area of Electron microscopy…
An expert from Yong Loo Lin School of Medicine, Theranostics Center of Excellence, Zhao Tianzhi is the person to approach for queries involving in the area of Quantitative imaging…
An expert from Yong Loo Lin School of Medicine, Theranostics Center of Excellence, Zhao Mengyao is the person to approach for queries involving in the area of Quantitative imaging…
An expert from Faculty of Science, CBIS LM Core, Tong Yan is the person to approach for queries involving in the area of Confocal, Spinning disc with TIRF & FRAP, Lightsheet, Cryostat, Image process…
An expert from Faculty of Science, Centre for BioImaging Sciences (CBIS), CryoEM Facility, Shi Jian is the person to approach for queries involving in the area of CryoEm sample preparation, SEM and FIB, TEM, Cryo-TEM, CryoEM, TEM-Material science, SPA, Tomography, MicroED, HR-TEM, STEM, 4D-STEM…
An expert from Comparative Medicine, Rex Manguiat is the person to approach for queries involving in the area of Fluorescence and bioluminescence imaging, MicroCT imaging, Cardiac and ultrasound imaging…
An expert from Comparative Medicine, Elaine Manigbas is the person to approach for queries involving in the area of MRI techniques, particularly in Neuroimaging, Musculoskeletal imaging, Cardiology, Angiography, Diffusion tensor imaging, Oncology, Diagnostic scans and Development of new contrast agents…
An expert from Comparative Medicine, Raymond Serrano is the person to approach for queries involving in the area of CT imaging techniques, Contrast-enhanced cardiac scans, Angiography, Bone mineral density measurements, Robotic system testing, Fluoroscopy, 3D scanning for prototyping, Irradiation needs…
An expert from Comparative Medicine, Ilonka Guenther is the person to approach for queries involving in the area of PET-CT scans, Biodistribution studies, Disease monitoring, Dosimetry studies of new PET tracer, Consultation on study design, C-Arm use for Intraoperative fluoroscopy scans and X-ray scans…
An expert from Institute for Functional Intelligent Materials (I-FIM), Chen Musen is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…
An expert from Cancer Science Institute, Quantitative Proteomics Core, Dennis Kappei is the person to approach for queries involving in the area of Quantitative proteomics with label-free quantification, SILAC-based quantitative proteomics, Proteome, Interactome, Proximity ligation, Clinical samples, Global post-translational modification (PTM) analysis, Cell surface proteomics…
An expert from College of Design and Engineering, Materials Science and Engineering, Electron Microscopy Facility, Yang Fengzhen is the person to approach for queries involving in the area of Transmission electron microscopy (TEM)…
An expert from College of Design and Engineering, Materials Science and Engineering, Shen Jingjing is the person to approach for queries involving in the area of Scanning Electron Microscopy (SEM)…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Ashley Xu is the person to approach for queries involving in the area of Helium ion microscopy, Material science, Optical spectroscopy, Nanofabrication, Electron microscopy, 2D materials, 2D material characterization…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Li Haobo is the person to approach for queries involving in the area of Materials Science, Thin film and 2D materials deposition and characterization, Photolithography…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Electron Microscopy Laboratory, Cheng Liyan is the person to approach for queries involving in the area of XPS, SEM, TEM…
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Mya Mya Khin is the person to approach for queries involving in the area of Raman microscope, Material tensile, Material shear, Material compression…
An expert from Life Science Institute, NUS-Cambridge Cell Phenotyping Centre, Karishma Sachaphibulkij is the person to approach for queries involving in the area of Flow cytometry assays…
An expert from Life Science Institute, Advance Imaging Lab, Syaza Hazwany is the person to approach for queries involving in the area of Histology, microscopy…
An expert from Mechanobiology Institute, Liu Jun is the person to approach for queries involving in the area of Microscopy techniques, Advanced imaging methods, Experimental planning…
An expert from Mechanobiology Institute, Melvino Sin is the person to approach for queries involving in the area of Microscopy techniques, Sample preparation, Image processing…
An expert from Mechanobiology Institute, Jasmine Chin is the person to approach for queries involving in the area of Microscopy techniques, experimental planning…
An expert from Mechanobiology Institute, Paramasivam Kathirvel is the person to approach for queries involving in the area of Fluorescence-activated cell sorting, Cellular energy metabolism studies, Phenotyping screening…
An expert from College of Design and Engineering, E6 NanoFab, Loh Fong Leong is the person to approach for queries involving in the area of General tool management…
An expert from College of Design and Engineering, E6 NanoFab, Linn Linn is the person to approach for queries involving in the area of Semiconductor device cross section analyses, Advanced coating thickness and structure uniformity determination, Small contamination feature geometry and elemental composition measurement…
An expert from Singapore Synchrotron Light Source, Yang Ping is the person to approach for queries involving in the area of Crystallography, Materials science…
An expert from Singapore Synchrotron Light Source, Agnieszka Banas is the person to approach for queries involving in the area of Fourier Transform Infrared spectroscopy and microscopy (FTIR), O-PTIR non-contact submicron visible probe infrared spectroscopy, Nanoscale infrared spectroscopy and imaging, Synchrotron Induced X-ray Emission (SRIXE), Proton Induced X-ray Emission (PIXE), X-ray absorption fine structure (XAFS), Statistical multivariate methods for spectral data evaluation, dimension reduction…
An expert from Singapore Synchrotron Light Source, Yu Xiaojiang is the person to approach for queries involving in the area of Surface science, Condensed matter physics…
An expert from Singapore Synchrotron Light Source, Diao Caozheng is the person to approach for queries involving in the area of Surface science, Condensed matter physics…
An expert from Solar Energy Research Institute of Singapore, PV Devices Characterisation Group, Choi Kwan Bum is the person to approach for queries involving in the area of Photovoltaic cell characterisation…
An expert from Solar Energy Research Institute of Singapore, PV Module Characterisation and Reliability, Leow Shin Woei is the person to approach for queries involving in the area of PV module fabrication, PV module characterization and testing…
An expert from NUS Environmental Research Institute, Mass Spectrometry Lab, Per Poh Geok is the person to approach for queries involving in the area of Chromatography data acquisition and analysis, Method development using chromatography techniques…
An expert from NUS Environmental Research Institute, Mass Spectrometry Lab, Siah Ke Yee is the person to approach for queries involving in the area of Chromatography data acquisition and analysis, Method development using chromatography techniques…
An expert from Life Science Institute, SynCTI, Teo Wei Zhe is the person to approach for queries involving in the area of Mass spectrometry and Liquid Handling…
An expert from College of Design and Engineering, Electron Microscopy Facility, Tan Shengdong is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Electron Microscopy Facility, Yao Bingqing is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Electron Microscopy Facility, Zhou Xin is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Chung Jing Yang is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…