Benchtop semi-auto wire bonder …
IFIM
Atomic Force Microscope (In Glovebox)
A versatile AFM that can capture images of air-sensitive materials that are inherently distortion-free and reproducible. Equipped with easy tip exchange combined with SmartScan software’s one-click imaging and pre-programmed advanced modes. …
Muffle Furnace 2
The muffle furnace is designed for high-temperature heating and thermal processing in a controlled environment. It has a sealed chamber that isolates the heating elements from the material being processed, minimizing contamination and ensuring uniform temperature distribution. …
Drop Shape Analyzer 30M
DSA30 was specially designed to investigate the contact angle on surfaces which require very small drops for analyze. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES)
This device currently only accept aqueous sample. Sample digestion service is not available. The sample concentration is suggested to be diluted to ppb or ppm level and to be filtered before test if there are particles….
Malvern Panalytical Zetasizer
This device is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. The measurable range for particle size test: 0.3 nm to 10 μm….
Flash Chromatography
This is a high-performance, versatile flash purification system designed for broad requirements in drug discovery and research laboratories….
Fluorescence Spectrophotometer
This system includes both steady-state and time-resolved dual capabilities. …
Fourier-transform Infrared Spectroscopy (FTIR)
Attenuated Total Reflectance (QATR 10, diamond crystal) for direct measurement of liquid, film, and powder samples….
High-Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS)
LC–MS is an analytical chemistry technique that combines the physical separation capabilities of liquid chromatography (or HPLC) with the mass analysis capabilities of mass spectrometry (MS)…
Shimadzu UV-Vis-NIR Spectrophotometer
It has measurement capability in the UV, visible and up to 3,300 nm in the near-IR region allows for characterizing samples (including solids, powders, wafers, films and liquids). It has a cuvette holder and solid sample holder….
Mettler Toledo UV-Vis-NIR Spectrophotometer
The system is equipped with a cuvette platform, and micro-volume platform for fast measurement (seconds) of µL liquid or films….
Drop Shape Analyzer 25E
DSA25 is an easy-to-use, reliable instrument for measuring contact angle. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
Scanning Electrochemical Systems
A multifunctional compact scanning system equipped with a Scanning Electrochemical Microscopy (SECM), a Scanning Vibrating System (SVET), a LEIS (Localised Electrochemical Impedance Spectroscope) and a Scanning Kelvin Probe (SKP)….
Muffle Furnace
The furnance is to perform chemical reactions, annealing of materials, devices in ambient conditions….
Dynamic Mechanical Analyzer – Science Blk 9
The equipment is capable of measuring the mechanical properties of samples (in air as well in liquid media) under controlled environmental conditions of temperature, pH and relative humidity (RH)….
Anton Paar Zetasizer
The system allows measurement of the zeta potential down to a few millivolt at the solid/liquid interface by means of streaming potential and streaming current measurement. …
Potentiostat
The system has multichannel capabilities to run multiple experiments simultaneously. Every individual channel is independent….
Denis Baranov
An expert from Institute for Functional Intelligent Materials (I-FIM), Denis Baranov is the person to approach for queries involving in the area of Atomic force imaging, Scanning near field optical microscope, Fluorescent systems, and other commercial and specialized microscopy techniques…
Kristina Vaklinova
An expert from Institute for Functional Intelligent Materials (I-FIM), Kristina Vaklinova is the person to approach for queries involving in the area of Nanoscale heterostructures, Microscale heterostructures, Device fabrication…
Sourav Mitra
An expert from Institute for Functional Intelligent Materials (I-FIM), Sourav Mitra is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…
Tummala Pinaka Pani
An expert from Institute for Functional Intelligent Materials (I-FIM), Tummala Pinaka Pani is the person to approach for queries involving in the area of Large-area growth of MoS2 nanosheets, Fabrication of two-dimensional transition metal dichalcogenides (TMDs), Chemical vapor deposition (CVD), Furnace management and operation…
Chen Musen
An expert from Institute for Functional Intelligent Materials (I-FIM), Chen Musen is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…