CryoTEM Krios G4 is the latest and most advanced CryoTEM commissioned and opened in 2025. It’s equipped with cold-FEG, Panther STEM detector, EMPAD, CetaD camera and Selectris Energy filter with Falcon4i electron direct detector….
CryoTEM Krios G4 is the latest and most advanced CryoTEM commissioned and opened in 2025. It’s equipped with cold-FEG, Panther STEM detector, EMPAD, CetaD camera and Selectris Energy filter with Falcon4i electron direct detector….
The flexiVent lung function solution is the gold standard for in-vivo respiratory mechanics measurements. It goes beyond traditional resistance and compliance mechanics of pulmonary ventilation and captures details about the mechanical properties of conducting airways, terminal airways and parenchyma. The flexiVent achieves the highest sensitivity and reproducibility by precisely controlling experimental conditions….
The APT device enables near-atomic level resolution (~0.2 nm depth & ~0.4 nm lateral) and 3D compositional mapping with high chemical sensitivity (<5 appm) by field evaporation and time-of-flight mass spectrometry. ...
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
This is a high-end Cryo electron microscopy with electron direct detector….
The Versa 3D DualBeam FEG FIB-SEM combines a focused Ga ion beam with a high-resolution field-emission electron gun. Owing to a large chamber allowing up to 6″ industry wafers with full rotation, the Versa 3D provides enhanced 2D and 3D materials characterization and analysis for a wide range of material science and industry-related samples….
For department/faculty use only.
This device is used for untargeted compound (metabolomics) analysis and compound characterization. …
The Electron Microscopy Unit (EMU) at the Yong Loo Lin School of Medicine, NUS, is a core facility within the Microscopy Cluster that provides advanced transmission and scanning electron microscopy, along with essential sample preparation tools such as ultramicrotomes. …
The Leica EM CPD300 critical point dryer is an important equipment for SEM sample preparation. It dries biological specimens such as pollen, tissue, plants, insects, as well as industrial samples, like Micro Electro Mechanical Systems (MEMS) or Micro fluids and gels in a fully automated and controlled process. It preserves the surface structure of a specimen which could otherwise be damaged due to surface tension when changing from the liquid to gaseous state….
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
The Leica EM ACE200 is a fully automated, high quality desktop coater designed to produce homogenous coatings of conductive metal or carbon required for SEM imaging. It can be used as a sputter coater or carbon thread evaporation coater with interchangeable heads in one instrument. Glow discharge function is also available for the preparation of TEM grids….
The Leica ultramicrotomes produce high-quality ultra- or semi-thin sections for TEM or LM imaging, as well as perfectly smooth surfaces required for LM, TEM, SEM, and AFM examination. They are equipped with a camera system and a monitor for effective training and demo. The touchscreen control unit of the Leica UC7 ultramicrotome has the ability to control all necessary components for sectioning including independently brightness-controlled LED light sources. It is also equipped with the FC7 low-temperature sectioning system….
The JSM-IT710 HR SEM is a high resolution SEM with the simple SEM function and Zeromag mode, that provides the versatility to handle a wide variety of samples and workflow designed for fast results. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. The SEM is also equipped with Oxford AZtecLiveLite EDS software and Xplore 65 detector for elemental analysis. The SEM has capabilities to perform automatic acquisition for volume EM with the Array Tomography software or Serial Block Face software, with the ConnectomX Katana microtome attached. …
High throughput quantitative proteomics or transcriptomic by multiplexing…
The VSM is used for measuring magnetic properties such as DC characterisation….
The fully integrated MBE system allows deposition of hetero-structures and semiconductors. IV and II-VI group deposition chambers are integrated with transfer chamber and load lock. The system has 5 ports for each chamber….
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
This equipment uses SQUID-based magnetometry / susceptibility to provide a stable magnetic field for material characterisation….
This equipment is used for visualisation of magnetic domains and magnetization processes as well as for optically recording magnetization curves qualitatively on all kinds of magnetic materials, including bulk specimens like sheets or ribbons, magnetic films and multilayers, patterned films or micro- and nanowires….
The CMP system is used for metal and dielectric planarization such as Cu Al, SiO2, SiN. It is able to accommodate polishing for coupon size up to 2 cm as well as wafer size up to 8 inches, with a finishing surface roughness of 1 nm….
The FIBSEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
The Raman microscope acquires detailed chemical images and highly specific Raman data from discrete points. It analyses both large volumes and traces of material….
This is a fast, high-resolution, automated wafer and multi-sample exposures electron beam lithography tool….
Furnace system for wet and dry oxidation in the temperature range of 200 to 1000 degree Celsius…
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
The JEM-2800 is an advanced workhorse 200 kV transmission electron microscope with a Schottky-type field emission electron source. This multi-purpose S/TEM employs an user-friendly, high-stability operating system for high-resolution imaging in TEM (including diffraction modes) and STEM (imaging and EDS). Equipped with a TMP vacuum system, the JEM-2800 is particularly suited for fast screening of multiple samples….
The scanning electron microscope utilizes a focused beam of electrons to scan the surface of a sample. As the electron beam interacts with the specimen, it generates signals such as secondary electrons, backscattered electrons, and characteristic X-rays. These signals are detected and processed to create an image, revealing the topography, composition, and other features of the sample at high magnifications….
The 3-chamber-modules advanced dry etching cluster system is used for micro- and nanomachining of various materials, with 8” wafer size, 300 mm diameter alumina discharge chamber, up to 8 mass flow controlled gas lines for each module and a minimum base pressure of 1×10-6 torr….
This system uses close proximity physical vapour deposition with magnetron technology. The target-to-substrate distance is adjustable between 50-100 mm. The system accepts 3” diameter target size, various sample sizes and a maximum of 8” wafer….
The SCIA Coat 200 is designed for homogeneous coating of high precision optics such as X-ray mirrors and optical filters with the technology of Dual Ion Beam Deposition (DIBD). The system is also equipped with a RF350-e ion beam source for etching process….
Heidelberg DWL 66+ laserwriter is a high resolution pattern generator for direct writing and mask making….
This system applies an external magnetic field during the annealing process, which serves as an effective process to enhance the performance of magnetic devices and materials….
The Mask Aligner 8 system is a precision photolithography tool used in the fabrication of microelectronic devices. It aligns a photomask with a substrate, typically a silicon wafer, and then exposes the substrate to ultraviolet (UV) light. This process transfers the mask’s pattern onto a light-sensitive photoresist layer on the substrate….
This system is used for the atomic layer deposition (ALD) of metal nitrides, oxides and sulphides with thermal and plasma processes….
The JEM-ARM200F is a 200 kV cold field-emission, probe-corrected transmission electron microscope with a STEM resolution of 0.078 nm and TEM resolution of 0.1 nm. It also has an energy-dispersive X-ray detector and dual energy loss spectrometers that can form elemental maps at atomic resolution, and a fast CMOS camera. With its probe aberration corrector and ultra-high-resolution pole piece it is particularly suited to STEM imaging and analysis….
The Fischione 1051 TEM Mill allows for the preparation of TEM lamella samples through dual argon ion beams. Equipped with a touchscreen interface and camera, it can be operated through digital inputs as well as remotely….
The Leica EM RES102 has two saddlefield ion sources with variable ion energies, with the capability of mounting a variety of samples for argon ion milling, including SEM and TEM samples….
The Ion Slicer can prepare thin-film specimens without solvents or chemicals and requires no prior treatment of the specimen other than rectangular slicing (no disc grinding or dimple grinding)…
The FEI Helios 450S FIB is a dual beam Ga+ ion & electron microscope with high-resolution topographical imaging and patterning capabilities. The electron beam is primarily used for surface characterization, while the ion beam is used for top-down fabrication tasks such as TEM lamella preparation, cross-section failure analysis, and nanoscale surface modification. The stability of the low voltage ion beam and chamber cleaning attachments reduces contamination and amorphization vital for S/TEM analysis….
The Orion NanoFab Helium Ion Microscope (HIM) operates using ionized Helium or Neon gases rather than electrons for imaging and milling of materials. With the significantly smaller interaction volume, alongside the smaller de Broglie wavelength, the HIM can achieve finer spatial resolution and larger depth-of-field compared to a FE-SEM. Nanomachining fabrication with sub-10 nm feature sizes is achievable through lighter He ions, while faster milling is operated through heavier Ne ions….
This UHV deposition system is capable of producing good quality thin films of metals, alloys and their multilayers Able to handle 8” wafers size. Targets E-beam: Ti, Cr, Al Thermal: Au, Cu…
The Raman microscope offers advanced confocal imaging capabilities in 2D and 3D. The true confocal Raman microscope enables the most detailed images and analyses to be obtained with speed and confidence. With guaranteed high performance and intuitive simplicity, the LabRAM HR Evolution is the ultimate instrument for Raman spectroscopy. They are widely used for standard Raman analysis, PhotoLuminescence (PL), Tip Enhanced Raman Spectroscopy (TERS) and other hybrid methods….
Fully automated 400MHz NMR spectrometer for routine 1H and multi nuclear acquisition…
The JEOL JES-X320 ESR spectrometer in our lab allows measurements of samples using microwave in the X-band region. It is also equipped with a variable temperature controller (sample temperature range from -150°C to 200°C) and an ultraviolet irradiation apparatus (for photoexcitation of sample)….
This equipment is able to investigate the surface chemistry of materials by measuring the elemental composition, chemical state, and electronic state of the elements within the top few nanometers of the surface….
This equipment is able to analyze the surface morphology and composition of a wide range of samples, including metals, biological specimens, and nanomaterials at the micro and nanometer scale….
Imaging of a specimen’s internal structure and composition at the atomic scale, allowing detailed visualization of cellular structures, materials, and nanostructures. can achieve resolution at the sub-nanometer scale, with less than 10 nanometers (nm)….
Bruker D8 Venture is a Single Crystal X-ray Diffractometer equipped with dual source, four-circle kappa goniometer. It is used for single crystal structure analysis….
Bruker D8 Advance is a Powder X-ray Diffractometer equipped with CuKα source, Goebel Mirror, an XYZ Stage with motorized z-adjustable and LYNXEYE XE-T detector for thin film sample measurements at room temperature….
D8 ADVANCE provides a range of hardware and software solutions for X-ray diffraction and scattering applications, including phase identification, quantitative phase analysis, micro-structure and crystal structure analysis….
The DSC instrument allows user to measure the heat flow into (or out of) a sample when it is heated or cooled, and use the data to determine its melting point, Tg, etc….
The TGA instrument allows the user to measure the mass change in a sample when it is heated at a constant rate, at a constant temperature, or both….
The STA instrument combines function of the TGA and the DSC. It allows user to measure at the same time both the heat flow and the mass change of a sample when it is heated….
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum….
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum. The integrating sphere expands its capability allowing measurement of reflectance spectrum (diffuse or specular)….
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
The fluorescence spectrometer allows user to shine light from UV-Vis range at a sample and collect its fluorescence spectrum….
500MHz NMR spectrometer with iProbe for 1H and multinuclear acquisition…
500MHz NMR spectrometer with inverse probe for 1H and multidimensional experiment…
400MHz solid state NMR spectrometer 4mm CPMAS probe for multi nuclear acquisition…
Simultaneous DSC-TGA – MS provides simultaneous measurement of heat flow (DSC) and weight change (TGA) from ambient to 1500°C along with evolved gas analyses via the bench top Pfieffer MS up to 300 amu….
This device allows acid digestion of samples under high temperature 240°C and pressure up to 199 bar….
This device quantifies the amount of elements present in the samples down to sub ppm levels….
This equipment enables quantitative analyses of anions such as F, Cl, Br, NO3, PO4, SO4 in aqueous samples….
The Park NX10 AFM features a True Non-Contact™ scan Mode that produces high resolution and accurate data by preventing destructive tip-sample interaction during a scan. Its compact and rigid ‘Step-and-Scan’ enables programmable multiple region imaging….
Split tube furnaces can be used for a wide range of applications where precise temperature control and the ability to easily insert and remove samples are important. Compact design for minimum space requirement….
Split tube furnaces can be used for a wide range of applications where precise temperature control and the ability to easily insert and remove samples are important. Compact design for minimum space requirement….
Graphene CVD is a process used to produce high-quality graphene sheets. This technique involves depositing carbon atoms onto a substrate, typically copper, at high temperatures. A carbon-containing gas, such as methane, is introduced into a reaction chamber where it decomposes on the hot substrate, allowing the carbon atoms to arrange themselves into a single layer of graphene. This method is preferred for its ability to produce large-area graphene with excellent electronic properties, making it suitable for applications in electronics, sensors, and other advanced technologies….
Heidelberg laser writer is a high resolution pattern generator for direct writing and mask making….
The Mask Aligner MJB4 system is a precision photolithography tool used in the fabrication of microelectronic devices. It aligns a photomask with a substrate, typically a silicon wafer, and then exposes the substrate to ultraviolet (UV) light. This process transfers the mask’s pattern onto a light-sensitive photoresist layer on the substrate….
Stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
Fully programmable and user-friendly, the Cee® 200X features the accuracy and repeatability needed to eliminate processing variability from photoresist and thin film deposition processes….
An ICP etch system that utilizes plasma generated by inductively coupled sources to precisely etch materials on substrates through ion bombardment, ensuring high precision and control….
This system enables the cleaning of surfaces, such as before bonding, soldering or gluing, as well as the activation of surfaces before printing, varnishing or gluing. Gases available are Ar, O2 and N2….
The D8 ADVANCE is an adaptable diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The D8 ENDEAVOR is a fast automated diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The D2 PHASER is a benchtop diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The Zetasizer Nano ZS is a high-performance two-angle particle and zeta potential analyzer for the enhanced detection of aggregates and small particles….
The Renishaw Raman Microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
The Renishaw Raman microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
Dynamic Mechanical Analyzer (DMA) is equipped with interchangeable clamps such as single cantilever, dual cantilever, 3-point bending, dual film tension, shear and compression. Operation temperature range is from -150°C to 400°C….
Gas chromatography–mass spectrometry, GC-MS, is used to identify the molecular weight, elemental constitution, and molecular structure of the compounds present in the sample….
Quadrupole ion trap MS coupled to an Agilent HPLC with infusion pump for Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
A high-vacuum gas sorption analyzer equipped with both physisorption and chemisorption capabilities for characterization of porous materials. Electrospray Ionisation – Mass spectrometry…
Linear quadrupole ion trap MS coupled to a Dionex HPLC with infusion pump for Brunauer–Emmett–Teller (BET), Micropore Analysis, Mesopore Analysis…
Liquid Chromatography Mass Spectrometry (LC-MS). For protein sequencing, protein analysis and polymer analysis….
It can perform high vacuum physisorption analyses of surface area and micropores. For Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
This equipment measures the weight change and the rate of weight changes as a function of temperature, time and atmosphere….
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
This equipment measures fluorescence emission spectra for liquid/solid samples….
The device is a high-performance liquid chromatography (HPLC) systems designed for analytical and preparative chromatography applications….
The device offers flexibility for solvent selection and automation in HPLC method development….
This device is a high-performance detector designed for use in liquid chromatography (LC) applications. It features a wide range of wavelength coverage, high sensitivity, and fast response time, making it ideal for the detection of a wide variety of compounds….
The most sensitive GC/MS on the market, Shimadzu’s GCMS-QP2010 Plus delivers better performance and reliability with unsurpassed hardware capabilities and powerful, flexible software. Utilizing many of the high-end features of the GCMS-QP2010 Plus, the GCMS-QP2010S offers high throughput and excellent productivity, providing users with an excellent performance-to-cost ratio. …
The Agilent 6890N is a state-of-the-art gas chromatograph that provides superior performance for all applications. Key to its performance is the use of advanced electronic pneumatic control (EPC) modules and high performance temperature control. Each EPC unit is optimized for its intended use with a specific inlet and detector option….
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
This system enables chemiluminescent western blot imaging, DNA gel imaging, fluorescent western blot imaging and protein gel imaging….
GloMax® Discover is a microplate reader with luminescence, fluorescence, BRET/FRET and UV-Visible absorbance detection capabilities….
The TripleTOF 5600+ System combines the best-in-class front end of SCIEX Triple Quad technology with the Accelerator TOF Analyzer, to deliver nominal mass and accurate mass benefits in a single platform. This proven workhorse uniquely integrates comprehensive, qualitative exploration, rapid profiling, and high-resolution quantitation workflows, providing high performance and versatility for pharmaceutical development, omics research and any challenging unknown compound analysis….
The TripleTOF 6600+ System offers sensitive and robust quantitation using dedicated low flow source technology. Redesigned TOF entrance optics, along with software improvements within the forthcoming Analyst® TF Software 1.8, deliver optimized ion beam control, detector tuning, and scheduled ionization….
The QTRAP 6500+ system provides exceptional LOQs over a broad scope of chemical compounds in challenging matrices. QTRAP functionality turned on from the get-go. Instantly access qualitative QTRAP scans for identification, characterization and quantification of your samples. Combine sensitive MRM analysis with qualitative insights instantly.…
The Waters Synapt G2-Si ESI MS is a high resolution electrospray mass spectrometer that is also capable of performing LCMS. Using Water’s Stepwave technology to reduce background noise and eliminate neutrals, a higher signal to noise ratio is reached than traditional Q-TOF instruments. The Synapt will also be capable of performing MS/MS experiments in order to elucidate molecular structures of small molecules….
Beckman Coulter ProteomeLab XL-I analytical ultracentrifuge is equipped with absorbance (wavelength range 190 – 800 nm) and interference optics and can be used for both sedimentation velocity and sedimentation equilibrium experiments. Analytical ultracentrifugation is applicable for proteins, nucleic acids, lipids, polysaccharides, viruses and nanoparticles. It has a broad applicability including determination of sample homogeneity, oligomeric state of proteins (or molecular weight, respectively) and can be used to assess aggregation of sample and to study biomolecular interactions of self- and hetero-association systems (determination of stoichiometry and affinity)….
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
The Cytek Northern Lights™ flow cytometer, with its easy-to-use workflow, is a flexible and affordable full spectrum flow cytometry solution for everyday research applications. The Northern Lights instrument incorporates Cytek’s powerful Full Spectrum Profiling™ (FSP™) technology in a one to three laser system, allowing for a wide array of new fluorochrome combinations without reconfiguring your system for each application. Whether you are doing basic assays such as cell proliferation, apoptosis analysis, or other cell health applications, or multicolor immunophenotyping panels, the Northern Lights system meets all of your flow cytometry needs….
Type A2 BSC with NSF49 enhanced and certified annually…
Near-infrared II in vivo imaging…
The nanoScan® SPECT system images radiotracers with absolute quantification, high sensitivity and high spatial resolution down to 0.3 mm in vivo. In addition, a wide range of patented multi-pinhole collimators is available with optimized performance for any applications: from whole-body to focused scanning; imaging of mice, multiple mice, large rats and rabbits; from low energy tracers to theranostic isotopes….
AniView Pro series is an upgrade of the previous generation of AniView products, adopting a new appearance and more professional structural design. At the same time, the application function has also been enhanced to match more filters, and a new spectral separation function has been added to allow the separation of multiple fluorescent probes, so as to reduce the interference of fluorescent background on experimental results, making it an excellent partner for scientific research experiments….
The ZONETEM II utilizes vacuum-controlled UV irradiation to gently eliminate hydrocarbon contamination for electron microscopy imaging….
The Gatan Solarus II is a plasma cleaning system for removing organic surface contaminants through user-defined gas-flow plasma….
This station is used to store TEM holders….
The Olympus DSX1000 is an upright fully digital microscope with automated xyz and focusing functions. The tilting head allows sample imaging from multiple angles and lens can be selected for a variety of field-of-views….
The ECLIPSE Ti2 is an inverted microscope delivering 25 mm field of view with stable, drift-free platform for high-speed imaging applications….
The Leica EM TXP is a target preparation device for milling, sawing, grinding, and polishing samples prior to examination by SEM, TEM, and LM techniques….
The Leica Ultracut UCT ultramicrotome is an instrument commonly used to prepare TEM samples. It uses either a glass or diamond knife to cut ultra thin sections of specimens embedded in epoxy. The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width and can be stained and mounted onto TEM grids for viewing….
For department/faculty use only.
The BD Fortessa is a cell analyser that combines powerful fluidic systems and novel optic designs, that combine to allow for maximised signal detection and enable minimal cross-overlapping. The 5 laser setup accommodates the detection of up to 18 colours simultaneously , providing the support for researchers for their multi-colour experiments….
For department/faculty use only.
The BD FACSAria II Cell Sorter is a high-speed, high-precision flow cytometer designed for advanced cell sorting applications. It features state-of-the-art optics and fluidics systems, allowing for simultaneous sorting of up to four populations with high purity and yield. Our system offers customizable configurations with five lasers and multiple fluorescence detectors, supporting complex multi-color experiments….
For department/faculty use only.
This manual digestor is ideally suited for determining the nitrogen and protein amount in solid and pasty substances. …
For department/faculty use only.
The manual distillation system of the brand Gerhardt type Vapodest 20 is ideal for nitrogen analysis and protein analysis according to the Kjeldahl method….
For department/faculty use only.
Fully automated system that could extract up to 24 different samples in less than 2 hours…
For department/faculty use only.
The FatExtractor E-500 is designed for quick and compliant fat extraction….
For department/faculty use only.
Acid hydrolysis system for treatment of samples before fat extraction…
For department/faculty use only.
This device is equipped with 1260 Infinity II PRIME LC system with column heater, autosampler, multicolumn thermostat, 1260 Infinity II Refractive index detector and 1260 Infinity ELSD…
For department/faculty use only.
HPLC system with UV and fluorescence detector…
For department/faculty use only.
The Waters HPLC System integrates solvent and sample management with consistent system-to-system performance and high reproducibility. The Waters chromatography system ensures the reliability of results through high injection precision for precise quantification and exceptional retention time repeatability for accurate peak identification. The Waters 2996 Photodiode Array (PDA) Detector operates in any standard laboratory environment. The detector requires electrical power, sample and waste fluidic lines. Optional connections on the detector rear panel allow communication with chart recorders and data integrators.
…
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
For department/faculty use only.
Capable to determine the unknown compounds based on their molecular mass…
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
For department/faculty use only.
Fully automated digestor. It can be used on food, feed, wastewater and a wide range of industrial compund….
For department/faculty use only.
Fully automated distillation, colorimetric titration and calculation….
The Protochips Atmosphere allows the in-Operando study of materials under realistic environmental conditions. Based on a TEM holder closed-cell design, Atmosphere is a fully automated system that includes a computer controlled gas manifold and a feature-rich software interface….
For department/faculty use only.
This device helps to identify the potential molecular weight of big molecules….
For department/faculty use only.
This device is suitable for natural product isolation and purification with large injection volumes and big-size columns….
For department/faculty use only.
This device is used for targeted compound analysis, characterization and quantification (if standards are provided)…
The device has excellent versatility and high performance for measurements of parts and electrical components, with sub-micron precision….
The Lightning in-situ TEM biasing & heating holder provides real-time information under a controllable electrical and thermal environment in the microscope….
The Elsa cryo-transfer holder is a single-tilt liquid nitrogen holder designed for the frost-free transfer of a sample at liquid nitrogen temperature….
The Mel Build Defend Atmos Defend holder incorporates a specially designed vacuum transfer system and a mechanical drift cancellation controller. The holder can be tilted along two axes and cooled down to -160°C….
For department/faculty use only.
For the freeze drying of non-food grade samples…
For department/faculty use only.
For ashing of most type of organic and inorganic samples…
For department/faculty use only.
A rheometer is a precision instrument that contains the material of interest in a geometric configuration, controls the environment around it, and applies and measures wide ranges of stress, strain, and strain rate….
The system uses Dynamic Light Scattering (DLS) for particle sizing and distribution. For zeta potential two modes, Doppler velocimetry (electrophoretic light scattering or ELS) and Phase Analysis Light Scattering (PALS) are available. Suitable for measuring colloids, nanoparticles, proteins and peptides….
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
For department/faculty use only.
Capable of determining the molecular mass of unknown and quantifying the amount of hydrocarbons present in the sample. Able to determine by liquid, SPME, Arrow and headspace injection…
For department/faculty use only.
This device is able to concentrate samples for small-volume samples, and is suitable for temperature-sensitive samples (< 10°C)....
For department/faculty use only.
A bench-top measurement instrument designed to evaluate the color and appearance of opaque, transparent, and translucent samples….
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
For department/faculty use only.
Monochromator spectrophotometer for reading of absorbance…
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings offers modes for absorbance, kinetic analysis, and fluorescence, as well as microscopy options for high-contrast brightfield, brightfield, phase contrast, and widefield fluorescence….
For department/faculty use only.
Easy to use, powerful, compact and robust – Spectrum Two™ is the Fourier Transform Infrared (FTIR) spectrometer of choice for everyone, everywhere. With fully integrated, robust universal sampling for trouble-free measurements and portability options, Spectrum Two is ideal for use in both laboratory and remote testing environments….
For department/faculty use only.
For the freeze drying of food grade samples only…
For department/faculty use only.
GC-Flame ionisation detector for analysis of volatile compounds….
For department/faculty use only.
Three-Stage Programmable Furnaces feature PID control with ten programs (programs 1 to 9 are general three-stage programs; program 0 is a continuous hold at a set temperature). Program link feature lets you run two three-stage programs sequentially. Use the seven-day delay to program the completion date and time. Ramp rate is adjustable.
…
For department/faculty use only.
The SCIEX Triple Quad™ 3500 LCMS/MS system combines modern hardware, powerful software, and robust engineering to enable lower levels of detection and quantitation than conventional GC and LC workflows, and across a wider range of analytes….
For department/faculty use only.
This is a Triple Quad LCMS system that delivers reliable quantitative and qualitative results for all but the most demanding analyses. …
For department/faculty use only.
This is a Single Quad GC-MS equipped with an Agilent 7890A gas chromatograph and an Agilent 5975C mass spectrometer. …
For department/faculty use only.
The Shimadzu Prominence High-Performance Liquid Chromatograph offers exceptional reliability and great expandability to support diverse applications from UPLC to preparative LC, gel permeation chromatography (GPC), ion chromatography (IC), and LC/MS….
For department/faculty use only.
The Zetasizer Ultra is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. …
For department/faculty use only.
The CytoFLEX Flow Cytometer provides the performance of an easy-to-use system, allowing you to focus on the science, not the instrumentation. Its superior sensitivity and resolution throughout all configurations give it the edge over other cytometry systems four times its size….
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
For department/faculty use only.
ICPE-9820 is suitable for the detection and quantification of multiple elements and metal simultaneously down to ppm or ppb levels in a broad range of sample fields, such as environmental testing, pharmaceuticals, foods, chemicals, and metals….
For department/faculty use only.
The VSA measure gravimetrical change of sample subjected to varying conditions of humidity and temperature. The VSA generates both Dynamic Dew Point Isotherm (DDI) and Dynamic Vapor Sorption (DVS) characteristic curves….
For department/faculty use only.
Mobile Minor can spray dry food grade solutions, suspensions or emulsions into powder samples. …
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
For department/faculty use only.
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time. DSC can be used to study material’s melting, glass transition melting, crystallization, chemical reactions, polymorphic transitions, vaporization and many other processes. Specific heat capacities and changes in heat capacity, can also be determined from the difference in heat flow….
For department/faculty use only.
Brabender TwinLab with 20 mm screws together with cooling die and gravimatric feeder, is suitable for high moisture extrusion. The system also provides comprehensive diagrams with recorded measurement parameters, i.e temperature, pressure, weight for easy monitoring and design of process parameters….
For department/faculty use only.
The Acquity UPLC H-class UPLC system combines the speed and performance of UPLC with the ability to run HPLC separations. The system is configured with a PDA detector. …
For department/faculty use only.
Mixing, emulsifying, homogenizing, disintegrating and dissolving liquid samples…
For department/faculty use only.
The APV systems APV-2000 homogenizer was designed for R&D laboratories within the food, dairy, chemical, cosmetic, biotech, and pharmaceutical industries. Its compact design is suitable for benchtop location and provides both quiet and smooth operation. …
For department/faculty use only.
Mixing, emulsifying, homogenizing, disintegrating and dissolving liquid samples…
For department/faculty use only.
Measure particle size based on Mie Scattering and Fraunhofer diffraction; for both liquid and solid samples
…
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
For department/faculty use only.
Circular Dichroism (CD) is an absorption spectroscopy method based on the differential absorption of left and right circularly polarized light…
For department/faculty use only.
The Agilent 6130 Single Quadrupole LCMS System is a high-performance liquid chromatography-mass spectrometry instrument that combines the separation capabilities of liquid chromatography with the detection capabilities of mass spectrometry. It uses a single quadrupole mass filter to perform accurate and sensitive mass analysis, making it ideal for a wide range of applications including protein and peptide analysis, metabolomics, and small molecule analysis….
For department/faculty use only.
The Xevo® G2-XS QTof is a high-resolution LCMS that combines StepWaveTM ion optics with the XS Collision Cell, providing a significant increase in sensitivity with no reduction in selectivity. During long analyses, critical hardware components stay clean for longer, so results are more reproducible and the laboratory stays productive….
For department/faculty use only.
Shimadzu’s GCMS-QP2020 is a high-end single quadrupole gas chromatograph mass spectrometer that offers excellent performance and smart operability, and the instrument satisfies a wide range of needs for single quadrupole GCMS systems. …
For department/faculty use only.
High shear fluid processor, high efficiency cell rupturing and high performance micro-mixing of emulsions and dispersions…
For department/faculty use only.
Studying adhesion, absorption, wetting behavior, bonding quality, surface treatments and coatings…
For department/faculty use only.
A Raman Microscope with 3 integrated lasers for chemical imaging purposes. …
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system equipped with a DAD detector for chromatographic analysis. …
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system with UHPLC compatibility. The system is equipped with a DAD detector for chromatographic analysis….
For department/faculty use only.
Prep LC with DAD…
For department/faculty use only.
An HPLC system equipped with DAD, FLD and fraction collector…
For department/faculty use only.
An HPLC system equipped with a UV detector…
For department/faculty use only.
The LCMS-8040 is a triple quad LCMS system that offers ultra-high sensitivity, speed, and reliability with improved ion optics, fast MRM transitions, and automated optimization….
For department/faculty use only.
With its array of ultrafast capabilities, the single quadrupole LCMS-2020 mass spectrometer provides the ultimate in high-speed analysis with unrivaled sensitivity. It offers faster, more accurate detection of trace impurities present in pharmaceuticals samples, environmental pollutants, or other samples. …
For department/faculty use only.
Real-time PCR detection system, combining advanced optical technology with precise temperature control to deliver sensitive, reliable detection for singleplex or multiplex reactions…
For department/faculty use only.
The CFX Connect Real-Time PCR System provides excellent thermal performance for two-target multiplex PCR and routine detection of single fluorophore experiments….
For department/faculty use only.
The GloMax® Explorer is a high-performance multimode microplate reader, which can be used as a standalone plate reading instrument or integrated into a high-throughput automated workflow….
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
For department/faculty use only.
BioTek Synergy H1 is a modular multimode microplate reader, with monochromator-based optics and filter-based optics for fluorescence and luminescence detection. …
For department/faculty use only.
This UHV Vacuum Generators ESCALAB Mk2 system has upgraded with Omicron 7-Channeltron analyser with XPS, UPS and mono-XPS in one analysis chamber and a deposition (SIMS being replaced) chamber in the other….
For department/faculty use only.
Our current setup is suitable for examining crystal-like substrates/samples. Results will depend on how crystalline the sample is. Theta-two theta scan MSDS and RA are to be provided. XRD is for crystalline sample….
For department/faculty use only.
Experience simplified high-throughput sample processing and more control with the JXN-26 centrifuge with powerful high-speed features, low heat output, imbalance tolerance and quiet performance. …
For department/faculty use only.
Beckman Coulter’s Optima™ XPN ultracentrifuge is a premiere ultracentrifuge that offers networking capability and security customization, and tracking features to ensure chain of compliance. …
For department/faculty use only.
ICH 110 Memmert stability climate chambers guarantee the perfect atmosphere for climate and temperature tests. …
For department/faculty use only.
Centrifugal evaporator with vacuum…
The JSM-6700F is a field emission scanning electron microscope (FESEM) incorporating a cold cathode field emission gun, ultra-high vacuum, and sophisticated digital technologies for high-resolution, high-quality imaging of microstructures. …
For department/faculty use only.
Coating of non-conductive sample with platinum…
For department/faculty use only.
Icon XYZ Closed-Loop SPM Scan Head with nominal range of 90 µm x 90 µ and vertical range of 10 µm…
For department/faculty use only.
Spray granulation, microencapsulation, micronizing, and aggregation. Efficient powder recovery with spray dryer….
For department/faculty use only.
The Ring Shear Tester RST-XS.s is an easy to operate shear cell tester for the precise determination of flow properties of fine-grained powders and bulk solids….
For department/faculty use only.
TurboVap LV evaporation system is an automated high-speed, low-volume sample concentrator. It is an efficient alternative to the inconvenient set-up, constant monitoring and long evaporation times that are characteristic of conventional techniques. …
For department/faculty use only.
Liberty Blue is an ultra-efficient automated peptide synthesizer, delivering high-quality peptides with record low waste generation and synthesis times. …
For department/faculty use only.
The Beckman Avanti® J-26S XP High Performance Centrifuge is a fast and specialized high-speed centrifuge system exclusively designed to process up to six litres in less than 10 minutes. …
The Tecnai G2 Spirit BioTWIN is fitted with the BioTWIN lens configurations, specifically designed to maximize contrast in images of inherently low-contrast and is well suited for exploring the 2D and 3D structures. The microscope is equipped with the FEI Eagle 4K digital camera. The bottom-mounted camera has a very large dynamic range, a high resolution and is optimized for high sensitivity….
The EVOS M7000 microscope is a fully automated, no-personal-contact imaging system. It incorporates both monochrome and color high-resolution CMOS cameras for the best of both fluorescent and colorimetric imaging. The M7000 can scan multiwell plates automatically and features speedy autofocus, image acquisition, and large data processing….
This microscope performs epifluorescence, rather than confocal fluorescence microscopy. It is great for imaging immunohistochemistry samples, and also for imaging living cells in culture over extended time periods. The software allows one to image several distinct coordinates (e.g. different wells) at set time periods (e.g. every 30 minutes) on cells in culture. The temperature, CO2 and humidity controlled chamber enables live cell experiments to be performed over extended time periods, e.g. viral plaque formation assays, scratch assays etc. It is equipped with low-light digital image capture and is fully automated….
This facility aims to bring together experts in the NUHS bioinformatics community to support research needs through data analysis, data management support and education….
The Electrophysiology Core@NUS Medicine has extensive experience in (1) characterizing disease associated ion channel mutations (2) screening of novel modulators of ion channels (3) characterizing primary or hIPSC-derived neurons or cardiomyocytes. (4) performing patch clamp recording from acutely isolated brain slice (5) recording end-plate potential in neuromuscular junction from acutely isolated phrenic nerve-diaphragm preparation (6) performing whole endolysosomal recording. The core has also collaborated with various partners such as DSO, A*STAR, NTU and SGH….
Established in 2018, the NUSMed noncoding RNA (ncRNA) Core seeks to support NUS/NUHS investigators in interrogating intracellular/circulatory ncRNA profiles/functions in diverse experimental/clinical human and animal model specimens (including biofluids, fresh frozen cells/tissues and formalin-fixed paraffin-embedded tissues). To achieve this goal, we collaborate with industry partners and leverage on their cutting edge technologies to isolate/profile/perturb ncRNAs to study their expression/forms and functions in biospecimens….
The FLUOVIEW FV3000 Series is designed to meet some of the most difficult challenges in modern science. With the high sensitivity and speed required for live cell and tissue imaging and the ease of use and flexibility required for microplate imaging and complex screening protocols, the FV3000 series supports complete workflows from live cell 2D to 6D imaging through image processing, like deconvolution, and analysis. Built for fast, stable, and accurate measurements of biological reactions within living cells or tissues, even novice users can generate high-quality data and images….
The FV1000 confocal laser scanning biological microscope featured the world’s first twin scan system. This system enabled time-resolved spectroscopy of living intercellular contents and also made it possible to analyze objects down to a 2 nm wavelength resolution. Image size was increased to 4096 x 4096-pixels….
This system is capable of generating crosstalk-free multi-fluorescence images with simultaneous excitation of samples stained up to four colours. The TwinGate main beam splitter permits a myriad combinations of excitation wavelengths and excitation laser light suppression for improved single-to-noise ratio imaging. In addition, the multiple position feature simplifies the multidimensional imaging process. This microscope is also equipped with an environmental control chamber large enough to contain the objective lenses to minimize mechanical drift due to temperature difference during time-lapse imaging….
TissueFAXS can scan digital slides or images of tissue sections, Tissue Microarrays (TMA), cell culture monolayers, smears and of other samples on slides and oversized slides, in Microtiter plates, Petri dishes and plates in both bright-field and epifluorescence modes. It is capable of flexible imaging. TissueFAXS aims to make image acquisition more efficient with its adjustable autofocus scan strategy, autofocus interval range across samples and its instantaneous internal stitch features….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
This equipment quantifies the amount of C, H, N and S in solid samples….
This microscope enables surface back scatter electron imaging and ion milling….
This is an entry level TEM imaging at room temperature and cryo temperature….
This is a high-end Material electron microscopy with electron direct detector….
This is a high-end Material electron microscopy with CMOS detector….
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
A lightsheet microscopy with dipping lens for fast fluorescence imaging with super resolution…
A lightsheet microscopy with two orthogonally arranged dipping lenses for live imaging with isotropic resolution….
TIRF, FRAP and widefield fluorescent microscopy with DIC….
An instrument for cryosectioning of biological samples….
A high end workstation for image processing post acquisition, with licensed software: Amira, SlideBook, Imaris, Matlab….
A high end workstation for image processing post acquisition, with licensed software: Amira, Cellsens, Imaris, Huygenspro….
A high end workstation for image processing post acquisition, with licensed software: Amira, Luxbundle, Imaris, Huygenspro (with lightsheet module)….
This system enables cryo sample plunge freezing….
For department/faculty use only.
Multiphoton excitation occurs when two (or more) photons, whose summed energy is sufficient to excite a fluorophore, arrive simultaneously. The use of near infrared light to excite a fluorophore in the visible range allows multiphoton microscopy to image deeper within tissue than confocal microscopy. Additionally, since the signal is spatially confined to the focal plane of the objective, it eliminates the necessity for a confocal pinhole to generate optically sectioned images, which greatly improves detection sensitivity. The spatial confinement of signal generation also reduces overall photobleaching. These advantages make multiphoton microscopy the ideal choice for imaging deep within live tissue over long periods of time….
For department/faculty use only.
Our BD FACS Melody is a benchtop cell sorter inside the BSC. It is capable of sorting up to eight different fluorescent markers simultaneously, making it ideal for complex multi-color experiments. The system features intuitive software, automated setup, and maintenance protocols, ensuring quick and accurate sorting with minimal user intervention….
For department/faculty use only.
The MACSQuant VYB flow cytometer comes with a uniquely configured optical bench, featuring violet, yellow, and blue lasers. It is a perfect match for labs utilizing fluorescent protein reporters or for labs that want to simply use PE and FITC conjugates….
For department/faculty use only.
The Cytek Aurora leverages full spectrum technology, enabling the use of a wide array of new fluorochrome combinations without reconfiguring the system for each application. The Aurora system delivers high-resolution data at the single-cell level to resolve the most challenging cell populations, such as cells with high autofluorescence or low levels of expression of key biomarkers, regardless of assay complexity….
For department/faculty use only.
The BD FACSAria III Cell Sorter is a high-speed, high-precision flow cytometer designed for advanced cell sorting applications. It features state-of-the-art optics and fluidics systems, allowing for simultaneous sorting of up to four populations with high purity and yield. Our system offers customizable configurations with five lasers and multiple fluorescence detectors, supporting complex multi-color experiments….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The JEM-1400Flash is equipped with a high-sensitivity sCMOS camera, “Matataki Flash”, JEOL’s innovative high-sensitivity sCMOS camera that dramatically reduces the readout noise while possessing high frame rate. This powerful feature enables high-throughput acquisition of sharp TEM images with extremely low-noise. The Limitless Panaroma (LLP) is a montage system capable of utilizing stage drive for the field shift. This new system allows for simple capture of a montage panorama image over a limitless wide area. Thus, an ultra-wide area, high pixel-resolution image is obtainable….
The Quanta 650 features a large sample chamber that enables imaging of samples of all sizes. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. Surface imaging with beam deceleration mode is possible to obtain surface and compositional information. Easy to use and intuitive controls make highly effective operation possible for novice users. The MAPS software does automatic acquisition of large overviews at any magnification, allowing high resolution imaging of large areas….
The JSM-6701F is suitable for observation of fine structures such as multi-layered film and nano particles fabricated by the nano technology. The high-resolution semi in-lens enables one to observe delicate specimens with minimum damage at very low accelerating voltages. At lower voltages, the fine surface structures can be observed more clearly than at higher voltages. It can be used to collect topographic information (SE and LEI mode) and observe elemental contrast (BSE mode) in the sample….
Luminex® xMAP® technology combines advanced fluidics, optics, and digital signal processing with proprietary microsphere technology to deliver both high density and high throughput multiplexed assay capabilities at the same time….
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
The MoFlo Astrios is the new standard for cell sorting with functionality, speed, and improved sensitivity. It is designed for researchers who desire high productivity with more analytical capability and with biosafety solutions. The ergonomic design of Astrios makes it faster and easier to operate. All components requiring operator control are within easy reach….
The BD LSRFortessa™ cell analyzer offers the ultimate choice for flow cytometry, providing power, performance, and consistency. Designed to be affordable and expandable, the BD LSRFortessa has the flexibility to support the expanding needs of multicolor flow cytometry assays….
The CytoFLEX LX Flow Cytometer is an expansion of the CytoFLEX Platform. This model expands research possibilities with up to six lasers and 21 color parameters. Six spatially separated lasers allows panels to be spread across the spectrum reducing cross talk and spectral overlap….
Flow NanoAnalyzer can be used for the multiparameter characterization of natural and synthetic nanoparticles (7-1000 nm) at the single-particle level. Combining light scattering and fluorescence detection, high-resolution distributions of particle size and biochemical properties can be acquired simultaneously in 1-2 minutes….
The SP8 DIVE (Deep In Vivo Explorer) is the first multiphoton microscope with spectrally tunable detection. This microscope provides spectral freedom, and offers unlimited flexibility and enables users to develop new multicolor deep in vivo experiments.The SP8 DIVE also provides maximum penetration depth and best contrast, and the new Vario Beam Expander can be tuned for improved penetration depth of more than 1 mm and maximum resolution….
The central HPC facility provides computing resources to support compute-intensive research and AI workloads, including the provisioning of many-cores CPU, GPU, and high-speed data storage….
A central service to host large-scale research data for archival purpose….
The service provides access to AWS & GCP cloud platform for researchers to use their services. NUS IT offers this service to onboard the researchers’ account under NUS subscription to enjoy private discounts on both platform (10-20% depending on the service)….
The service provides rack spaces for researchers to host their servers and other rack-mounted IT equipment….
An ultracentrifuge is a high-speed centrifuge used to separate particles based on density, such as proteins, nucleic acids, and cellular components, in research and industrial applications….
This PCR equipment amplifies specific DNA segments, enabling detailed analysis for applications in research, diagnostics, and forensics….
This PET-CT equipment combines Positron Emission Tomography (PET) and Computed Tomography (CT) in one scanner. It provides detailed images by detecting metabolic activity (PET) and anatomical structures (CT), helping diagnose, stage, and monitor diseases like cancer….
This Aerosol Infection System generates controlled airborne particles containing pathogens to study respiratory infections. It ensures precise dosing and safety for researching disease transmission, vaccine efficacy, and treatments….
Type A2 Canopy duct BSC with NSF49 enhanced and certified annually…
Type B2 BSC with NSF49 enhanced and certified annually…
Class III BSC with NSF49 enhanced and certified annually…
Class I Enclosure with NSF49 enhanced and certified annually…
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
The MAGPIX® system integrates fluidics, mechanical, electronic, and optical subsystems with magnetic microspheres and advanced computer analysis to perform multiplex assays. Magnetic beads coated with specific reagents capture and detect analytes from samples. The sample is aspirated and conveyed into a camera chamber, where beads are immobilized and imaged under red and green LEDs. The red LED classifies the beads by color signature, while the green LED measures reporter fluorescence to quantify captured analytes. Beads are then flushed out, readying the system for the next sample….
The FlexStation 3 reader combines Molecular Devices SpectraMax® M5e Multi-Mode Microplate Reader performance with an integrated 8- or 16-channel pipettor into one compact benchtop reader. This integrated system provides users with a multi-detection platform capable of increasing the liquid handling throughput and flexibility for biochemical- and cell-based kinetic assays….
THUNDER Imagers tackle biologically-relevant 3D models, providing high-speed, multicolour imaging for both thin and thick samples. They offer enhanced temporal resolution and real-time clarity of details, even deep within intact specimens, eliminating out-of-focus blur. …
An expert from Yong Loo Lin School of Medicine, Drug Discovery and Optimization Platform (DDOP), Winston Liao Wupeng is the person to approach for queries involving in the area of Drug discovery and development, Respiratory disease models, Multiplexing technology, Imaging…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Isabelle Bonne is the person to approach for queries involving in the area of Light microscopy, Confocal microscopy, Multiphoton microscopy, Electron microscopy…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Lucas Lu Thon Beng is the person to approach for queries involving in the area of Sample preparation for Electron microscopy, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, Volume Electron Microscopy (vEM)…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Delia Pang is the person to approach for queries involving in the area of 3D Imaging, 3D Visualisation, Brightfield, Fluorescence, Multiphoton, Scanning confocal, Slide scanning, Widefield…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Wu Yue is the person to approach for queries involving in the area of Light microscopy, Multiphoton, High density cell culture, Micromotors…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Kay En Low is the person to approach for queries involving in the area of Sample preparation for Electron microscopy, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, and Correlative Light Electron Microscopy (CLEM)…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Samaksh Singh (Sam) is the person to approach for queries involving in the area of Bioimage analysis, Segmentation, and Quantification for Electron Microscopy data…
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Aik Yong Sim is the person to approach for queries involving in the area of Electron Microscopy sample preparation, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, and Volume Electron Microscopy (vEM)…
An expert from Yong Loo Lin School of Medicine, Sabrina Adam is the person to approach for queries involving in the area of Multiplexing technology in quantitative proteomics and transcriptomics…
An expert from Yong Loo Lin School of Medicine, Marek Kukumberg is the person to approach for queries involving in the area of Multiplexing technology in quantitative proteomics and transcriptomics…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Camillo Benetti is the person to approach for queries involving in the area of Mass spectrometry, Chromatography, Sample concentration, Microfluidics, Spectroscopy, Spray drying, Material testing, Peptide synthesis…
An expert from Faculty of Science, Centre for BioImaging Sciences (CBIS), Light Microscopy Core, Lin Yangchen is the person to approach for queries involving in the area of Confocal, Spinning disc with TIRF & FRAP, Lightsheet, Cryostat, Image process…
An expert from Faculty of Science, Food Science & Technology, Jiang Xiaohui is the person to approach for queries involving in the area of Amino acid analysis, Fat extraction, Hydrolysis, Color measurement, Microplate analysis, Spectroscopy, Freeze drying, Rheological analysis, Zeta potential measurement, Homogenization, Particle size analysis, Texture analysis, Elemental analysis, General analysis, Powder production, Viscosity measurement, Thermal analysis, Extrusion technology…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Chromatography Laboratory, Liu Qiping is the person to approach for queries involving in the area of LC, DAD, PDA, FLD, GCMS, GC, FID…
An expert from Faculty of Science, Protein and Proteomics Centre and SingMass, Lim Teck Kwang is the person to approach for queries involving in the area of Proteomics, Quantitative proteomics, Shotgun proteomics, Structural proteomics, Imaging systems, Microplate readers, SWATH, MRM, QTRAP, HDX exchange, Ion mobility, Sedimentation velocity, Sedimentation equilibrium…
An expert from Duke-NUS FACS Core Facility, Zeming Lim is the person to approach for queries involving in the area of Flow cytometry…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), NMR Laboratory, Han Yanhui is the person to approach for queries involving in the area of NMR, ESR, EPR…
An expert from College of Design and Engineering, University Electron Microscopy Centre, APT Facility, Tan Xipeng is the person to approach for queries involving in the area of Brightfield, Widefield, Fluorescence, 3D imaging, Scanning Confocal, Spinning Disk confocal, Multiphoton, Live cell imaging, Calcium imaging, F-techniques, FRAP, FCS, FCCS, Image analysis, 3D visualisation, Experimental planning…
An expert from College of Design and Engineering, University Electron Microscopy Centre, APT Facility, Jonathan Aristya Setyadji is the person to approach for queries involving in the area of Brightfield, Widefield, Fluorescence, 3D imaging, Scanning Confocal, Spinning Disk confocal, Multiphoton, Live cell imaging, Calcium imaging, F-techniques, FRAP, FCS, FCCS, Image analysis, 3D visualisation, Experimental planning…
An expert from Faculty of Science, Food Science & Technology, Lew Huey Lee is the person to approach for queries involving in the area of Mass spectrometry, Analytical techniques, Kjeldahl analysis, Chromatography, Sample analysis, Homogenization, Moisture analysis, Viscosity measurement…
An expert from Faculty of Science, Food Science & Technology, Lu Yuyun is the person to approach for queries involving in the area of Mass spectrometry, Sample concentration, Analytical chemistry, Natural product analysis, Chromatography…
An expert from Faculty of Science, Food Science & Technology, Oh Kai Ling is the person to approach for queries involving in the area of Kjeldahl analysis, Fat extraction, Hydrolysis, Chromatography, Ash content analysis, Spectroscopy, Freeze drying, Emulsification, Texture analysis, Elemental analysis…
An expert from Faculty of Science, Food Science & Technology, Hanny Putri Pranata is the person to approach for queries involving in the area of Zeta potential analysis, Particle size analysis, Homogenization, Viscosity measurement, Thermal analysis…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Lee Soon Fatt is the person to approach for queries involving in the area of Mass spectrometry, Chromatography, Sample concentration, Microfluidics, Spectroscopy, Spray drying, Material testing, Peptide synthesis…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Physics, Evlyn Chan is the person to approach for queries involving in the area of Particle size and charge analysis, Flow cytometry, PCR and gene analysis, Microplate reading, Centrifugation, Environmental control…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Cavan Tong is the person to approach for queries involving in the area of Hidex, Microplate reader, S7-02…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Sukaman Bin Seymo is the person to approach for queries involving in the area of Contact angle…
An expert from Faculty of Science, Physics, Tan Jyh Harng is the person to approach for queries involving in the area of Scanning electron microscopy, Sample preparation, Atomic force microscopy, X-ray photoelectron spectroscopy…
An expert from Faculty of Science, Physics, Dicky Seah is the person to approach for queries involving in the area of XRD…
An expert from NUS Information Technology, Wang Junhong is the person to approach for queries involving in the area of High-performance computing, Multi-core cluster, GPU accelerators, Scientific applications…
An expert from NUS Information Technology, Yeo Eng Hee is the person to approach for queries involving in the area of Cloud computing, AWS, Google cloud platform, Data storage…
An expert from NUS Information Technology, Gee Chao Ping is the person to approach for queries involving in the area of Colocation, Data center…
An expert from Yong Loo Lin School of Medicine, Paediatrics, Huang Chiung-Hui is the person to approach for queries involving in the area of Flow cytometry assays…
An expert from Yong Loo Lin School of Medicine, BSL-3 Core Facility, Sindhu Ravindran is the person to approach for queries involving in the area of Biosafety coordinator…
An expert from Yong Loo Lin School of Medicine, Bioinformatics Core, Cheng Shangying is the person to approach for queries involving in the area of Bioinformatics, Data analysis, Data management…
An expert from Yong Loo Lin School of Medicine, Electrophysiology Core, Huang Hua is the person to approach for queries involving in the area of Electrophysiology, Patch clamp, Functional characterization…
An expert from Yong Loo Lin School of Medicine, ncRNA Core, Cheong Jit Kong is the person to approach for queries involving in the area of ncRNA profiling, miRNA profiling, Functional characterization…
An expert from Yong Loo Lin School of Medicine, Confocal Microscopy Core, Lee Shu Ying is the person to approach for queries involving in the area of Microscopy…
An expert from Yong Loo Lin School of Medicine, Flow Cytometry Core, Wang Xiaoning is the person to approach for queries involving in the area of Cell sorting…
An expert from Yong Loo Lin School of Medicine, Electron Microsopy Unit, Micky Leong is the person to approach for queries involving in the area of Electron microscopy…
An expert from Yong Loo Lin School of Medicine, Neuroscience & Metabolic Phenotyping Core, Wong Peiyan is the person to approach for queries involving in the area of Rodent behavorial testing, Metabolic phenotyping…
An expert from Yong Loo Lin School of Medicine, Theranostics Center of Excellence, Zhao Tianzhi is the person to approach for queries involving in the area of Quantitative imaging…
An expert from Yong Loo Lin School of Medicine, Theranostics Center of Excellence, Zhao Mengyao is the person to approach for queries involving in the area of Quantitative imaging…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Mass Spectrometry Laboratory, Yuan Cheng-Hui is the person to approach for queries involving in the area of BET, Physisorption, Surface area, Pore size, LCMS, GCMS, MALDI, ESI…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Thermal Analyses Laboratory, Tan Wei Ling is the person to approach for queries involving in the area of Thermal analysis, Microwave digestion, Elemental analysis, Ion chromatography, Fluorescence spectroscopy…
An expert from Faculty of Science, Sustainable Urban Farming (SUrF) Facility, Cheryl Wang is the person to approach for queries involving in the area of Plant phenotyping…
An expert from Faculty of Science, Protein and Proteomics Centre, Wang Xian Hui is the person to approach for queries involving in the area of Sedimentation velocity, Sedimentation equilibrium…
An expert from Faculty of Science, CBIS LM Core, Tong Yan is the person to approach for queries involving in the area of Confocal, Spinning disc with TIRF & FRAP, Lightsheet, Cryostat, Image process…
An expert from Faculty of Science, Centre for BioImaging Sciences (CBIS), CryoEM Facility, Shi Jian is the person to approach for queries involving in the area of CryoEm sample preparation, SEM and FIB, TEM, Cryo-TEM, CryoEM, TEM-Material science, SPA, Tomography, MicroED, HR-TEM, STEM, 4D-STEM…
An expert from Duke-NUS Animal Facility, Shawn Je is the person to approach for queries involving in the area of Molecular and cellular mechanisms, Underlying neurological and psychiatric disorders…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), NMR Laboratory, James Loke Wen Liang is the person to approach for queries involving in the area of NMR…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Electron Microscopy Laboratory, Cheng Liyan is the person to approach for queries involving in the area of XPS, SEM, TEM…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), X-Ray Diffraction Laboratory, Tan Geok Kheng is the person to approach for queries involving in the area of Single crystal, X-ray diffraction, Absolute configuration, Structural determination, Structure refinement, Powder X-ray diffraction, GID measurement for thin film…
An expert from Faculty of Science, X-Ray Diffraction Laboratory, Irwan Iskandar Bin Roslan is the person to approach for queries involving in the area of Single crystal, X-ray diffraction, Absolute configuration, Structural determination, Structure refinement…
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Leng Zhi Jin is the person to approach for queries involving in the area of Powder XRD, Particle sizer, Zeta potential…
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Wong Ling Rong is the person to approach for queries involving in the area of Powder XRD…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), X-Ray Diffraction Laboratory, Heng Su Peng is the person to approach for queries involving in the area of Thermal analysis, Microwave digestion, Elemental analysis, Ion chromatography, X-ray diffraction, Particle characterization…
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Mya Mya Khin is the person to approach for queries involving in the area of Raman microscope, Material tensile, Material shear, Material compression…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Mass Spectrometry Laboratory, Wong Lai Kwai is the person to approach for queries involving in the area of BET, Physisorption, Surface area, Pore size, LCMS, GCMS, MALDI, ESI…
An expert from College of Design and Engineering, Materials Science and Engineering, Electron Microscopy Facility, Yang Fengzhen is the person to approach for queries involving in the area of Transmission electron microscopy (TEM)…
An expert from College of Design and Engineering, Materials Science and Engineering, Shen Jingjing is the person to approach for queries involving in the area of Scanning Electron Microscopy (SEM)…
An expert from College of Design and Engineering, Materials Science and Engineering, Chen Qun is the person to approach for queries involving in the area of X-Ray Diffraction (XRD)…
An expert from College of Design and Engineering, Materials Science and Engineering, Henche Kuan is the person to approach for queries involving in the area of Thermal analysis, Stylus profilometry, Spectrometry (UV-Vis), Spectrometry (FTIR), Spectrometry (Fluorescence)…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Ashley Xu is the person to approach for queries involving in the area of Helium ion microscopy, Material science, Optical spectroscopy, Nanofabrication, Electron microscopy, 2D materials, 2D material characterization…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Chiam Taw Chun is the person to approach for queries involving in the area of Material science, Nanofabrication, Electrical characterisation, 2D materials…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Li Haobo is the person to approach for queries involving in the area of Materials Science, Thin film and 2D materials deposition and characterization, Photolithography…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Tihomir Marjanovic is the person to approach for queries involving in the area of Material Science, Precise instrumentation, System optimization in nanotechnology and electrical control system…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Jian Linke is the person to approach for queries involving in the area of Microfabrication, Lithography, SEM imaging, ICP dry etching, Optical mask making, Thin film deposition(eBeam & Thermal)…
An expert from College of Design and Engineering, E6 NanoFab, Patrick Tang is the person to approach for queries involving in the area of General tool management…
An expert from College of Design and Engineering, E6 NanoFab, Loh Fong Leong is the person to approach for queries involving in the area of General tool management…
An expert from College of Design and Engineering, E6 NanoFab, Thomas Ang is the person to approach for queries involving in the area of Microelectronic fabrication…
An expert from College of Design and Engineering, E6 NanoFab, Htike Aung is the person to approach for queries involving in the area of Microelectronic fabrication…
An expert from College of Design and Engineering, E6 NanoFab, David Xu Baochang is the person to approach for queries involving in the area of Microelectronic fabrication…
An expert from College of Design and Engineering, E6 NanoFab, Xiao Yun is the person to approach for queries involving in the area of Lithography…
An expert from College of Design and Engineering, E6 NanoFab, Lin Zhong Guan is the person to approach for queries involving in the area of Microelectronic fabrication…
An expert from College of Design and Engineering, E6 NanoFab, Chua Kut Tiong is the person to approach for queries involving in the area of Microelectronic fabrication…
An expert from College of Design and Engineering, E6 NanoFab, Linn Linn is the person to approach for queries involving in the area of Semiconductor device cross section analyses, Advanced coating thickness and structure uniformity determination, Small contamination feature geometry and elemental composition measurement…
An expert from College of Design and Engineering, E6 NanoFab, Musni is the person to approach for queries involving in the area of Raman microscopy…
An expert from College of Design and Engineering, E6 NanoFab, Manohar Lal is the person to approach for queries involving in the area of Sub-10nm nanofabrication and nanolithography…
An expert from College of Design and Engineering, Electron Microscopy Facility, Tan Shengdong is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Electron Microscopy Facility, Yao Bingqing is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Electron Microscopy Facility, Zhou Xin is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Chung Jing Yang is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…