The APT device enables near-atomic level resolution (~0.2 nm depth & ~0.4 nm lateral) and 3D compositional mapping with high chemical sensitivity (<5 appm) by field evaporation and time-of-flight mass spectrometry. ...
The APT device enables near-atomic level resolution (~0.2 nm depth & ~0.4 nm lateral) and 3D compositional mapping with high chemical sensitivity (<5 appm) by field evaporation and time-of-flight mass spectrometry. ...
XDD beam line and its experimental station are designed for a general purpose of diffractometry, fluorescence detection and absorption spectroscopy, which will serve the research and development with structural determination, characterization and process monitoring in universities, institutes and industry in Singapore and the region….
Our most advanced XPS AXIS Supra+ provides a range of applications for surface science analysis. It comes with a heat and cool accessories that allow samples mounted on the sample holder to be heated up to +800°C or cooled to <100°C within the Flexi-lock and/or Sample Analysis Chamber....
For department/faculty use only.
This device is used for untargeted compound (metabolomics) analysis and compound characterization. …
High-definition positron emission tomography (HD-PET) scanner combined with a 128 slices Computed tomography (CT) scanner for high resolution anatomical co-registration. The 78 cm bore opening allows for the scanning of large subjects with a uniform resolution of the PET images of 2 mm….
The JSM-IT710 HR SEM is a high resolution SEM with the simple SEM function and Zeromag mode, that provides the versatility to handle a wide variety of samples and workflow designed for fast results. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. The SEM is also equipped with Oxford AZtecLiveLite EDS software and Xplore 65 detector for elemental analysis. The SEM has capabilities to perform automatic acquisition for volume EM with the Array Tomography software or Serial Block Face software, with the ConnectomX Katana microtome attached. …
A versatile AFM that can capture images of air-sensitive materials that are inherently distortion-free and reproducible. Equipped with easy tip exchange combined with SmartScan software’s one-click imaging and pre-programmed advanced modes. …
High throughput quantitative proteomics or transcriptomic by multiplexing…
LED I-V tester performs I-V measurement to determine the power conversion efficinecy of solar cell. It uses LED light enigne as light source, with illumination area of 16 cm x 16 cm. It is ideal for performing measurement of 5 busbar M2 sized solar cell….
Xenon-lamp based I-V tester performs I-V measurement to determine the power conversion efficiency of solar cell. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
Xenon-lamp based flash I-V tester performs I-V measurement to determine the power conversion efficiency of photovoltaic module. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
Custom setup to perform outdoor Potential Induced Degradation stress on PV module. System will apply up to +1500 or -1500 V to the PV modules for a specified duration….
Extra Ultraviolet (EUV) Branch Beamline is a second branch of the main SINS beamline. Its primary purpose is to measure the reflectivity of EUV optical components…
The soft X-ray-ultraviolet (SUV) beamline is a state-of-the-art beamline producing photons with selective polarizations. It covers the photon energy range from soft X-ray to ultraviolet, which can be used for various advanced optical, spectroscopy and scattering measurements. This integrated characterization-and-growth facility aims to study and distinguish the interplay between spin, charge, orbital and lattice degrees of freedom of advanced materials from solid state physics to biological systems, with various forms, e.g. nanoparticle, ultrathin film to bulk….
General purpose SEM that performs imaging of surface morphology of conductive samples, using electrons as the beam. Useful for studying surfaces with sub-micrometer structures….
ISMI (Infrared Spectro/Microscopy) beamline provides a state-of-the-art Fourier Transform IR spectrometer and microscope to supply diffraction-limited spatial resolution to an ever-widening range of infrared spectroscopy experiments. Synchrotron based source provides a versatile infrared radiation that covers a spectral range from 10000 to 10 cm-1 and has considerable brightness advantages over conventional (thermal) IR sources enabling IR experiments with high resolution and studies of extremely small or diluted samples….
SINS facility uses a bending magnetic beamline to deliver photon with an energy range from 50-1200 eV for end-station to cover the K-edges of light elements (C, N, and O) and L-edges of transition metals, and M-edges of part of rare earth metals, with user selectable linear and circular polarization for soft x-ray photon. There are two measurement chambers (main chamber and XMCD chamber) in the end-station, which are designed for X-ray photoelectron spectroscopy (XPS), angle-resolved photoemission (ARPES), X-ray absorption spectroscopy (XAS), X-ray linear dichroism (XMLD) and X-ray magnetic circular dichroism (XMCD) experiments….
This equipment is used for deep tissue observation, 3D image reconstruction and live cell imaging….
This analyzer measures and reports the oxygen consumption rate (OCR), proton efflux rate (PER) or extracellular acidification rate (ECAR), as well as ATP production rates of live cells in a 96-well format. It features excellent OCR precision at low rates, verified instrument performance, optimized temperature control, and is automation enabled….
The LSM710 is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels). It is optimized for imaging of cells, tissues, and small organisms….
The 6550 iFunnel Q-TOF LC/MS system offers both high sensitivity and high-resolution mass detection. It is ideally suited for proteomics research and untargeted analyte detection….
A chamber to perform UV light soaking as an accelerated degradation test for PV modules….
LC-QTOF is a versatile analytical technique that enables the identification and characterization of unknown compounds in complex samples. It is not limited to a specific research area and finds applications in various scientific disciplines….
LC-QQQ is an analytical technique commonly used for targeted quantitative analysis in various fields. It is particularly useful in areas such as environmental monitoring, food safety testing, and clinical research….
The VSM is used for measuring magnetic properties such as DC characterisation….
The FV3000NIR is a high-speed motorised confocal laser scanning microscope with NIR imaging capability. Equipped with both galvanometer and resonant scanners, it is suitable for imaging of live and fixed samples in multiple dimensions (xyzt in multiple channels)…
The SAFe 360 STORM is a highly motorised laser scanning microscope for multiple 3D SMLM modalities: PALM, dSTORM , PAINT, and single particle tracking….
The A1r inverted is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels) of fixed samples….
A slide scanner for automated imaging of large numbers of slides for fluorescence, brightfield and polarization….
The FV3000 is a high-speed motorised confocal laser scanning microscope. Equipped with both galvanometer and resonant scanners, it is suitable for imaging live and fixed samples in multiple dimensions (xyzt in multiple channels)….
A live cell, real-time analysis of cellular energy metabolism platform….
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
This equipment uses SQUID-based magnetometry / susceptibility to provide a stable magnetic field for material characterisation….
This equipment is used for visualisation of magnetic domains and magnetization processes as well as for optically recording magnetization curves qualitatively on all kinds of magnetic materials, including bulk specimens like sheets or ribbons, magnetic films and multilayers, patterned films or micro- and nanowires….
The X1-STORM is a multi-modal system that boasts super-resolution fluorescence microscopy and live-cell spinning-disk confocal microscopy by combining N-STORM capabilities and CSU-X1 hardware on one microscope body, united by MetaMorph software….
The iLAS2 TIRF is a total internal reflection fluorescence microscope for imaging close to the coverslip surface in multiple dimensions (xyt in multiple channels)….
The FIBSEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
The FESEM system is used to capture the microstructure image of materials….
The Raman microscope acquires detailed chemical images and highly specific Raman data from discrete points. It analyses both large volumes and traces of material….
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
The JEM-2800 is an advanced workhorse 200 kV transmission electron microscope with a Schottky-type field emission electron source. This multi-purpose S/TEM employs an user-friendly, high-stability operating system for high-resolution imaging in TEM (including diffraction modes) and STEM (imaging and EDS). Equipped with a TMP vacuum system, the JEM-2800 is particularly suited for fast screening of multiple samples….
The scanning electron microscope utilizes a focused beam of electrons to scan the surface of a sample. As the electron beam interacts with the specimen, it generates signals such as secondary electrons, backscattered electrons, and characteristic X-rays. These signals are detected and processed to create an image, revealing the topography, composition, and other features of the sample at high magnifications….
The JEM-ARM200F is a 200 kV cold field-emission, probe-corrected transmission electron microscope with a STEM resolution of 0.078 nm and TEM resolution of 0.1 nm. It also has an energy-dispersive X-ray detector and dual energy loss spectrometers that can form elemental maps at atomic resolution, and a fast CMOS camera. With its probe aberration corrector and ultra-high-resolution pole piece it is particularly suited to STEM imaging and analysis….
The Orion NanoFab Helium Ion Microscope (HIM) operates using ionized Helium or Neon gases rather than electrons for imaging and milling of materials. With the significantly smaller interaction volume, alongside the smaller de Broglie wavelength, the HIM can achieve finer spatial resolution and larger depth-of-field compared to a FE-SEM. Nanomachining fabrication with sub-10 nm feature sizes is achievable through lighter He ions, while faster milling is operated through heavier Ne ions….
The Raman microscope offers advanced confocal imaging capabilities in 2D and 3D. The true confocal Raman microscope enables the most detailed images and analyses to be obtained with speed and confidence. With guaranteed high performance and intuitive simplicity, the LabRAM HR Evolution is the ultimate instrument for Raman spectroscopy. They are widely used for standard Raman analysis, PhotoLuminescence (PL), Tip Enhanced Raman Spectroscopy (TERS) and other hybrid methods….
D8 ADVANCE provides a range of hardware and software solutions for X-ray diffraction and scattering applications, including phase identification, quantitative phase analysis, micro-structure and crystal structure analysis….
The DSC instrument allows user to measure the heat flow into (or out of) a sample when it is heated or cooled, and use the data to determine its melting point, Tg, etc….
The TGA instrument allows the user to measure the mass change in a sample when it is heated at a constant rate, at a constant temperature, or both….
The STA instrument combines function of the TGA and the DSC. It allows user to measure at the same time both the heat flow and the mass change of a sample when it is heated….
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum….
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum. The integrating sphere expands its capability allowing measurement of reflectance spectrum (diffuse or specular)….
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
The fluorescence spectrometer allows user to shine light from UV-Vis range at a sample and collect its fluorescence spectrum….
Fully automated 400MHz NMR spectrometer for routine 1H and multi nuclear acquisition…
The JEOL JES-X320 ESR spectrometer in our lab allows measurements of samples using microwave in the X-band region. It is also equipped with a variable temperature controller (sample temperature range from -150°C to 200°C) and an ultraviolet irradiation apparatus (for photoexcitation of sample)….
This equipment is able to investigate the surface chemistry of materials by measuring the elemental composition, chemical state, and electronic state of the elements within the top few nanometers of the surface….
Bruker D8 Venture is a Single Crystal X-ray Diffractometer equipped with dual source, four-circle kappa goniometer. It is used for single crystal structure analysis….
Bruker D8 Advance is a Powder X-ray Diffractometer equipped with CuKα source, Goebel Mirror, an XYZ Stage with motorized z-adjustable and LYNXEYE XE-T detector for thin film sample measurements at room temperature….
The Park NX10 AFM features a True Non-Contact™ scan Mode that produces high resolution and accurate data by preventing destructive tip-sample interaction during a scan. Its compact and rigid ‘Step-and-Scan’ enables programmable multiple region imaging….
Stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
500MHz NMR spectrometer with iProbe for 1H and multinuclear acquisition…
500MHz NMR spectrometer with inverse probe for 1H and multidimensional experiment…
400MHz solid state NMR spectrometer 4mm CPMAS probe for multi nuclear acquisition…
Simultaneous DSC-TGA – MS provides simultaneous measurement of heat flow (DSC) and weight change (TGA) from ambient to 1500°C along with evolved gas analyses via the bench top Pfieffer MS up to 300 amu….
This device allows acid digestion of samples under high temperature 240°C and pressure up to 199 bar….
This device quantifies the amount of elements present in the samples down to sub ppm levels….
This equipment enables quantitative analyses of anions such as F, Cl, Br, NO3, PO4, SO4 in aqueous samples….
The D8 ADVANCE is an adaptable diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The D8 ENDEAVOR is a fast automated diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The D2 PHASER is a benchtop diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
The Zetasizer Nano ZS is a high-performance two-angle particle and zeta potential analyzer for the enhanced detection of aggregates and small particles….
Dynamic Mechanical Analyzer (DMA) is equipped with interchangeable clamps such as single cantilever, dual cantilever, 3-point bending, dual film tension, shear and compression. Operation temperature range is from -150°C to 400°C….
Gas chromatography–mass spectrometry, GC-MS, is used to identify the molecular weight, elemental constitution, and molecular structure of the compounds present in the sample….
Quadrupole ion trap MS coupled to an Agilent HPLC with infusion pump for Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
A high-vacuum gas sorption analyzer equipped with both physisorption and chemisorption capabilities for characterization of porous materials. Electrospray Ionisation – Mass spectrometry…
Linear quadrupole ion trap MS coupled to a Dionex HPLC with infusion pump for Brunauer–Emmett–Teller (BET), Micropore Analysis, Mesopore Analysis…
Liquid Chromatography Mass Spectrometry (LC-MS). For protein sequencing, protein analysis and polymer analysis….
It can perform high vacuum physisorption analyses of surface area and micropores. For Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
This equipment measures the weight change and the rate of weight changes as a function of temperature, time and atmosphere….
This equipment measures fluorescence emission spectra for liquid/solid samples….
The device is a high-performance liquid chromatography (HPLC) systems designed for analytical and preparative chromatography applications….
The device offers flexibility for solvent selection and automation in HPLC method development….
This device is a high-performance detector designed for use in liquid chromatography (LC) applications. It features a wide range of wavelength coverage, high sensitivity, and fast response time, making it ideal for the detection of a wide variety of compounds….
The most sensitive GC/MS on the market, Shimadzu’s GCMS-QP2010 Plus delivers better performance and reliability with unsurpassed hardware capabilities and powerful, flexible software. Utilizing many of the high-end features of the GCMS-QP2010 Plus, the GCMS-QP2010S offers high throughput and excellent productivity, providing users with an excellent performance-to-cost ratio. …
The Agilent 6890N is a state-of-the-art gas chromatograph that provides superior performance for all applications. Key to its performance is the use of advanced electronic pneumatic control (EPC) modules and high performance temperature control. Each EPC unit is optimized for its intended use with a specific inlet and detector option….
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
GloMax® Discover is a microplate reader with luminescence, fluorescence, BRET/FRET and UV-Visible absorbance detection capabilities….
The TripleTOF 5600+ System combines the best-in-class front end of SCIEX Triple Quad technology with the Accelerator TOF Analyzer, to deliver nominal mass and accurate mass benefits in a single platform. This proven workhorse uniquely integrates comprehensive, qualitative exploration, rapid profiling, and high-resolution quantitation workflows, providing high performance and versatility for pharmaceutical development, omics research and any challenging unknown compound analysis….
The TripleTOF 6600+ System offers sensitive and robust quantitation using dedicated low flow source technology. Redesigned TOF entrance optics, along with software improvements within the forthcoming Analyst® TF Software 1.8, deliver optimized ion beam control, detector tuning, and scheduled ionization….
The QTRAP 6500+ system provides exceptional LOQs over a broad scope of chemical compounds in challenging matrices. QTRAP functionality turned on from the get-go. Instantly access qualitative QTRAP scans for identification, characterization and quantification of your samples. Combine sensitive MRM analysis with qualitative insights instantly.…
The Waters Synapt G2-Si ESI MS is a high resolution electrospray mass spectrometer that is also capable of performing LCMS. Using Water’s Stepwave technology to reduce background noise and eliminate neutrals, a higher signal to noise ratio is reached than traditional Q-TOF instruments. The Synapt will also be capable of performing MS/MS experiments in order to elucidate molecular structures of small molecules….
Beckman Coulter ProteomeLab XL-I analytical ultracentrifuge is equipped with absorbance (wavelength range 190 – 800 nm) and interference optics and can be used for both sedimentation velocity and sedimentation equilibrium experiments. Analytical ultracentrifugation is applicable for proteins, nucleic acids, lipids, polysaccharides, viruses and nanoparticles. It has a broad applicability including determination of sample homogeneity, oligomeric state of proteins (or molecular weight, respectively) and can be used to assess aggregation of sample and to study biomolecular interactions of self- and hetero-association systems (determination of stoichiometry and affinity)….
The Bruker AFM is able to operate in 2 modes, ICON AFM Scanner and Fast Scan ADM scanner. The fast scan mode provides X-Y tip velocity of >2 mm per sec, hence is able to scan a sample within a short span of 15 mins. There are also various modes to use, such as the nanomechanical mapping, nanomanipulation, surface potential etc….
The FEI Verios 460 is one of the leading extreme high resolution SEM family. It provides sub-nanometer resolution from 1~30 keV and enhanced contract needed for precise measurements on materials in advanced semiconductor manufacturing and advanced materials science applications. Our system is equipped with various detectors (in-column detector, ICD for high resolution imaging, STEM detector for scanning transmission electron microscopy of thin membrane etc). It also possesses electron back scattered diffraction, EBSD for crystal orientation mapping….
The Alpha 300R offers unique ability to acquire chemical information non-destructively. It allows you to observe and analyse the distribution of different phases within a sample in ambient conditions without the need to specially prepare your samples. In addition to chemical compounds, analysis of physical properties such as crystallinity or materials stress are also possible….
For department/faculty use only.
This manual digestor is ideally suited for determining the nitrogen and protein amount in solid and pasty substances. …
For department/faculty use only.
The manual distillation system of the brand Gerhardt type Vapodest 20 is ideal for nitrogen analysis and protein analysis according to the Kjeldahl method….
For department/faculty use only.
Fully automated system that could extract up to 24 different samples in less than 2 hours…
For department/faculty use only.
The FatExtractor E-500 is designed for quick and compliant fat extraction….
For department/faculty use only.
Acid hydrolysis system for treatment of samples before fat extraction…
For department/faculty use only.
This device is equipped with 1260 Infinity II PRIME LC system with column heater, autosampler, multicolumn thermostat, 1260 Infinity II Refractive index detector and 1260 Infinity ELSD…
For department/faculty use only.
HPLC system with UV and fluorescence detector…
For department/faculty use only.
The Waters HPLC System integrates solvent and sample management with consistent system-to-system performance and high reproducibility. The Waters chromatography system ensures the reliability of results through high injection precision for precise quantification and exceptional retention time repeatability for accurate peak identification. The Waters 2996 Photodiode Array (PDA) Detector operates in any standard laboratory environment. The detector requires electrical power, sample and waste fluidic lines. Optional connections on the detector rear panel allow communication with chart recorders and data integrators.
…
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
For department/faculty use only.
Capable to determine the unknown compounds based on their molecular mass…
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
For department/faculty use only.
Fully automated digestor. It can be used on food, feed, wastewater and a wide range of industrial compund….
For department/faculty use only.
Fully automated distillation, colorimetric titration and calculation….
For department/faculty use only.
This device helps to identify the potential molecular weight of big molecules….
For department/faculty use only.
This device is suitable for natural product isolation and purification with large injection volumes and big-size columns….
For department/faculty use only.
This device is used for targeted compound analysis, characterization and quantification (if standards are provided)…
For department/faculty use only.
For ashing of most type of organic and inorganic samples…
For department/faculty use only.
A rheometer is a precision instrument that contains the material of interest in a geometric configuration, controls the environment around it, and applies and measures wide ranges of stress, strain, and strain rate….
The system uses Dynamic Light Scattering (DLS) for particle sizing and distribution. For zeta potential two modes, Doppler velocimetry (electrophoretic light scattering or ELS) and Phase Analysis Light Scattering (PALS) are available. Suitable for measuring colloids, nanoparticles, proteins and peptides….
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
For department/faculty use only.
Capable of determining the molecular mass of unknown and quantifying the amount of hydrocarbons present in the sample. Able to determine by liquid, SPME, Arrow and headspace injection…
For department/faculty use only.
This device is able to concentrate samples for small-volume samples, and is suitable for temperature-sensitive samples (< 10°C)....
For department/faculty use only.
A bench-top measurement instrument designed to evaluate the color and appearance of opaque, transparent, and translucent samples….
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
For department/faculty use only.
Monochromator spectrophotometer for reading of absorbance…
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings offers modes for absorbance, kinetic analysis, and fluorescence, as well as microscopy options for high-contrast brightfield, brightfield, phase contrast, and widefield fluorescence….
For department/faculty use only.
Easy to use, powerful, compact and robust – Spectrum Two™ is the Fourier Transform Infrared (FTIR) spectrometer of choice for everyone, everywhere. With fully integrated, robust universal sampling for trouble-free measurements and portability options, Spectrum Two is ideal for use in both laboratory and remote testing environments….
For department/faculty use only.
GC-Flame ionisation detector for analysis of volatile compounds….
For department/faculty use only.
Three-Stage Programmable Furnaces feature PID control with ten programs (programs 1 to 9 are general three-stage programs; program 0 is a continuous hold at a set temperature). Program link feature lets you run two three-stage programs sequentially. Use the seven-day delay to program the completion date and time. Ramp rate is adjustable.
…
For department/faculty use only.
The SCIEX Triple Quad™ 3500 LCMS/MS system combines modern hardware, powerful software, and robust engineering to enable lower levels of detection and quantitation than conventional GC and LC workflows, and across a wider range of analytes….
For department/faculty use only.
This is a Triple Quad LCMS system that delivers reliable quantitative and qualitative results for all but the most demanding analyses. …
For department/faculty use only.
This is a Single Quad GC-MS equipped with an Agilent 7890A gas chromatograph and an Agilent 5975C mass spectrometer. …
For department/faculty use only.
The Shimadzu Prominence High-Performance Liquid Chromatograph offers exceptional reliability and great expandability to support diverse applications from UPLC to preparative LC, gel permeation chromatography (GPC), ion chromatography (IC), and LC/MS….
For department/faculty use only.
The Zetasizer Ultra is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. …
For department/faculty use only.
The CytoFLEX Flow Cytometer provides the performance of an easy-to-use system, allowing you to focus on the science, not the instrumentation. Its superior sensitivity and resolution throughout all configurations give it the edge over other cytometry systems four times its size….
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
For department/faculty use only.
ICPE-9820 is suitable for the detection and quantification of multiple elements and metal simultaneously down to ppm or ppb levels in a broad range of sample fields, such as environmental testing, pharmaceuticals, foods, chemicals, and metals….
For department/faculty use only.
The VSA measure gravimetrical change of sample subjected to varying conditions of humidity and temperature. The VSA generates both Dynamic Dew Point Isotherm (DDI) and Dynamic Vapor Sorption (DVS) characteristic curves….
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
For department/faculty use only.
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time. DSC can be used to study material’s melting, glass transition melting, crystallization, chemical reactions, polymorphic transitions, vaporization and many other processes. Specific heat capacities and changes in heat capacity, can also be determined from the difference in heat flow….
For department/faculty use only.
Brabender TwinLab with 20 mm screws together with cooling die and gravimatric feeder, is suitable for high moisture extrusion. The system also provides comprehensive diagrams with recorded measurement parameters, i.e temperature, pressure, weight for easy monitoring and design of process parameters….
For department/faculty use only.
The Acquity UPLC H-class UPLC system combines the speed and performance of UPLC with the ability to run HPLC separations. The system is configured with a PDA detector. …
For department/faculty use only.
Measure particle size based on Mie Scattering and Fraunhofer diffraction; for both liquid and solid samples
…
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
For department/faculty use only.
Circular Dichroism (CD) is an absorption spectroscopy method based on the differential absorption of left and right circularly polarized light…
For department/faculty use only.
The Agilent 6130 Single Quadrupole LCMS System is a high-performance liquid chromatography-mass spectrometry instrument that combines the separation capabilities of liquid chromatography with the detection capabilities of mass spectrometry. It uses a single quadrupole mass filter to perform accurate and sensitive mass analysis, making it ideal for a wide range of applications including protein and peptide analysis, metabolomics, and small molecule analysis….
For department/faculty use only.
The Xevo® G2-XS QTof is a high-resolution LCMS that combines StepWaveTM ion optics with the XS Collision Cell, providing a significant increase in sensitivity with no reduction in selectivity. During long analyses, critical hardware components stay clean for longer, so results are more reproducible and the laboratory stays productive….
For department/faculty use only.
Shimadzu’s GCMS-QP2020 is a high-end single quadrupole gas chromatograph mass spectrometer that offers excellent performance and smart operability, and the instrument satisfies a wide range of needs for single quadrupole GCMS systems. …
For department/faculty use only.
High shear fluid processor, high efficiency cell rupturing and high performance micro-mixing of emulsions and dispersions…
For department/faculty use only.
Studying adhesion, absorption, wetting behavior, bonding quality, surface treatments and coatings…
For department/faculty use only.
A Raman Microscope with 3 integrated lasers for chemical imaging purposes. …
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system equipped with a DAD detector for chromatographic analysis. …
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system with UHPLC compatibility. The system is equipped with a DAD detector for chromatographic analysis….
For department/faculty use only.
Prep LC with DAD…
For department/faculty use only.
An HPLC system equipped with DAD, FLD and fraction collector…
For department/faculty use only.
An HPLC system equipped with a UV detector…
For department/faculty use only.
The LCMS-8040 is a triple quad LCMS system that offers ultra-high sensitivity, speed, and reliability with improved ion optics, fast MRM transitions, and automated optimization….
For department/faculty use only.
With its array of ultrafast capabilities, the single quadrupole LCMS-2020 mass spectrometer provides the ultimate in high-speed analysis with unrivaled sensitivity. It offers faster, more accurate detection of trace impurities present in pharmaceuticals samples, environmental pollutants, or other samples. …
For department/faculty use only.
Real-time PCR detection system, combining advanced optical technology with precise temperature control to deliver sensitive, reliable detection for singleplex or multiplex reactions…
For department/faculty use only.
The CFX Connect Real-Time PCR System provides excellent thermal performance for two-target multiplex PCR and routine detection of single fluorophore experiments….
For department/faculty use only.
The GloMax® Explorer is a high-performance multimode microplate reader, which can be used as a standalone plate reading instrument or integrated into a high-throughput automated workflow….
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
For department/faculty use only.
BioTek Synergy H1 is a modular multimode microplate reader, with monochromator-based optics and filter-based optics for fluorescence and luminescence detection. …
For department/faculty use only.
This UHV Vacuum Generators ESCALAB Mk2 system has upgraded with Omicron 7-Channeltron analyser with XPS, UPS and mono-XPS in one analysis chamber and a deposition (SIMS being replaced) chamber in the other….
For department/faculty use only.
Our current setup is suitable for examining crystal-like substrates/samples. Results will depend on how crystalline the sample is. Theta-two theta scan MSDS and RA are to be provided. XRD is for crystalline sample….
For department/faculty use only.
Centrifugal evaporator with vacuum…
For department/faculty use only.
The Ring Shear Tester RST-XS.s is an easy to operate shear cell tester for the precise determination of flow properties of fine-grained powders and bulk solids….
For department/faculty use only.
Liberty Blue is an ultra-efficient automated peptide synthesizer, delivering high-quality peptides with record low waste generation and synthesis times. …
Established in 2018, the NUSMed noncoding RNA (ncRNA) Core seeks to support NUS/NUHS investigators in interrogating intracellular/circulatory ncRNA profiles/functions in diverse experimental/clinical human and animal model specimens (including biofluids, fresh frozen cells/tissues and formalin-fixed paraffin-embedded tissues). To achieve this goal, we collaborate with industry partners and leverage on their cutting edge technologies to isolate/profile/perturb ncRNAs to study their expression/forms and functions in biospecimens….
This equipment quantifies the amount of C, H, N and S in solid samples….
The IVIS Spectrum is CMIF’s optical imaging system capable of bioluminescence and fluorescence imaging. The imager takes full advantage of optical probes with wavelength across the blue to near infrared region….
The Quantum FX is designed for longitudinal in vivo imaging. The imager features fast image acquisitions while maintaining a low dose and high quality images for parametric analysis….
This system is used for quantitative positron emission tomography (PET) imaging with high sensitivity and speed. It uses panel detectors allowing to image trace amounts of probes, which translates to 10x less radiation dose to the subject and the researcher….
This is a high resolution ultrasound imaging system using linear array technology and color doppler….
The scanner is equipped with the 4th generation of TIM (Total Imaging Matrix), which provides up to 204 coils elements with up to 128 independent radiofrequency channels for fast and accurate imaging. Its 70 cm open bore makes it suitable for the imaging of large subjects. MRI provides the highest spatial resolution and unmatched soft tissue contrast….
DSA25 is an easy-to-use, reliable instrument for measuring contact angle. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
DSA30 was specially designed to investigate the contact angle on surfaces which require very small drops for analyze. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
This device currently only accept aqueous sample. Sample digestion service is not available. The sample concentration is suggested to be diluted to ppb or ppm level and to be filtered before test if there are particles….
This device is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. The measurable range for particle size test: 0.3 nm to 10 μm….
This is a high-performance, versatile flash purification system designed for broad requirements in drug discovery and research laboratories….
This system includes both steady-state and time-resolved dual capabilities. …
Attenuated Total Reflectance (QATR 10, diamond crystal) for direct measurement of liquid, film, and powder samples….
LC–MS is an analytical chemistry technique that combines the physical separation capabilities of liquid chromatography (or HPLC) with the mass analysis capabilities of mass spectrometry (MS)…
It has measurement capability in the UV, visible and up to 3,300 nm in the near-IR region allows for characterizing samples (including solids, powders, wafers, films and liquids). It has a cuvette holder and solid sample holder….
The system is equipped with a cuvette platform, and micro-volume platform for fast measurement (seconds) of µL liquid or films….
The SOMATOM Definition Flash is a dual source, 256-slice CT, which allows for very fast acquisitions ideal for cardiac examinations. Contrast-enhanced CT angiography can be acquired using accurate bolus tracking techniques.
The system is also equipped with a fluoroscopy mode with up to 10 frames/sec for interventional CT scans….
The Cios Alpha C-arm imaging modality is a fluoroscopy system well-suited for interventional procedures and is mainly used for cardiac applications like stenting or valve repair. In addition, it can also be used as an X-ray system….
Our 7T MRI system features diverse coils, including multi-nuclei options, and comprehensive scan protocols. It supports research in oncology, cardiology, neurology, hepatology, gastroenterology, musculoskeletal studies, angiography, spectroscopy, and the development of new MRI contrast agents. Leveraging its capabilities, MRI offers exceptional soft tissue contrast and the highest spatial resolution possible….
The Quantitative Proteomics Core (QPC) at CSI Singapore, NUS, has a dedicated and experienced team supporting quantitative proteomics applications in biomedical research. We provide comprehensive end-to-end solutions for quantitative proteomics needs, from consultation to sample preparation, measurement, analysis, data storage, and data visualisation with in-house bioinformatics pipelines. Collaborators need to only focus on their experiments and pass their samples to us for processing. Contact us for discussion….
The system has multichannel capabilities to run multiple experiments simultaneously. Every individual channel is independent….
A multifunctional compact scanning system equipped with a Scanning Electrochemical Microscopy (SECM), a Scanning Vibrating System (SVET), a LEIS (Localised Electrochemical Impedance Spectroscope) and a Scanning Kelvin Probe (SKP)….
The system allows measurement of the zeta potential down to a few millivolt at the solid/liquid interface by means of streaming potential and streaming current measurement. …
The equipment is capable of measuring the mechanical properties of samples (in air as well in liquid media) under controlled environmental conditions of temperature, pH and relative humidity (RH)….
Motorized inverted brightfield and fluorescence trinocular microscope. The microscope is fully enclosed in a heated environmental chamber and could set, maintain and monitor temperature, humidity, CO2 and O2 levels as imaging conditions dictate. Colibri 2 LED lamps allow adjustment of each illumination intensity depending on the sensitivity of the sample. The narrow-band illumination reduces cross-stimulation, increasing the sensitivity of your images…
True spectral imaging with AOBS (acousto-optical programmable beam splitter) provides highest flexibility switching in microseconds prolong sample viability with low power lasers. Tandem scanner with resonance scanner allows ultrafast 420 frames/sec (at 512 x 16 scan format) that is up to 50% faster image acquisition. Highly sensitive HyD detector allows a reduction of light dosage delivered to the cells, reducing photo-toxicity, and for detection of very low signals. The 3D rendering and imaging processing tools provide superb 3D reconstruction and high-quality images for analysis and publication….
The Instron 5965 is a universal testing equipment for performing tensile, compressive, shear, flexural, peel, tear and cyclic tests….
The Keyence VK-X1000K is a non-contact 3D laser profiler designed for high-precision surface measurement and analysis. It combines confocal microscopy and laser scanning technologies to provide high-resolution imaging and precise 3D surface measurements of various samples….
The DSX1000 Digital Microscope offers high-resolution imaging, flexible observation modes, and advanced measurement capabilities. It provides precise and efficient imaging for a wide range of applications. Only white light illumination is available….
The KBF-S 115 is a constant climate chamber with a large temperature and humidity range. It is typically used for shelf-life testing….
Luminex® xMAP® technology combines advanced fluidics, optics, and digital signal processing with proprietary microsphere technology to deliver both high density and high throughput multiplexed assay capabilities at the same time….
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
The MAGPIX® system integrates fluidics, mechanical, electronic, and optical subsystems with magnetic microspheres and advanced computer analysis to perform multiplex assays. Magnetic beads coated with specific reagents capture and detect analytes from samples. The sample is aspirated and conveyed into a camera chamber, where beads are immobilized and imaged under red and green LEDs. The red LED classifies the beads by color signature, while the green LED measures reporter fluorescence to quantify captured analytes. Beads are then flushed out, readying the system for the next sample….
The FlexStation 3 reader combines Molecular Devices SpectraMax® M5e Multi-Mode Microplate Reader performance with an integrated 8- or 16-channel pipettor into one compact benchtop reader. This integrated system provides users with a multi-detection platform capable of increasing the liquid handling throughput and flexibility for biochemical- and cell-based kinetic assays….
An expert from Institute for Functional Intelligent Materials (I-FIM), Denis Baranov is the person to approach for queries involving in the area of Atomic force imaging, Scanning near field optical microscope, Fluorescent systems, and other commercial and specialized microscopy techniques…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Dun Jiangnan is the person to approach for queries involving in the area of Mass spectrometry, Chromatography, Sample concentration, Microfluidics, Spectroscopy, Spray drying, Material testing, Peptide synthesis…
An expert from Yong Loo Lin School of Medicine, Drug Discovery and Optimization Platform (DDOP), Winston Liao Wupeng is the person to approach for queries involving in the area of Drug discovery and development, Respiratory disease models, Multiplexing technology, Imaging…
An expert from Yong Loo Lin School of Medicine, Sabrina Adam is the person to approach for queries involving in the area of Multiplexing technology in quantitative proteomics and transcriptomics…
An expert from Yong Loo Lin School of Medicine, Marek Kukumberg is the person to approach for queries involving in the area of Multiplexing technology in quantitative proteomics and transcriptomics…
An expert from Faculty of Science, Food Science & Technology, Jiang Xiaohui is the person to approach for queries involving in the area of Amino acid analysis, Fat extraction, Hydrolysis, Color measurement, Microplate analysis, Spectroscopy, Freeze drying, Rheological analysis, Zeta potential measurement, Homogenization, Particle size analysis, Texture analysis, Elemental analysis, General analysis, Powder production, Viscosity measurement, Thermal analysis, Extrusion technology…
An expert from Institute for Health Innovation & Technology (iHealthtech), Archana is the person to approach for queries involving in the area of Digital microscopy, High-resolution imaging, Image capture, Real-time observation, Acrylic laser cutting, Vacuum heating, Vacuum drying, , Plasma treatment, Laser microscopy, Confocal microscopy, Digital microscopy, Parylene coating, Surface treatment, Semiconductor fabrication, Thin film deposition, Sample heating, PCB prototyping, Microfluidics patterning, Laser induced graphene, Microfabrication…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Chromatography Laboratory, Liu Qiping is the person to approach for queries involving in the area of LC, DAD, PDA, FLD, GCMS, GC, FID…
An expert from Faculty of Science, Protein and Proteomics Centre and SingMass, Lim Teck Kwang is the person to approach for queries involving in the area of Proteomics, Quantitative proteomics, Shotgun proteomics, Structural proteomics, Imaging systems, Microplate readers, SWATH, MRM, QTRAP, HDX exchange, Ion mobility, Sedimentation velocity, Sedimentation equilibrium…
An expert from Cancer Science Institute, Microscopy & Multiplex Assays Core, Dedy Sandikin is the person to approach for queries involving in the area of Widefield, Fluorescence, Confocal, 3D imaging, Live cell imaging, High content imaging, Image analysis, 3D visualizations…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), NMR Laboratory, Han Yanhui is the person to approach for queries involving in the area of NMR, ESR, EPR…
An expert from Mechanobiology Institute, Anne Beghin is the person to approach for queries involving in the area of Microscopy techniques, Advanced imaging methods, Sample preparation, Experimental planning…
An expert from College of Design and Engineering, University Electron Microscopy Centre, APT Facility, Tan Xipeng is the person to approach for queries involving in the area of Brightfield, Widefield, Fluorescence, 3D imaging, Scanning Confocal, Spinning Disk confocal, Multiphoton, Live cell imaging, Calcium imaging, F-techniques, FRAP, FCS, FCCS, Image analysis, 3D visualisation, Experimental planning…
An expert from College of Design and Engineering, University Electron Microscopy Centre, APT Facility, Jonathan Aristya Setyadji is the person to approach for queries involving in the area of Brightfield, Widefield, Fluorescence, 3D imaging, Scanning Confocal, Spinning Disk confocal, Multiphoton, Live cell imaging, Calcium imaging, F-techniques, FRAP, FCS, FCCS, Image analysis, 3D visualisation, Experimental planning…
An expert from Centre for Advanced 2D Materials (CA2DM), Ang Han Siong is the person to approach for queries involving in the area of Nano device fabrication and characterisation based on 2D materials…
An expert from Faculty of Science, Food Science & Technology, Lew Huey Lee is the person to approach for queries involving in the area of Mass spectrometry, Analytical techniques, Kjeldahl analysis, Chromatography, Sample analysis, Homogenization, Moisture analysis, Viscosity measurement…
An expert from Faculty of Science, Food Science & Technology, Lu Yuyun is the person to approach for queries involving in the area of Mass spectrometry, Sample concentration, Analytical chemistry, Natural product analysis, Chromatography…
An expert from Faculty of Science, Food Science & Technology, Oh Kai Ling is the person to approach for queries involving in the area of Kjeldahl analysis, Fat extraction, Hydrolysis, Chromatography, Ash content analysis, Spectroscopy, Freeze drying, Emulsification, Texture analysis, Elemental analysis…
An expert from Faculty of Science, Food Science & Technology, Hanny Putri Pranata is the person to approach for queries involving in the area of Zeta potential analysis, Particle size analysis, Homogenization, Viscosity measurement, Thermal analysis…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Lee Soon Fatt is the person to approach for queries involving in the area of Mass spectrometry, Chromatography, Sample concentration, Microfluidics, Spectroscopy, Spray drying, Material testing, Peptide synthesis…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Physics, Evlyn Chan is the person to approach for queries involving in the area of Particle size and charge analysis, Flow cytometry, PCR and gene analysis, Microplate reading, Centrifugation, Environmental control…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Cavan Tong is the person to approach for queries involving in the area of Hidex, Microplate reader, S7-02…
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Sukaman Bin Seymo is the person to approach for queries involving in the area of Contact angle…
An expert from Faculty of Science, Physics, Tan Jyh Harng is the person to approach for queries involving in the area of Scanning electron microscopy, Sample preparation, Atomic force microscopy, X-ray photoelectron spectroscopy…
An expert from Faculty of Science, Physics, Dicky Seah is the person to approach for queries involving in the area of XRD…
An expert from Institute for Functional Intelligent Materials (I-FIM), Sourav Mitra is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…
An expert from Cancer Science Institute, Quantitative Proteomics Core, Wai Khang Yong is the person to approach for queries involving in the area of Quantitative proteomics with label-free quantification, SILAC-based quantitative proteomics, Proteome, Interactome, Proximity ligation, Clinical samples, Global post-translational modification (PTM) analysis, Cell surface proteomics…
An expert from Institute for Health Innovation & Technology (iHealthtech), Cheuk-Yan Au is the person to approach for queries involving in the area of Humidity control, Environmental testing, Stability testing, Moisture testing, Temperature and humidity testing, Controlled environments, Product testing, Soft polymer mechanical testing, 3D printing, Prototyping…
An expert from Yong Loo Lin School of Medicine, ncRNA Core, Cheong Jit Kong is the person to approach for queries involving in the area of ncRNA profiling, miRNA profiling, Functional characterization…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Mass Spectrometry Laboratory, Yuan Cheng-Hui is the person to approach for queries involving in the area of BET, Physisorption, Surface area, Pore size, LCMS, GCMS, MALDI, ESI…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Thermal Analyses Laboratory, Tan Wei Ling is the person to approach for queries involving in the area of Thermal analysis, Microwave digestion, Elemental analysis, Ion chromatography, Fluorescence spectroscopy…
An expert from Faculty of Science, Sustainable Urban Farming (SUrF) Facility, Cheryl Wang is the person to approach for queries involving in the area of Plant phenotyping…
An expert from Faculty of Science, Protein and Proteomics Centre, Wang Xian Hui is the person to approach for queries involving in the area of Sedimentation velocity, Sedimentation equilibrium…
An expert from Comparative Medicine, Rex Manguiat is the person to approach for queries involving in the area of Fluorescence and bioluminescence imaging, MicroCT imaging, Cardiac and ultrasound imaging…
An expert from Comparative Medicine, Elaine Manigbas is the person to approach for queries involving in the area of MRI techniques, particularly in Neuroimaging, Musculoskeletal imaging, Cardiology, Angiography, Diffusion tensor imaging, Oncology, Diagnostic scans and Development of new contrast agents…
An expert from Comparative Medicine, Raymond Serrano is the person to approach for queries involving in the area of CT imaging techniques, Contrast-enhanced cardiac scans, Angiography, Bone mineral density measurements, Robotic system testing, Fluoroscopy, 3D scanning for prototyping, Irradiation needs…
An expert from Comparative Medicine, Ilonka Guenther is the person to approach for queries involving in the area of PET-CT scans, Biodistribution studies, Disease monitoring, Dosimetry studies of new PET tracer, Consultation on study design, C-Arm use for Intraoperative fluoroscopy scans and X-ray scans…
An expert from Duke-NUS Animal Facility, Shawn Je is the person to approach for queries involving in the area of Molecular and cellular mechanisms, Underlying neurological and psychiatric disorders…
An expert from Institute for Functional Intelligent Materials (I-FIM), Chen Musen is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…
An expert from Cancer Science Institute, Quantitative Proteomics Core, Dennis Kappei is the person to approach for queries involving in the area of Quantitative proteomics with label-free quantification, SILAC-based quantitative proteomics, Proteome, Interactome, Proximity ligation, Clinical samples, Global post-translational modification (PTM) analysis, Cell surface proteomics…
An expert from College of Design and Engineering, Materials Science and Engineering, Electron Microscopy Facility, Yang Fengzhen is the person to approach for queries involving in the area of Transmission electron microscopy (TEM)…
An expert from College of Design and Engineering, Materials Science and Engineering, Shen Jingjing is the person to approach for queries involving in the area of Scanning Electron Microscopy (SEM)…
An expert from College of Design and Engineering, Materials Science and Engineering, Chen Qun is the person to approach for queries involving in the area of X-Ray Diffraction (XRD)…
An expert from College of Design and Engineering, Materials Science and Engineering, Henche Kuan is the person to approach for queries involving in the area of Thermal analysis, Stylus profilometry, Spectrometry (UV-Vis), Spectrometry (FTIR), Spectrometry (Fluorescence)…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Ashley Xu is the person to approach for queries involving in the area of Helium ion microscopy, Material science, Optical spectroscopy, Nanofabrication, Electron microscopy, 2D materials, 2D material characterization…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Li Haobo is the person to approach for queries involving in the area of Materials Science, Thin film and 2D materials deposition and characterization, Photolithography…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), NMR Laboratory, James Loke Wen Liang is the person to approach for queries involving in the area of NMR…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Electron Microscopy Laboratory, Cheng Liyan is the person to approach for queries involving in the area of XPS, SEM, TEM…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), X-Ray Diffraction Laboratory, Tan Geok Kheng is the person to approach for queries involving in the area of Single crystal, X-ray diffraction, Absolute configuration, Structural determination, Structure refinement, Powder X-ray diffraction, GID measurement for thin film…
An expert from Faculty of Science, X-Ray Diffraction Laboratory, Irwan Iskandar Bin Roslan is the person to approach for queries involving in the area of Single crystal, X-ray diffraction, Absolute configuration, Structural determination, Structure refinement…
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Leng Zhi Jin is the person to approach for queries involving in the area of Powder XRD, Particle sizer, Zeta potential…
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Wong Ling Rong is the person to approach for queries involving in the area of Powder XRD…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), X-Ray Diffraction Laboratory, Heng Su Peng is the person to approach for queries involving in the area of Thermal analysis, Microwave digestion, Elemental analysis, Ion chromatography, X-ray diffraction, Particle characterization…
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Mass Spectrometry Laboratory, Wong Lai Kwai is the person to approach for queries involving in the area of BET, Physisorption, Surface area, Pore size, LCMS, GCMS, MALDI, ESI…
An expert from Life Science Institute, NUS-Cambridge Cell Phenotyping Centre, Karishma Sachaphibulkij is the person to approach for queries involving in the area of Flow cytometry assays…
An expert from Life Science Institute, Advance Imaging Lab, Syaza Hazwany is the person to approach for queries involving in the area of Histology, microscopy…
An expert from Mechanobiology Institute, Liu Jun is the person to approach for queries involving in the area of Microscopy techniques, Advanced imaging methods, Experimental planning…
An expert from Mechanobiology Institute, Melvino Sin is the person to approach for queries involving in the area of Microscopy techniques, Sample preparation, Image processing…
An expert from Mechanobiology Institute, Jasmine Chin is the person to approach for queries involving in the area of Microscopy techniques, experimental planning…
An expert from Mechanobiology Institute, Paramasivam Kathirvel is the person to approach for queries involving in the area of Fluorescence-activated cell sorting, Cellular energy metabolism studies, Phenotyping screening…
An expert from College of Design and Engineering, E6 NanoFab, Loh Fong Leong is the person to approach for queries involving in the area of General tool management…
An expert from College of Design and Engineering, E6 NanoFab, Linn Linn is the person to approach for queries involving in the area of Semiconductor device cross section analyses, Advanced coating thickness and structure uniformity determination, Small contamination feature geometry and elemental composition measurement…
An expert from College of Design and Engineering, E6 NanoFab, Musni is the person to approach for queries involving in the area of Raman microscopy…
An expert from Singapore Synchrotron Light Source, Yang Ping is the person to approach for queries involving in the area of Crystallography, Materials science…
An expert from Singapore Synchrotron Light Source, Agnieszka Banas is the person to approach for queries involving in the area of Fourier Transform Infrared spectroscopy and microscopy (FTIR), O-PTIR non-contact submicron visible probe infrared spectroscopy, Nanoscale infrared spectroscopy and imaging, Synchrotron Induced X-ray Emission (SRIXE), Proton Induced X-ray Emission (PIXE), X-ray absorption fine structure (XAFS), Statistical multivariate methods for spectral data evaluation, dimension reduction…
An expert from Singapore Synchrotron Light Source, Yu Xiaojiang is the person to approach for queries involving in the area of Surface science, Condensed matter physics…
An expert from Singapore Synchrotron Light Source, Diao Caozheng is the person to approach for queries involving in the area of Surface science, Condensed matter physics…
An expert from Solar Energy Research Institute of Singapore, PV Devices Characterisation Group, Choi Kwan Bum is the person to approach for queries involving in the area of Photovoltaic cell characterisation…
An expert from Solar Energy Research Institute of Singapore, PV Module Characterisation and Reliability, Leow Shin Woei is the person to approach for queries involving in the area of PV module fabrication, PV module characterization and testing…
An expert from NUS Environmental Research Institute, Mass Spectrometry Lab, Per Poh Geok is the person to approach for queries involving in the area of Chromatography data acquisition and analysis, Method development using chromatography techniques…
An expert from NUS Environmental Research Institute, Mass Spectrometry Lab, Siah Ke Yee is the person to approach for queries involving in the area of Chromatography data acquisition and analysis, Method development using chromatography techniques…
An expert from Life Science Institute, SynCTI, Teo Wei Zhe is the person to approach for queries involving in the area of Mass spectrometry and Liquid Handling…
An expert from College of Design and Engineering, Electron Microscopy Facility, Yao Bingqing is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Electron Microscopy Facility, Zhou Xin is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Chung Jing Yang is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…