CryoTEM Krios G4 is the latest and most advanced CryoTEM commissioned and opened in 2025. It’s equipped with cold-FEG, Panther STEM detector, EMPAD, CetaD camera and Selectris Energy filter with Falcon4i electron direct detector….
Projects
FlexiVent
The flexiVent lung function solution is the gold standard for in-vivo respiratory mechanics measurements. It goes beyond traditional resistance and compliance mechanics of pulmonary ventilation and captures details about the mechanical properties of conducting airways, terminal airways and parenchyma. The flexiVent achieves the highest sensitivity and reproducibility by precisely controlling experimental conditions….
Ultrawide FoV Atom Probe Tomography
The APT device enables near-atomic level resolution (~0.2 nm depth & ~0.4 nm lateral) and 3D compositional mapping with high chemical sensitivity (<5 appm) by field evaporation and time-of-flight mass spectrometry. ...
Transmission Electron Microscope Talos L120C
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
Transmission Electron Microscope FEI Titan Krios
This is a high-end Cryo electron microscopy with electron direct detector….
X-ray Reflectometry and Diffractometry (XDD) Beamline
XDD beam line and its experimental station are designed for a general purpose of diffractometry, fluorescence detection and absorption spectroscopy, which will serve the research and development with structural determination, characterization and process monitoring in universities, institutes and industry in Singapore and the region….
Bench-top Fluorescence-activated Cell Sorter
A cell sorter with the highest level of automation and a custom biosafety cabinet….
Ga+ Large Chamber FIB
The Versa 3D DualBeam FEG FIB-SEM combines a focused Ga ion beam with a high-resolution field-emission electron gun. Owing to a large chamber allowing up to 6″ industry wafers with full rotation, the Versa 3D provides enhanced 2D and 3D materials characterization and analysis for a wide range of material science and industry-related samples….
X-ray Photoelectron Spectroscopy
Our most advanced XPS AXIS Supra+ provides a range of applications for surface science analysis. It comes with a heat and cool accessories that allow samples mounted on the sample holder to be heated up to +800°C or cooled to <100°C within the Flexi-lock and/or Sample Analysis Chamber....
UPLC QTOF
For department/faculty use only.
This device is used for untargeted compound (metabolomics) analysis and compound characterization. …
Clinical PET-CT System
High-definition positron emission tomography (HD-PET) scanner combined with a 128 slices Computed tomography (CT) scanner for high resolution anatomical co-registration. The 78 cm bore opening allows for the scanning of large subjects with a uniform resolution of the PET images of 2 mm….
Inline Multi-Chamber Magnetron Sputter Deposition
This multichamber physical vapour deposition (PVD) sputtering platform is designed to handle silicon wafers and glass panes. The SV-540 is a state-of-the-art machine having dedicated chambers for the sputtering of metallic, dielectric and TCO/TMO layers. The processing chambers are equipped with planar magnetron sources for DC sputtering of metals, oxides and oxynitrides in the reactive mode, and with a cylindrical dual-magnetron source and planar sources for pulsed DC sputtering of dielectrics and TCOs/TMOs, with substrate heating up to 500 degree Celsius….
Microscopy Cluster
The Electron Microscopy Unit (EMU) at the Yong Loo Lin School of Medicine, NUS, is a core facility within the Microscopy Cluster that provides advanced transmission and scanning electron microscopy, along with essential sample preparation tools such as ultramicrotomes. …
Critical Point Dryer LEICA CPD300
The Leica EM CPD300 critical point dryer is an important equipment for SEM sample preparation. It dries biological specimens such as pollen, tissue, plants, insects, as well as industrial samples, like Micro Electro Mechanical Systems (MEMS) or Micro fluids and gels in a fully automated and controlled process. It preserves the surface structure of a specimen which could otherwise be damaged due to surface tension when changing from the liquid to gaseous state….
Transmission Electron Microscope Talos L120C
The Talos L120C TEM is uniquely designed for performance and productivity. It has been widely used for different applications like 2D and 3D imaging of various samples including biological and material samples. The 4K × 4K Thermo Scientific Ceta CMOS Camera with large field of view enables live digital zooming with high sensitivity and high speed over the entire high-tension range. Talos comes with Thermo Scientific application software packages like EPU, EPU-D, E-Tomo, and Maps which allows automated data collection for different use cases and workflows, such as single particle screening, Micro-ED, tomography and large area 2D imaging….
Sputter coating device LEICA ACE200
The Leica EM ACE200 is a fully automated, high quality desktop coater designed to produce homogenous coatings of conductive metal or carbon required for SEM imaging. It can be used as a sputter coater or carbon thread evaporation coater with interchangeable heads in one instrument. Glow discharge function is also available for the preparation of TEM grids….
Ultramicrotome LEICA UCT/UC7
The Leica ultramicrotomes produce high-quality ultra- or semi-thin sections for TEM or LM imaging, as well as perfectly smooth surfaces required for LM, TEM, SEM, and AFM examination. They are equipped with a camera system and a monitor for effective training and demo. The touchscreen control unit of the Leica UC7 ultramicrotome has the ability to control all necessary components for sectioning including independently brightness-controlled LED light sources. It is also equipped with the FC7 low-temperature sectioning system….
SBF-SEM JEOL JSM IT710 with EDX and ConnectomX Katana microtome
The JSM-IT710 HR SEM is a high resolution SEM with the simple SEM function and Zeromag mode, that provides the versatility to handle a wide variety of samples and workflow designed for fast results. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. The SEM is also equipped with Oxford AZtecLiveLite EDS software and Xplore 65 detector for elemental analysis. The SEM has capabilities to perform automatic acquisition for volume EM with the Array Tomography software or Serial Block Face software, with the ConnectomX Katana microtome attached. …
Atomic Force Microscope (In Glovebox)
A versatile AFM that can capture images of air-sensitive materials that are inherently distortion-free and reproducible. Equipped with easy tip exchange combined with SmartScan software’s one-click imaging and pre-programmed advanced modes. …
Wire Bonder
Benchtop semi-auto wire bonder …
Luminex 200
High throughput quantitative proteomics or transcriptomic by multiplexing…
Photo and Electroluminescence Imaging System
This photoluminescence imaging tool can perform luminescence study of silicon solar cells and wafers. It gives visual information about the defects on the sample….
High Precision Large Area Solar Cell I-V Tester
LED I-V tester performs I-V measurement to determine the power conversion efficinecy of solar cell. It uses LED light enigne as light source, with illumination area of 16 cm x 16 cm. It is ideal for performing measurement of 5 busbar M2 sized solar cell….
General Purpose Solar Cell I-V Tester
Xenon-lamp based I-V tester performs I-V measurement to determine the power conversion efficiency of solar cell. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
Inline Magnetron Sputter Deposition System
This inline sputtering tool from FHR Anlagenbau, Germany has three planar magnetron sources, whereby two sources are connected to a DC power supply for DC sputtering of metal layers, while the third source is connected to an RF power supply for the deposition of dielectric films….
TT1800 Stringer For 6-BB Cell Technology
Used for the automatic soldering of metal ribbons onto solar cells and interconnecting solar cells into strings. SERIS’ customised TT1800 stringer is capable of interconnecting standard silicon solar cells with up to 6 busbars as well as interdigitated-back-contact solar cells. Both full-size cells and half-cut cells can be processed….
Long Pulse I-V Tester for PV Modules
Xenon-lamp based flash I-V tester performs I-V measurement to determine the power conversion efficiency of photovoltaic module. We provide solar cell measurement services in accordance to ISO 17025, accredited by SAC….
Outdoor PID Testing System
Custom setup to perform outdoor Potential Induced Degradation stress on PV module. System will apply up to +1500 or -1500 V to the PV modules for a specified duration….
SINS Extra Ultraviolet (EUV) Branch Beamline
Extra Ultraviolet (EUV) Branch Beamline is a second branch of the main SINS beamline. Its primary purpose is to measure the reflectivity of EUV optical components…
Soft X-ray-Ultraviolet (SUV) Beamline
The soft X-ray-ultraviolet (SUV) beamline is a state-of-the-art beamline producing photons with selective polarizations. It covers the photon energy range from soft X-ray to ultraviolet, which can be used for various advanced optical, spectroscopy and scattering measurements. This integrated characterization-and-growth facility aims to study and distinguish the interplay between spin, charge, orbital and lattice degrees of freedom of advanced materials from solid state physics to biological systems, with various forms, e.g. nanoparticle, ultrathin film to bulk….
Controlled Environment Seawater Aquarium Facility (BSL1)
Research/Study on marine life in a controlled environment aquarium…
Controlled Environment Seawater Aquarium Facility (BSL2)
Research/Study on marine life in a controlled environment aquarium…
Controlled Environment Seawater Aquarium Facility (ABSL2)
Research/Study on marine life in a controlled environment aquarium…
Saltwater Flume System
The seawater flume is a recirculating system that mimics rapids to help achieve a laminar flow of up to 0.5m/s (with honeycomb collimators). The seawater has an option of passing through a water filter to remove different contaminates, depending on its micron rating. The flume is also equipped with a flow meter (MiniWater6) and water height sensors (installation required). The toughened glass side walls allow for visualization and data capture….
Thermal Evaporator
The SCT Thermal Evaporator is a lab-scale tool for depositing metal and other functional thin films (Al, Ag, etc) onto various substrates (silicon wafers, glass sheets, etc). The deposition chamber uses a cryogenic pump and can achieve very low pressure (< 10-6 Torr), ensuring high-purity metal films. The evaporator features dual resistively heated sources and a rotating substrate table to ensure uniform depositions across large-area substrates....
Scanning Electron Microscope
General purpose SEM that performs imaging of surface morphology of conductive samples, using electrons as the beam. Useful for studying surfaces with sub-micrometer structures….
Infrared Spectro/Microscopy (ISMI) Beamline
ISMI (Infrared Spectro/Microscopy) beamline provides a state-of-the-art Fourier Transform IR spectrometer and microscope to supply diffraction-limited spatial resolution to an ever-widening range of infrared spectroscopy experiments. Synchrotron based source provides a versatile infrared radiation that covers a spectral range from 10000 to 10 cm-1 and has considerable brightness advantages over conventional (thermal) IR sources enabling IR experiments with high resolution and studies of extremely small or diluted samples….
Surface, Interface and Nanostructure Science (SINS) Beamline
SINS facility uses a bending magnetic beamline to deliver photon with an energy range from 50-1200 eV for end-station to cover the K-edges of light elements (C, N, and O) and L-edges of transition metals, and M-edges of part of rare earth metals, with user selectable linear and circular polarization for soft x-ray photon. There are two measurement chambers (main chamber and XMCD chamber) in the end-station, which are designed for X-ray photoelectron spectroscopy (XPS), angle-resolved photoemission (ARPES), X-ray absorption spectroscopy (XAS), X-ray linear dichroism (XMLD) and X-ray magnetic circular dichroism (XMCD) experiments….
Attune NeXT Flow Cytometer
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 4 lasers and 14 fluorescence detectors….
Flow Cytometer Analyser Complete with Accessories (Penteon)
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and 30 fluorescence detectors….
Confocal Laser Scanning Unit
This equipment is used for deep tissue observation, 3D image reconstruction and live cell imaging….
Agilent Seahorse XFe 96 Extracellular
This analyzer measures and reports the oxygen consumption rate (OCR), proton efflux rate (PER) or extracellular acidification rate (ECAR), as well as ATP production rates of live cells in a 96-well format. It features excellent OCR precision at low rates, verified instrument performance, optimized temperature control, and is automation enabled….
Confocal Microscope – LSM710
The LSM710 is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels). It is optimized for imaging of cells, tissues, and small organisms….
Series Laser Micro Machining System
This high end femto laser is used for precision cutting/drilling and ablating of materials by microns….
Mass Spectrometer for Liquid Chromatography System
The 6550 iFunnel Q-TOF LC/MS system offers both high sensitivity and high-resolution mass detection. It is ideally suited for proteomics research and untargeted analyte detection….
Echo 525 Liquid Handler
The Echo 525 Liquid Handler is a rapid acoustic liquid handler designed specifically for biochemical and genomics reagent transfer….
Becton Dickinson LSR Fortessa Flow Cytometer
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 4 lasers and 15 fluorescence detectors….
Flow Cytometer Analyser X-20 Complete w Accessories
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and 18 fluorescence detectors….
BD FACSAria Fusion Flow Cytometry System 5 Lasers
This flow cytometer cell sorter is used to measure fluorescently tagged individual cells or particles, followed by isolating these cells or particles based on the measurements….
Flow Cytometer Analyzer Aurora
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and spectral fluorescence flow cytometer analyser….
LSR Analyser Cambridge
This flow cytometry analyser is used to measure fluorescently tagged individual cells or particles with 5 lasers and 32 fluorescence detectors….
CIGS R&D Lab Scale Scribing Equipment
For department/faculty use only.
The hybrid scribing system is used for P1, P2 and P3 pattering and preparing of thin film and tandem mini-modules of sizes up to 30 cm × 30 cm. The machine features both laser and mechanical scribing methods to prepare thin film mini-modules and mimics the scribing processes commonly used in CIGS PV module production….
Versatile R&D Laser System
The ILS LT is an R&D laser processing workstation for high-precision applications in PV. This tool can be used for several process applications for making high-efficiency solar cells, including contact opening, selective mask processing or edge/junction isolation, wafer drilling, wafer cutting, silicon shadow mask fabrication and laser marking for substrate ID tracking purposes….
UV Preconditioning Chamber and Accessories
A chamber to perform UV light soaking as an accelerated degradation test for PV modules….
Thermal Laser Separation Wafer Dicing Machine
This advanced tool uses thermally induced mechanical stress to separate brittle semiconductor materials like silicon wafers. As opposed to conventional laser cutting, no bulging and no formation of particles occur, because the substrate is merely heated and not vaporised. The mechanical stability of TLS-processed solar cells is significantly greater than conventionally processed solar cells….
Agilent 6540 LC QToF
LC-QTOF is a versatile analytical technique that enables the identification and characterization of unknown compounds in complex samples. It is not limited to a specific research area and finds applications in various scientific disciplines….
Agilent LC-QQQ 6495C
LC-QQQ is an analytical technique commonly used for targeted quantitative analysis in various fields. It is particularly useful in areas such as environmental monitoring, food safety testing, and clinical research….
VSM (Vibrating Sample Magnetometer)
The VSM is used for measuring magnetic properties such as DC characterisation….
Confocal Microscope – FV3000NIR
The FV3000NIR is a high-speed motorised confocal laser scanning microscope with NIR imaging capability. Equipped with both galvanometer and resonant scanners, it is suitable for imaging of live and fixed samples in multiple dimensions (xyzt in multiple channels)…
SAFe360 STORM
The SAFe 360 STORM is a highly motorised laser scanning microscope for multiple 3D SMLM modalities: PALM, dSTORM , PAINT, and single particle tracking….
Confocal Microscope – Nikon A1r
The A1r inverted is a highly motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels) of fixed samples….
Slide Scanner
A slide scanner for automated imaging of large numbers of slides for fluorescence, brightfield and polarization….
Confocal Microscope – FV3000
The FV3000 is a high-speed motorised confocal laser scanning microscope. Equipped with both galvanometer and resonant scanners, it is suitable for imaging live and fixed samples in multiple dimensions (xyzt in multiple channels)….
Seahorse XF Pro Analyzer
A live cell, real-time analysis of cellular energy metabolism platform….
Molecular Beam Epitaxy (MBE) System
The fully integrated MBE system allows deposition of hetero-structures and semiconductors. IV and II-VI group deposition chambers are integrated with transfer chamber and load lock. The system has 5 ports for each chamber….
Bruker Icon Atomic Force Microscope
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
SQUID (Superconducting QUantum Interference Device) Magnetometer
This equipment uses SQUID-based magnetometry / susceptibility to provide a stable magnetic field for material characterisation….
Scanning MOKE (Magneto-Optical Kerr Microscope & Magnetometer)
This equipment is used for visualisation of magnetic domains and magnetization processes as well as for optically recording magnetization curves qualitatively on all kinds of magnetic materials, including bulk specimens like sheets or ribbons, magnetic films and multilayers, patterned films or micro- and nanowires….
Reactive Ion Etching
A plasma reactor for the dry etching of silicon and silicon oxide using photoresist masks….
ICP-RIE Plasma Etcher SI 500
The high end plasma etching system SI 500 uses an inductively coupled plasma with low ion energy for low damage etching and nano structuring….
Maskless Laser Writer
This device is used for laser UV lithography, direct writing for optical mask production and direct wafer patterning….
Mask Aligner with DUV Option
A mask aligner for UV lithography….
X1-STORM Microscope
The X1-STORM is a multi-modal system that boasts super-resolution fluorescence microscopy and live-cell spinning-disk confocal microscopy by combining N-STORM capabilities and CSU-X1 hardware on one microscope body, united by MetaMorph software….
iLAS2 TIRF Microscope
The iLAS2 TIRF is a total internal reflection fluorescence microscope for imaging close to the coverslip surface in multiple dimensions (xyt in multiple channels)….
Chemo-Mechanical Polishing (CMP)
The CMP system is used for metal and dielectric planarization such as Cu Al, SiO2, SiN. It is able to accommodate polishing for coupon size up to 2 cm as well as wafer size up to 8 inches, with a finishing surface roughness of 1 nm….
Tescan FIBSEM System
The FIBSEM system is used to capture the microstructure image of materials….
Hitachi Regulus FESEM
The FESEM system is used to capture the microstructure image of materials….
Hitachi Regulus FESEM w EDX
The FESEM system is used to capture the microstructure image of materials….
Raman (Micro PL and Raman)
The Raman microscope acquires detailed chemical images and highly specific Raman data from discrete points. It analyses both large volumes and traces of material….
E-beam Lithography (Raith)
This is a fast, high-resolution, automated wafer and multi-sample exposures electron beam lithography tool….
Furnace (Horizontal)
Furnace system for wet and dry oxidation in the temperature range of 200 to 1000 degree Celsius…
Park Systems AFM (Atomic Force Microscope)
AFM utilises imaging techniques for surface analysis. It allows accurate and non-destructive measurements of the topography, electrical, and magnetic properties of a sample surface with high resolution….
TEM 2010F
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
TEM 2800
The JEM-2800 is an advanced workhorse 200 kV transmission electron microscope with a Schottky-type field emission electron source. This multi-purpose S/TEM employs an user-friendly, high-stability operating system for high-resolution imaging in TEM (including diffraction modes) and STEM (imaging and EDS). Equipped with a TMP vacuum system, the JEM-2800 is particularly suited for fast screening of multiple samples….
SEM Sigma 300
The scanning electron microscope utilizes a focused beam of electrons to scan the surface of a sample. As the electron beam interacts with the specimen, it generates signals such as secondary electrons, backscattered electrons, and characteristic X-rays. These signals are detected and processed to create an image, revealing the topography, composition, and other features of the sample at high magnifications….
ICP Etch Cluster with 3 Modules / Plasma
The 3-chamber-modules advanced dry etching cluster system is used for micro- and nanomachining of various materials, with 8” wafer size, 300 mm diameter alumina discharge chamber, up to 8 mass flow controlled gas lines for each module and a minimum base pressure of 1×10-6 torr….
AJA Metal & Dielectric Sputtering System
This system uses close proximity physical vapour deposition with magnetron technology. The target-to-substrate distance is adjustable between 50-100 mm. The system accepts 3” diameter target size, various sample sizes and a maximum of 8” wafer….
Etcher for Magnetic Materials – SCIA
The SCIA Coat 200 is designed for homogeneous coating of high precision optics such as X-ray mirrors and optical filters with the technology of Dual Ion Beam Deposition (DIBD). The system is also equipped with a RF350-e ion beam source for etching process….
Laser Writer System – TLG (Heidelberg)
Heidelberg DWL 66+ laserwriter is a high resolution pattern generator for direct writing and mask making….
Magnetic Annealing System
This system applies an external magnetic field during the annealing process, which serves as an effective process to enhance the performance of magnetic devices and materials….
Mask Aligner MA8
The Mask Aligner 8 system is a precision photolithography tool used in the fabrication of microelectronic devices. It aligns a photomask with a substrate, typically a silicon wafer, and then exposes the substrate to ultraviolet (UV) light. This process transfers the mask’s pattern onto a light-sensitive photoresist layer on the substrate….
Atomic Layer Deposition System (ALD)
This system is used for the atomic layer deposition (ALD) of metal nitrides, oxides and sulphides with thermal and plasma processes….
Aberration-corrected Analytical S/TEM
The JEM-ARM200F is a 200 kV cold field-emission, probe-corrected transmission electron microscope with a STEM resolution of 0.078 nm and TEM resolution of 0.1 nm. It also has an energy-dispersive X-ray detector and dual energy loss spectrometers that can form elemental maps at atomic resolution, and a fast CMOS camera. With its probe aberration corrector and ultra-high-resolution pole piece it is particularly suited to STEM imaging and analysis….
Ar+ Ion Miller (TEM)
The Fischione 1051 TEM Mill allows for the preparation of TEM lamella samples through dual argon ion beams. Equipped with a touchscreen interface and camera, it can be operated through digital inputs as well as remotely….
Ar+ Ion Miller (TEM/SEM)
The Leica EM RES102 has two saddlefield ion sources with variable ion energies, with the capability of mounting a variety of samples for argon ion milling, including SEM and TEM samples….
Ar+ Ion Slicer
The Ion Slicer can prepare thin-film specimens without solvents or chemicals and requires no prior treatment of the specimen other than rectangular slicing (no disc grinding or dimple grinding)…
Ga+ Sample Preparation Focused Ion Beam
The FEI Helios 450S FIB is a dual beam Ga+ ion & electron microscope with high-resolution topographical imaging and patterning capabilities. The electron beam is primarily used for surface characterization, while the ion beam is used for top-down fabrication tasks such as TEM lamella preparation, cross-section failure analysis, and nanoscale surface modification. The stability of the low voltage ion beam and chamber cleaning attachments reduces contamination and amorphization vital for S/TEM analysis….
He+/Ne+ High-resolution FIB
The Orion NanoFab Helium Ion Microscope (HIM) operates using ionized Helium or Neon gases rather than electrons for imaging and milling of materials. With the significantly smaller interaction volume, alongside the smaller de Broglie wavelength, the HIM can achieve finer spatial resolution and larger depth-of-field compared to a FE-SEM. Nanomachining fabrication with sub-10 nm feature sizes is achievable through lighter He ions, while faster milling is operated through heavier Ne ions….
E-beam/Thermal Evaporator
This UHV deposition system is capable of producing good quality thin films of metals, alloys and their multilayers Able to handle 8” wafers size. Targets E-beam: Ti, Cr, Al Thermal: Au, Cu…
Raman Spectrometer
The Raman microscope offers advanced confocal imaging capabilities in 2D and 3D. The true confocal Raman microscope enables the most detailed images and analyses to be obtained with speed and confidence. With guaranteed high performance and intuitive simplicity, the LabRAM HR Evolution is the ultimate instrument for Raman spectroscopy. They are widely used for standard Raman analysis, PhotoLuminescence (PL), Tip Enhanced Raman Spectroscopy (TERS) and other hybrid methods….
XRD (Thin Film)
D8 ADVANCE provides a range of hardware and software solutions for X-ray diffraction and scattering applications, including phase identification, quantitative phase analysis, micro-structure and crystal structure analysis….
DSC (Differential Scanning Calorimetry) Instrument
The DSC instrument allows user to measure the heat flow into (or out of) a sample when it is heated or cooled, and use the data to determine its melting point, Tg, etc….
TGA (ThermoGravimetric Analysis) Instrument
The TGA instrument allows the user to measure the mass change in a sample when it is heated at a constant rate, at a constant temperature, or both….
STA (Simultaneous Thermal Analysis) Instrument
The STA instrument combines function of the TGA and the DSC. It allows user to measure at the same time both the heat flow and the mass change of a sample when it is heated….
Bruker Stylus Profilometer
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
KLA Tencor Stylus Profilometer
The stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
UV-Vis Spectrometer
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum….
UV-Vis Spectrometer with an Integrating Sphere
The UV-Vis spectrometer allows user to shine light in the UV-visible range through a sample and measure its absorbance or transmittance spectrum. The integrating sphere expands its capability allowing measurement of reflectance spectrum (diffuse or specular)….
Agilent FTIR Spectrometer, with ATR Accessory
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
PerkinElmer FTIR Spectrometer, with ATR Accessory
The FTIR spectrometer allows the user to shine infrared light at a sample and measure its absorbance or transmittance spectrum. The ATR accessory enables simpler and quicker measurement compared with the traditional methods (with some trade-off)….
Fluorescence Spectrometer
The fluorescence spectrometer allows user to shine light from UV-Vis range at a sample and collect its fluorescence spectrum….
Bruker AV400 (Auto)
Fully automated 400MHz NMR spectrometer for routine 1H and multi nuclear acquisition…
JEOL JES-X ESR
The JEOL JES-X320 ESR spectrometer in our lab allows measurements of samples using microwave in the X-band region. It is also equipped with a variable temperature controller (sample temperature range from -150°C to 200°C) and an ultraviolet irradiation apparatus (for photoexcitation of sample)….
X-ray Photospectroscopy
This equipment is able to investigate the surface chemistry of materials by measuring the elemental composition, chemical state, and electronic state of the elements within the top few nanometers of the surface….
SEM/EDX
This equipment is able to analyze the surface morphology and composition of a wide range of samples, including metals, biological specimens, and nanomaterials at the micro and nanometer scale….
TEM/EDX
Imaging of a specimen’s internal structure and composition at the atomic scale, allowing detailed visualization of cellular structures, materials, and nanostructures. can achieve resolution at the sub-nanometer scale, with less than 10 nanometers (nm)….
Bruker D8 Venture I Single Crystal X-Ray Diffractometer
Bruker D8 Venture is a Single Crystal X-ray Diffractometer equipped with dual source, four-circle kappa goniometer. It is used for single crystal structure analysis….
Bruker D8 Advance Powder X-Ray Diffractometer for Thin Film Samples
Bruker D8 Advance is a Powder X-ray Diffractometer equipped with CuKα source, Goebel Mirror, an XYZ Stage with motorized z-adjustable and LYNXEYE XE-T detector for thin film sample measurements at room temperature….
Multipurpose Atomic Force Microscope
The Park NX10 AFM features a True Non-Contact™ scan Mode that produces high resolution and accurate data by preventing destructive tip-sample interaction during a scan. Its compact and rigid ‘Step-and-Scan’ enables programmable multiple region imaging….
4″ Chemical Vapour Deposition
Split tube furnaces can be used for a wide range of applications where precise temperature control and the ability to easily insert and remove samples are important. Compact design for minimum space requirement….
2″ Chemical Vapour Deposition
Split tube furnaces can be used for a wide range of applications where precise temperature control and the ability to easily insert and remove samples are important. Compact design for minimum space requirement….
Graphene CVD
Graphene CVD is a process used to produce high-quality graphene sheets. This technique involves depositing carbon atoms onto a substrate, typically copper, at high temperatures. A carbon-containing gas, such as methane, is introduced into a reaction chamber where it decomposes on the hot substrate, allowing the carbon atoms to arrange themselves into a single layer of graphene. This method is preferred for its ability to produce large-area graphene with excellent electronic properties, making it suitable for applications in electronics, sensors, and other advanced technologies….
Heidelberg Laser Writer
Heidelberg laser writer is a high resolution pattern generator for direct writing and mask making….
Mask Aligner – T Lab
The Mask Aligner MJB4 system is a precision photolithography tool used in the fabrication of microelectronic devices. It aligns a photomask with a substrate, typically a silicon wafer, and then exposes the substrate to ultraviolet (UV) light. This process transfers the mask’s pattern onto a light-sensitive photoresist layer on the substrate….
Surface Stylus Profiler
Stylus profilometer allows user to scan the surface of a sample with a stylus (i.e. contact method) and then characterize its surface roughness, or determine the depth of a groove, etc….
Spin Coater
Fully programmable and user-friendly, the Cee® 200X features the accuracy and repeatability needed to eliminate processing variability from photoresist and thin film deposition processes….
ICP Etch System SI 500
An ICP etch system that utilizes plasma generated by inductively coupled sources to precisely etch materials on substrates through ion bombardment, ensuring high precision and control….
Plasma Etch System
This system enables the cleaning of surfaces, such as before bonding, soldering or gluing, as well as the activation of surfaces before printing, varnishing or gluing. Gases available are Ar, O2 and N2….
Bruker AVNEO500(iProbe)
500MHz NMR spectrometer with iProbe for 1H and multinuclear acquisition…
Bruker AVNEO500 (TBI)
500MHz NMR spectrometer with inverse probe for 1H and multidimensional experiment…
Bruker AVNEO400 (Solid)
400MHz solid state NMR spectrometer 4mm CPMAS probe for multi nuclear acquisition…
Simultaneous DSC-TGA with Mass Spectrometer
Simultaneous DSC-TGA – MS provides simultaneous measurement of heat flow (DSC) and weight change (TGA) from ambient to 1500°C along with evolved gas analyses via the bench top Pfieffer MS up to 300 amu….
Microwave Digestor
This device allows acid digestion of samples under high temperature 240°C and pressure up to 199 bar….
Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES)
This device quantifies the amount of elements present in the samples down to sub ppm levels….
Ion Chromatograph
This equipment enables quantitative analyses of anions such as F, Cl, Br, NO3, PO4, SO4 in aqueous samples….
Bruker D8 ADVANCE Powder XRD
The D8 ADVANCE is an adaptable diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
Bruker D8 ENDEAVOR Powder XRD
The D8 ENDEAVOR is a fast automated diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
Bruker D2 PHASER Powder XRD
The D2 PHASER is a benchtop diffractometer for X-ray powder diffraction measurements in Bragg-Brentano geometry….
Malvern Zetasizer Nano ZS
The Zetasizer Nano ZS is a high-performance two-angle particle and zeta potential analyzer for the enhanced detection of aggregates and small particles….
Renishaw Raman
The Renishaw Raman Microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
Dynamic Mechanical Analyzer – Science Blk 7
The Renishaw Raman microscope is coupled to excitation lasers (UV laser 325 nm, Visible laser 532 nm and near infrared laser 785 nm), motorised spectrophotometer lenses optimized for each laser wavelength, objective lens (100×, 50× LWD, 50× SLWD, 20× and 5×), Rayleigh filters, a spectrophotometer and a CCD detector….
Agilent 7890A/5975C GCMS
Dynamic Mechanical Analyzer (DMA) is equipped with interchangeable clamps such as single cantilever, dual cantilever, 3-point bending, dual film tension, shear and compression. Operation temperature range is from -150°C to 400°C….
Autoflex (MALDI)
Gas chromatography–mass spectrometry, GC-MS, is used to identify the molecular weight, elemental constitution, and molecular structure of the compounds present in the sample….
LCQ FLEET (ESI-MS)
Quadrupole ion trap MS coupled to an Agilent HPLC with infusion pump for Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
Autosorb-iQ (BET)
A high-vacuum gas sorption analyzer equipped with both physisorption and chemisorption capabilities for characterization of porous materials. Electrospray Ionisation – Mass spectrometry…
LTQ XL (LCMS)
Linear quadrupole ion trap MS coupled to a Dionex HPLC with infusion pump for Brunauer–Emmett–Teller (BET), Micropore Analysis, Mesopore Analysis…
JMS-S3000 (MALDI)
Liquid Chromatography Mass Spectrometry (LC-MS). For protein sequencing, protein analysis and polymer analysis….
Autosorb 6100 (BET)
It can perform high vacuum physisorption analyses of surface area and micropores. For Matrix-Assisted Laser Desorption/Ionization – Time of Flight (MALDI-TOF) method….
Differential Scanning Calorimeter
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
Differential Scanning Calorimeter with Autosampler
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time….
Thermogravimetric Analyser
This equipment measures the weight change and the rate of weight changes as a function of temperature, time and atmosphere….
Confocal Microscope – Olympus
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
Confocal Microscope – Stellaris 8 FALCON
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
Fluorolog-3 Spectrofluorometer
This equipment measures fluorescence emission spectra for liquid/solid samples….
Liquid Chromatograpy with Fluorescence Detector (LC-FLD)
The device is a high-performance liquid chromatography (HPLC) systems designed for analytical and preparative chromatography applications….
Liquid Chromatography with Diode Array Detector (LC-DAD)
The device offers flexibility for solvent selection and automation in HPLC method development….
Liquid Chromatography with Variable Wavelength Detector (LC-VWD)
This device is a high-performance detector designed for use in liquid chromatography (LC) applications. It features a wide range of wavelength coverage, high sensitivity, and fast response time, making it ideal for the detection of a wide variety of compounds….
GCMS-QP2010 Plus
The most sensitive GC/MS on the market, Shimadzu’s GCMS-QP2010 Plus delivers better performance and reliability with unsurpassed hardware capabilities and powerful, flexible software. Utilizing many of the high-end features of the GCMS-QP2010 Plus, the GCMS-QP2010S offers high throughput and excellent productivity, providing users with an excellent performance-to-cost ratio. …
Agilent 6890N GC-FID
The Agilent 6890N is a state-of-the-art gas chromatograph that provides superior performance for all applications. Key to its performance is the use of advanced electronic pneumatic control (EPC) modules and high performance temperature control. Each EPC unit is optimized for its intended use with a specific inlet and detector option….
PlantEye F600
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
PlantEye F500
Planteye creates unique 3D models, including high quality spectral information, of plants. The 3D model is stored and can be analyse in HortControl or any other 3D software….
iBright™ Imaging System
This system enables chemiluminescent western blot imaging, DNA gel imaging, fluorescent western blot imaging and protein gel imaging….
GloMax® Discover Microplate Reader
GloMax® Discover is a microplate reader with luminescence, fluorescence, BRET/FRET and UV-Visible absorbance detection capabilities….
TripleTOF System 5600
The TripleTOF 5600+ System combines the best-in-class front end of SCIEX Triple Quad technology with the Accelerator TOF Analyzer, to deliver nominal mass and accurate mass benefits in a single platform. This proven workhorse uniquely integrates comprehensive, qualitative exploration, rapid profiling, and high-resolution quantitation workflows, providing high performance and versatility for pharmaceutical development, omics research and any challenging unknown compound analysis….
TripleTOF System 6600
The TripleTOF 6600+ System offers sensitive and robust quantitation using dedicated low flow source technology. Redesigned TOF entrance optics, along with software improvements within the forthcoming Analyst® TF Software 1.8, deliver optimized ion beam control, detector tuning, and scheduled ionization….
QTRAP System
The QTRAP 6500+ system provides exceptional LOQs over a broad scope of chemical compounds in challenging matrices. QTRAP functionality turned on from the get-go. Instantly access qualitative QTRAP scans for identification, characterization and quantification of your samples. Combine sensitive MRM analysis with qualitative insights instantly.…
Synapt
The Waters Synapt G2-Si ESI MS is a high resolution electrospray mass spectrometer that is also capable of performing LCMS. Using Water’s Stepwave technology to reduce background noise and eliminate neutrals, a higher signal to noise ratio is reached than traditional Q-TOF instruments. The Synapt will also be capable of performing MS/MS experiments in order to elucidate molecular structures of small molecules….
Analytical Ultra Centrifuge
Beckman Coulter ProteomeLab XL-I analytical ultracentrifuge is equipped with absorbance (wavelength range 190 – 800 nm) and interference optics and can be used for both sedimentation velocity and sedimentation equilibrium experiments. Analytical ultracentrifugation is applicable for proteins, nucleic acids, lipids, polysaccharides, viruses and nanoparticles. It has a broad applicability including determination of sample homogeneity, oligomeric state of proteins (or molecular weight, respectively) and can be used to assess aggregation of sample and to study biomolecular interactions of self- and hetero-association systems (determination of stoichiometry and affinity)….
Confocal Microscope – Zeiss LSM900
A confocal light microscopy instrument for fluorescence and BF/DIC imaging…
Cytek Northern Lights™ Cell Sorter
The Cytek Northern Lights™ flow cytometer, with its easy-to-use workflow, is a flexible and affordable full spectrum flow cytometry solution for everyday research applications. The Northern Lights instrument incorporates Cytek’s powerful Full Spectrum Profiling™ (FSP™) technology in a one to three laser system, allowing for a wide array of new fluorochrome combinations without reconfiguring your system for each application. Whether you are doing basic assays such as cell proliferation, apoptosis analysis, or other cell health applications, or multicolor immunophenotyping panels, the Northern Lights system meets all of your flow cytometry needs….
Type A2 Biosafety Cabinet
Type A2 BSC with NSF49 enhanced and certified annually…
Near-Infrared II Imaging System
Near-infrared II in vivo imaging…
nanoScan® SPECT Imaging System
The nanoScan® SPECT system images radiotracers with absolute quantification, high sensitivity and high spatial resolution down to 0.3 mm in vivo. In addition, a wide range of patented multi-pinhole collimators is available with optimized performance for any applications: from whole-body to focused scanning; imaging of mice, multiple mice, large rats and rabbits; from low energy tracers to theranostic isotopes….
AniView100Pro Imaging System
AniView Pro series is an upgrade of the previous generation of AniView products, adopting a new appearance and more professional structural design. At the same time, the application function has also been enhanced to match more filters, and a new spectral separation function has been added to allow the separation of multiple fluorescent probes, so as to reduce the interference of fluorescent background on experimental results, making it an excellent partner for scientific research experiments….
UV Ozone Cleaner
The ZONETEM II utilizes vacuum-controlled UV irradiation to gently eliminate hydrocarbon contamination for electron microscopy imaging….
Plasma Cleaner
The Gatan Solarus II is a plasma cleaning system for removing organic surface contaminants through user-defined gas-flow plasma….
Dry Pumping Station
This station is used to store TEM holders….
Digital Automated
The Olympus DSX1000 is an upright fully digital microscope with automated xyz and focusing functions. The tilting head allows sample imaging from multiple angles and lens can be selected for a variety of field-of-views….
Inverted Motorized
The ECLIPSE Ti2 is an inverted microscope delivering 25 mm field of view with stable, drift-free platform for high-speed imaging applications….
Scanning Electron Microscope with Lithography
Zeiss EVO 10 is a 3-in-1 tool, featuring EBL, FESEM and EDX functions within the same tool. At challenging imaging conditions, the electron emitter users benefit from up to 10 times more beam brightness, resulting in an enhanced image resolution and contract. The SmartEDX, which is designed to acquire spatially resolved elemental information from the sample surfaces, obtains its highest throughput at 129 keV energy resolution at typical SEM operating conditions….
Modular Dry Room
This is an advanced battery research lab, equipped with 2 dry rooms (Relative Humidities 1% and 20%) designed for fabrication of batteries (electrodes and slurry) and a battery testing room, capable of galvanostatic charge-discharge tests up to 100 mA for coin, pouch and cylindrical cells….
BD Sciences Fortessa Flow Cytometer
For department/faculty use only.
The BD Fortessa is a cell analyser that combines powerful fluidic systems and novel optic designs, that combine to allow for maximised signal detection and enable minimal cross-overlapping. The 5 laser setup accommodates the detection of up to 18 colours simultaneously , providing the support for researchers for their multi-colour experiments….
Biomed Diagnostics BD FACSAria II Flow Cytometer
For department/faculty use only.
The BD FACSAria II Cell Sorter is a high-speed, high-precision flow cytometer designed for advanced cell sorting applications. It features state-of-the-art optics and fluidics systems, allowing for simultaneous sorting of up to four populations with high purity and yield. Our system offers customizable configurations with five lasers and multiple fluorescence detectors, supporting complex multi-color experiments….
Target Surfacing System
The Leica EM TXP is a target preparation device for milling, sawing, grinding, and polishing samples prior to examination by SEM, TEM, and LM techniques….
Ultramicrotome
The Leica Ultracut UCT ultramicrotome is an instrument commonly used to prepare TEM samples. It uses either a glass or diamond knife to cut ultra thin sections of specimens embedded in epoxy. The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width and can be stained and mounted onto TEM grids for viewing….
Bruker Fastscan Atomic Force Microscope
The Bruker AFM is able to operate in 2 modes, ICON AFM Scanner and Fast Scan ADM scanner. The fast scan mode provides X-Y tip velocity of >2 mm per sec, hence is able to scan a sample within a short span of 15 mins. There are also various modes to use, such as the nanomechanical mapping, nanomanipulation, surface potential etc….
Mask Aligner – Science
MJB4 mask aligner is equipped with a reliable, high precision alignment and high resolution printing capability in the submicron range. It offers fast and highly accurate alignment with SUSS singlefield or spitfield microscope….
Ultra High Vacuum Sputtering System
6 magnetron sputtering sources (3 DC and 3 AC) mainly for deposition of metals and dielectrics. The DC and RF generators support up to 750 W and 300 W respectively with auto-matching unit. Sample holder is able to hold small piece samples, up to full 8 inches in diameter wafer, with rotation and RF/DC biasing capabilities. A heater jacket is provided for chamber bake-out to achieve UHV pressure….
Electron Beam Lithography System
The JEOL JBX-6300FS EBL is a high throughput system, running at 25 keV, 50 keV and 100 keV acceleration voltages. It has mulit cassette loader (up to 10 samples) and is able to process piece part samples and full 4 inches diameter substrates. The minimum linewidth achievable in our cleanroom environment is 12 nm with sticking accuracy of less than +/- 20 nm at 100 keV. It comes with Genisys-Beamer software to assist in high resolution patterning by proximity effects….
Field Emission Scanning Electron Microscope
The FEI Verios 460 is one of the leading extreme high resolution SEM family. It provides sub-nanometer resolution from 1~30 keV and enhanced contract needed for precise measurements on materials in advanced semiconductor manufacturing and advanced materials science applications. Our system is equipped with various detectors (in-column detector, ICD for high resolution imaging, STEM detector for scanning transmission electron microscopy of thin membrane etc). It also possesses electron back scattered diffraction, EBSD for crystal orientation mapping….
E-Beam Evaporator (AJA)
The AJA electron beam evaporator system is equipped with 6x 15cc crucibles for depositing 6 materials within the same load-lock system….
Raman/IR Photoluminescence Imaging Microscope
The Alpha 300R offers unique ability to acquire chemical information non-destructively. It allows you to observe and analyse the distribution of different phases within a sample in ambient conditions without the need to specially prepare your samples. In addition to chemical compounds, analysis of physical properties such as crystallinity or materials stress are also possible….
Gerhardt Kjeldahl Digestor
For department/faculty use only.
This manual digestor is ideally suited for determining the nitrogen and protein amount in solid and pasty substances. …
Vapodest 20 Kjeldahl Distillation
For department/faculty use only.
The manual distillation system of the brand Gerhardt type Vapodest 20 is ideal for nitrogen analysis and protein analysis according to the Kjeldahl method….
Fat Extraction System Soxtherm
For department/faculty use only.
Fully automated system that could extract up to 24 different samples in less than 2 hours…
Fat Extraction System Buchi E500
For department/faculty use only.
The FatExtractor E-500 is designed for quick and compliant fat extraction….
HydrolEx H-506 Hydrolysis System
For department/faculty use only.
Acid hydrolysis system for treatment of samples before fat extraction…
UPLC system with ELSD and RID
For department/faculty use only.
This device is equipped with 1260 Infinity II PRIME LC system with column heater, autosampler, multicolumn thermostat, 1260 Infinity II Refractive index detector and 1260 Infinity ELSD…
HPLC with UV and Fluorescence Detector
For department/faculty use only.
HPLC system with UV and fluorescence detector…
HPLC with PDA
For department/faculty use only.
The Waters HPLC System integrates solvent and sample management with consistent system-to-system performance and high reproducibility. The Waters chromatography system ensures the reliability of results through high injection precision for precise quantification and exceptional retention time repeatability for accurate peak identification. The Waters 2996 Photodiode Array (PDA) Detector operates in any standard laboratory environment. The detector requires electrical power, sample and waste fluidic lines. Optional connections on the detector rear panel allow communication with chart recorders and data integrators.
…
Gas Cell Protochips
The Protochips Atmosphere allows the in-Operando study of materials under realistic environmental conditions. Based on a TEM holder closed-cell design, Atmosphere is a fully automated system that includes a computer controlled gas manifold and a feature-rich software interface….
Aracus Amino Acid Analyser
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
LA8080 Amino Acid Analyser
For department/faculty use only.
Determine amino acids contents using cation exchange column and post column derivitisation with uv detector…
Shimadzu LCMS with PDA
For department/faculty use only.
Capable to determine the unknown compounds based on their molecular mass…
Shimadzu GCMS-FID with AOC5000 autosampler
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
FOSS 2520 Kjeldahl Digestor
For department/faculty use only.
Fully automated digestor. It can be used on food, feed, wastewater and a wide range of industrial compund….
FOSS 8400 Kjeldahl Distillation
For department/faculty use only.
Fully automated distillation, colorimetric titration and calculation….
Measuring Microscope
The device has excellent versatility and high performance for measurements of parts and electrical components, with sub-micron precision….
TEM Heating and Biasing Holder
The Lightning in-situ TEM biasing & heating holder provides real-time information under a controllable electrical and thermal environment in the microscope….
Cryo-transfer
The Elsa cryo-transfer holder is a single-tilt liquid nitrogen holder designed for the frost-free transfer of a sample at liquid nitrogen temperature….
Vac-transfer/Cryo
The Mel Build Defend Atmos Defend holder incorporates a specially designed vacuum transfer system and a mechanical drift cancellation controller. The holder can be tilted along two axes and cooled down to -160°C….
Gel Permeation Chromatography with RID and PDA
For department/faculty use only.
This device helps to identify the potential molecular weight of big molecules….
Semi-Preparative System with PDA
For department/faculty use only.
This device is suitable for natural product isolation and purification with large injection volumes and big-size columns….
Acquity H-class TQXS
For department/faculty use only.
This device is used for targeted compound analysis, characterization and quantification (if standards are provided)…
Freeze Dryer for Non-food Grade Samples
For department/faculty use only.
For the freeze drying of non-food grade samples…
Thermolyne F6010 Muffler Furnace
For department/faculty use only.
For ashing of most type of organic and inorganic samples…
Rheometer
For department/faculty use only.
A rheometer is a precision instrument that contains the material of interest in a geometric configuration, controls the environment around it, and applies and measures wide ranges of stress, strain, and strain rate….
Particle Size and Zetapotential Analyser
The system uses Dynamic Light Scattering (DLS) for particle sizing and distribution. For zeta potential two modes, Doppler velocimetry (electrophoretic light scattering or ELS) and Phase Analysis Light Scattering (PALS) are available. Suitable for measuring colloids, nanoparticles, proteins and peptides….
Shimadzu GCMS-FID with AOC6000 Autosampler
For department/faculty use only.
Capable to determine the molecular mass of unknown and quantify the amount of hydrocarbons present in the sample. Able to determine by liquid injection, headspace and SPME fiber…
Agilent 7890B and 5977A GCMS
For department/faculty use only.
Capable of determining the molecular mass of unknown and quantifying the amount of hydrocarbons present in the sample. Able to determine by liquid, SPME, Arrow and headspace injection…
Centrivap
For department/faculty use only.
This device is able to concentrate samples for small-volume samples, and is suitable for temperature-sensitive samples (< 10°C)....
Colorimeter
For department/faculty use only.
A bench-top measurement instrument designed to evaluate the color and appearance of opaque, transparent, and translucent samples….
Multi-mode Microplate Spectrophotometer with Auto Pipette
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
Microplate Spectrophotometer (PowerWave X52)
For department/faculty use only.
Monochromator spectrophotometer for reading of absorbance…
Microplate Spectrophotometer (Epoch2)
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings that offers modes for absorbance, kinetic analysis, and fluorescence. …
Cell Imaging & Multimode Microplate Spectrophotometer
For department/faculty use only.
A monochromator spectrophotometer designed for microplate readings offers modes for absorbance, kinetic analysis, and fluorescence, as well as microscopy options for high-contrast brightfield, brightfield, phase contrast, and widefield fluorescence….
FTIR and ATR
For department/faculty use only.
Easy to use, powerful, compact and robust – Spectrum Two™ is the Fourier Transform Infrared (FTIR) spectrometer of choice for everyone, everywhere. With fully integrated, robust universal sampling for trouble-free measurements and portability options, Spectrum Two is ideal for use in both laboratory and remote testing environments….
Freeze Dryer for Food Grade Samples
For department/faculty use only.
For the freeze drying of food grade samples only…
Gas Chromatography System
For department/faculty use only.
GC-Flame ionisation detector for analysis of volatile compounds….
Ney Vulcan 3-1750 Muffler Furnace
For department/faculty use only.
Three-Stage Programmable Furnaces feature PID control with ten programs (programs 1 to 9 are general three-stage programs; program 0 is a continuous hold at a set temperature). Program link feature lets you run two three-stage programs sequentially. Use the seven-day delay to program the completion date and time. Ramp rate is adjustable.
…
SCIEX Triple Quad 3500 LCMS with Agilent 1290 HPLC
For department/faculty use only.
The SCIEX Triple Quad™ 3500 LCMS/MS system combines modern hardware, powerful software, and robust engineering to enable lower levels of detection and quantitation than conventional GC and LC workflows, and across a wider range of analytes….
SCIEX QTRAP 5500 MS with Agilent 1290 HPLC
For department/faculty use only.
This is a Triple Quad LCMS system that delivers reliable quantitative and qualitative results for all but the most demanding analyses. …
Agilent 7890A/5975C GCMS
For department/faculty use only.
This is a Single Quad GC-MS equipped with an Agilent 7890A gas chromatograph and an Agilent 5975C mass spectrometer. …
Shimadzu Prominence HPLC with DAD detector
For department/faculty use only.
The Shimadzu Prominence High-Performance Liquid Chromatograph offers exceptional reliability and great expandability to support diverse applications from UPLC to preparative LC, gel permeation chromatography (GPC), ion chromatography (IC), and LC/MS….
Malvern Zetasizer Ultra
For department/faculty use only.
The Zetasizer Ultra is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. …
Flow Cytometer
For department/faculty use only.
The CytoFLEX Flow Cytometer provides the performance of an easy-to-use system, allowing you to focus on the science, not the instrumentation. Its superior sensitivity and resolution throughout all configurations give it the edge over other cytometry systems four times its size….
Texture Analyser (XTplusC)
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
Shimadzu ICPE-9820 ICP-OES
For department/faculty use only.
ICPE-9820 is suitable for the detection and quantification of multiple elements and metal simultaneously down to ppm or ppb levels in a broad range of sample fields, such as environmental testing, pharmaceuticals, foods, chemicals, and metals….
Vapor Sorption Analyser
For department/faculty use only.
The VSA measure gravimetrical change of sample subjected to varying conditions of humidity and temperature. The VSA generates both Dynamic Dew Point Isotherm (DDI) and Dynamic Vapor Sorption (DVS) characteristic curves….
Spray Dryer
For department/faculty use only.
Mobile Minor can spray dry food grade solutions, suspensions or emulsions into powder samples. …
Brookfield DV2TLV Viscometer
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
Anton Paar Viscometer
For department/faculty use only.
For the measurement of the viscosity of liquid samples…
Differential Scanning Calorimeter (DSC)
For department/faculty use only.
DSC measures enthalpy changes in samples due to changes in their physical and chemical properties as a function of temperature or time. DSC can be used to study material’s melting, glass transition melting, crystallization, chemical reactions, polymorphic transitions, vaporization and many other processes. Specific heat capacities and changes in heat capacity, can also be determined from the difference in heat flow….
Extruder
For department/faculty use only.
Brabender TwinLab with 20 mm screws together with cooling die and gravimatric feeder, is suitable for high moisture extrusion. The system also provides comprehensive diagrams with recorded measurement parameters, i.e temperature, pressure, weight for easy monitoring and design of process parameters….
Acquity H-class UPLC
For department/faculty use only.
The Acquity UPLC H-class UPLC system combines the speed and performance of UPLC with the ability to run HPLC separations. The system is configured with a PDA detector. …
Silverson L4RT Homogeniser
For department/faculty use only.
Mixing, emulsifying, homogenizing, disintegrating and dissolving liquid samples…
APV Homogeniser
For department/faculty use only.
The APV systems APV-2000 homogenizer was designed for R&D laboratories within the food, dairy, chemical, cosmetic, biotech, and pharmaceutical industries. Its compact design is suitable for benchtop location and provides both quiet and smooth operation. …
Silverson L5M-A Homogeniser
For department/faculty use only.
Mixing, emulsifying, homogenizing, disintegrating and dissolving liquid samples…
Particle Size Analyser
For department/faculty use only.
Measure particle size based on Mie Scattering and Fraunhofer diffraction; for both liquid and solid samples
…
Texture Analyser (XT2i)
For department/faculty use only.
Texture analyser measures any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility of foods, cosmetics, pharmaceuticals, gels, adhesives and other consumer products….
Circular Dichroism (CD) Spectrophotometer
For department/faculty use only.
Circular Dichroism (CD) is an absorption spectroscopy method based on the differential absorption of left and right circularly polarized light…
Agilent Single Quad LCMS
For department/faculty use only.
The Agilent 6130 Single Quadrupole LCMS System is a high-performance liquid chromatography-mass spectrometry instrument that combines the separation capabilities of liquid chromatography with the detection capabilities of mass spectrometry. It uses a single quadrupole mass filter to perform accurate and sensitive mass analysis, making it ideal for a wide range of applications including protein and peptide analysis, metabolomics, and small molecule analysis….
Waters Qtof LCMS
For department/faculty use only.
The Xevo® G2-XS QTof is a high-resolution LCMS that combines StepWaveTM ion optics with the XS Collision Cell, providing a significant increase in sensitivity with no reduction in selectivity. During long analyses, critical hardware components stay clean for longer, so results are more reproducible and the laboratory stays productive….
Shimadzu QP2020 GCMS
For department/faculty use only.
Shimadzu’s GCMS-QP2020 is a high-end single quadrupole gas chromatograph mass spectrometer that offers excellent performance and smart operability, and the instrument satisfies a wide range of needs for single quadrupole GCMS systems. …
Microfluidizer LV1
For department/faculty use only.
High shear fluid processor, high efficiency cell rupturing and high performance micro-mixing of emulsions and dispersions…
Contact Angle Instrument
For department/faculty use only.
Studying adhesion, absorption, wetting behavior, bonding quality, surface treatments and coatings…
Horiba XploRA Raman Microscope
For department/faculty use only.
A Raman Microscope with 3 integrated lasers for chemical imaging purposes. …
Dionex HPLC (UltiMate 3000)
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system equipped with a DAD detector for chromatographic analysis. …
Dionex UHPLC (UltiMate 3000)
For department/faculty use only.
The Thermo Scientific™ UltiMate™ 3000 HPLC system is an easy-to-use chromatographic system with UHPLC compatibility. The system is equipped with a DAD detector for chromatographic analysis….
Shimadzu Prep LC
For department/faculty use only.
Prep LC with DAD…
Shimadzu Prominence HPLC with DAD, FLD detectors
For department/faculty use only.
An HPLC system equipped with DAD, FLD and fraction collector…
Shimadzu Bio-Inert LC
For department/faculty use only.
An HPLC system equipped with a UV detector…
Shimadzu Triple Quad LCMS
For department/faculty use only.
The LCMS-8040 is a triple quad LCMS system that offers ultra-high sensitivity, speed, and reliability with improved ion optics, fast MRM transitions, and automated optimization….
Shimadzu Single Quad LCMS
For department/faculty use only.
With its array of ultrafast capabilities, the single quadrupole LCMS-2020 mass spectrometer provides the ultimate in high-speed analysis with unrivaled sensitivity. It offers faster, more accurate detection of trace impurities present in pharmaceuticals samples, environmental pollutants, or other samples. …
CFX96 Real time PCR
For department/faculty use only.
Real-time PCR detection system, combining advanced optical technology with precise temperature control to deliver sensitive, reliable detection for singleplex or multiplex reactions…
CFX Connect Real time PCR
For department/faculty use only.
The CFX Connect Real-Time PCR System provides excellent thermal performance for two-target multiplex PCR and routine detection of single fluorophore experiments….
GloMax Explorer Multimode Microplate Reader
For department/faculty use only.
The GloMax® Explorer is a high-performance multimode microplate reader, which can be used as a standalone plate reading instrument or integrated into a high-throughput automated workflow….
Hidex Microplate Reader Science Blk 9
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
Hidex Microplate Reader Science Blk 7
For department/faculty use only.
Hidex Sense is a compact, high-performance multimode microplate reader featuring all common assay technologies. It is the ideal solution for multi-user environments when uncompromised performance, usability and sensitivity are required. Hidex Sense microplate reader includes by default temperature control up to 65°C, microplate shaking, versatile functionality for kinetic assays and several other features. The reader supports microplate formats from 1 to 1536-wells, or user defined custom formats if needed….
BioTek Synergy H1 Microplate Reader
For department/faculty use only.
BioTek Synergy H1 is a modular multimode microplate reader, with monochromator-based optics and filter-based optics for fluorescence and luminescence detection. …
ESCA System
For department/faculty use only.
This UHV Vacuum Generators ESCALAB Mk2 system has upgraded with Omicron 7-Channeltron analyser with XPS, UPS and mono-XPS in one analysis chamber and a deposition (SIMS being replaced) chamber in the other….
X-Ray Diffractometer
For department/faculty use only.
Our current setup is suitable for examining crystal-like substrates/samples. Results will depend on how crystalline the sample is. Theta-two theta scan MSDS and RA are to be provided. XRD is for crystalline sample….
Avanti JXN-26 High Speed Centrifuge
For department/faculty use only.
Experience simplified high-throughput sample processing and more control with the JXN-26 centrifuge with powerful high-speed features, low heat output, imbalance tolerance and quiet performance. …
Beckman Optima XPN 100 Ultracentrifuge
For department/faculty use only.
Beckman Coulter’s Optima™ XPN ultracentrifuge is a premiere ultracentrifuge that offers networking capability and security customization, and tracking features to ensure chain of compliance. …
ICH 110 Memmert Climate Chamber
For department/faculty use only.
ICH 110 Memmert stability climate chambers guarantee the perfect atmosphere for climate and temperature tests. …
Genevac Centrifugal Vacuum Evaporator
For department/faculty use only.
Centrifugal evaporator with vacuum…
JSM 6700F FESEM
The JSM-6700F is a field emission scanning electron microscope (FESEM) incorporating a cold cathode field emission gun, ultra-high vacuum, and sophisticated digital technologies for high-resolution, high-quality imaging of microstructures. …
Auto Coater (FESEM)
For department/faculty use only.
Coating of non-conductive sample with platinum…
Bruker Dimension Icon AFM
For department/faculty use only.
Icon XYZ Closed-Loop SPM Scan Head with nominal range of 90 µm x 90 µ and vertical range of 10 µm…
Mini Spray Dryer
For department/faculty use only.
Spray granulation, microencapsulation, micronizing, and aggregation. Efficient powder recovery with spray dryer….
Shear Cell Tester
For department/faculty use only.
The Ring Shear Tester RST-XS.s is an easy to operate shear cell tester for the precise determination of flow properties of fine-grained powders and bulk solids….
Turbo-Vap Concentration Work Station
For department/faculty use only.
TurboVap LV evaporation system is an automated high-speed, low-volume sample concentrator. It is an efficient alternative to the inconvenient set-up, constant monitoring and long evaporation times that are characteristic of conventional techniques. …
Peptide Synthesizer
For department/faculty use only.
Liberty Blue is an ultra-efficient automated peptide synthesizer, delivering high-quality peptides with record low waste generation and synthesis times. …
J-26S XP High Speed Centrifuge
For department/faculty use only.
The Beckman Avanti® J-26S XP High Performance Centrifuge is a fast and specialized high-speed centrifuge system exclusively designed to process up to six litres in less than 10 minutes. …
Research Vessel Galaxea
Research/Study on marine life…
Transmission Electron Microscope FEI Tecnai G2
The Tecnai G2 Spirit BioTWIN is fitted with the BioTWIN lens configurations, specifically designed to maximize contrast in images of inherently low-contrast and is well suited for exploring the 2D and 3D structures. The microscope is equipped with the FEI Eagle 4K digital camera. The bottom-mounted camera has a very large dynamic range, a high resolution and is optimized for high sensitivity….
Plasma Asher
MPR-6 Plasma Asher used for the removal of photoresist or other non-metallic material on the substrates like silicon wafers using plasma created by exciting ions in a gas, usually oxygen and CF4….
Magnetron Sputter Coater
Technol Magnetron Sputter coater works on physical vapor deposition (PVD) method of thin film deposition by the phenomenon of sputtering at high speed at low pressure. This involves ejecting material from a “target” that is source onto a “substrate” to form thin film/coatings on the substrate….
Double Plate | Manual Hot Press
RYJ-600D series manual hot press is suitable for heating / melting of the materials at certain temperature at a certain pressure. Applicable to polymer materials, textiles etc. It can be used as a press to test the pressure resistance of various objects and so on….
Protolaser U4
The LPKF ProtoLaser U4 is a laser-based rapid prototyping system designed to provide precise and efficient prototyping capabilities for various applications, particularly in the field of PCB (printed circuit board) prototyping. The integrated UV laser can cut individual boards out of large boards with high precision and no stress, drill holes and microvias, and create openings in solder masks. It can cut and structure LTCCs, fired ceramics, ITO/TCO substrates, delicate prepregs, and laminated materials like FR4- or RF-specific substrates….
Mask Aligner
The SUSS MJB4 Mask Aligner is a widely recognized and commonly used mask aligner system in the field of microfabrication and semiconductor manufacturing. It is designed for precise alignment and exposure of photoresist-coated substrates to patterns on a photomask, enabling the transfer of patterns onto the substrate….
Muffle Furnace 2
The muffle furnace is designed for high-temperature heating and thermal processing in a controlled environment. It has a sealed chamber that isolates the heating elements from the material being processed, minimizing contamination and ensuring uniform temperature distribution. …
Brightfield Microscope
The EVOS M7000 microscope is a fully automated, no-personal-contact imaging system. It incorporates both monochrome and color high-resolution CMOS cameras for the best of both fluorescent and colorimetric imaging. The M7000 can scan multiwell plates automatically and features speedy autofocus, image acquisition, and large data processing….
Epifluorescent Microscope
This microscope performs epifluorescence, rather than confocal fluorescence microscopy. It is great for imaging immunohistochemistry samples, and also for imaging living cells in culture over extended time periods. The software allows one to image several distinct coordinates (e.g. different wells) at set time periods (e.g. every 30 minutes) on cells in culture. The temperature, CO2 and humidity controlled chamber enables live cell experiments to be performed over extended time periods, e.g. viral plaque formation assays, scratch assays etc. It is equipped with low-light digital image capture and is fully automated….
Bioinformatics Core
This facility aims to bring together experts in the NUHS bioinformatics community to support research needs through data analysis, data management support and education….
Electrophysiology Core
The Electrophysiology Core@NUS Medicine has extensive experience in (1) characterizing disease associated ion channel mutations (2) screening of novel modulators of ion channels (3) characterizing primary or hIPSC-derived neurons or cardiomyocytes. (4) performing patch clamp recording from acutely isolated brain slice (5) recording end-plate potential in neuromuscular junction from acutely isolated phrenic nerve-diaphragm preparation (6) performing whole endolysosomal recording. The core has also collaborated with various partners such as DSO, A*STAR, NTU and SGH….
NUSMed noncoding RNA (ncRNA) Core
Established in 2018, the NUSMed noncoding RNA (ncRNA) Core seeks to support NUS/NUHS investigators in interrogating intracellular/circulatory ncRNA profiles/functions in diverse experimental/clinical human and animal model specimens (including biofluids, fresh frozen cells/tissues and formalin-fixed paraffin-embedded tissues). To achieve this goal, we collaborate with industry partners and leverage on their cutting edge technologies to isolate/profile/perturb ncRNAs to study their expression/forms and functions in biospecimens….
Confocal Microscope – Olympus FV3000
The FLUOVIEW FV3000 Series is designed to meet some of the most difficult challenges in modern science. With the high sensitivity and speed required for live cell and tissue imaging and the ease of use and flexibility required for microplate imaging and complex screening protocols, the FV3000 series supports complete workflows from live cell 2D to 6D imaging through image processing, like deconvolution, and analysis. Built for fast, stable, and accurate measurements of biological reactions within living cells or tissues, even novice users can generate high-quality data and images….
Confocal Microscope – Olympus FV1000
The FV1000 confocal laser scanning biological microscope featured the world’s first twin scan system. This system enabled time-resolved spectroscopy of living intercellular contents and also made it possible to analyze objects down to a 2 nm wavelength resolution. Image size was increased to 4096 x 4096-pixels….
Confocal Microscope – Zeiss LSM710
This system is capable of generating crosstalk-free multi-fluorescence images with simultaneous excitation of samples stained up to four colours. The TwinGate main beam splitter permits a myriad combinations of excitation wavelengths and excitation laser light suppression for improved single-to-noise ratio imaging. In addition, the multiple position feature simplifies the multidimensional imaging process. This microscope is also equipped with an environmental control chamber large enough to contain the objective lenses to minimize mechanical drift due to temperature difference during time-lapse imaging….
Slide Scanner
TissueFAXS can scan digital slides or images of tissue sections, Tissue Microarrays (TMA), cell culture monolayers, smears and of other samples on slides and oversized slides, in Microtiter plates, Petri dishes and plates in both bright-field and epifluorescence modes. It is capable of flexible imaging. TissueFAXS aims to make image acquisition more efficient with its adjustable autofocus scan strategy, autofocus interval range across samples and its instantaneous internal stitch features….
Behavorial Room 6 (Mouse)
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
CHNS Analyser
This equipment quantifies the amount of C, H, N and S in solid samples….
Scanning Electron Microscope Helios 600 DualBeam
This microscope enables surface back scatter electron imaging and ion milling….
Transmission Electron Microscope FEI Tecnai T12
This is an entry level TEM imaging at room temperature and cryo temperature….
Transmission Electron Microscope FEI Titan S/TEM
This is a high-end Material electron microscopy with electron direct detector….
Transmission Electron Microscope JEOL JEM-2200FS
This is a high-end Material electron microscopy with CMOS detector….
IVIS Optical In Vivo Imager
The IVIS Spectrum is CMIF’s optical imaging system capable of bioluminescence and fluorescence imaging. The imager takes full advantage of optical probes with wavelength across the blue to near infrared region….
MicroCT System
The Quantum FX is designed for longitudinal in vivo imaging. The imager features fast image acquisitions while maintaining a low dose and high quality images for parametric analysis….
MicroPET
This system is used for quantitative positron emission tomography (PET) imaging with high sensitivity and speed. It uses panel detectors allowing to image trace amounts of probes, which translates to 10x less radiation dose to the subject and the researcher….
High Frequency Ultrasound
This is a high resolution ultrasound imaging system using linear array technology and color doppler….
Clinical 3T MRI Scanner
The scanner is equipped with the 4th generation of TIM (Total Imaging Matrix), which provides up to 204 coils elements with up to 128 independent radiofrequency channels for fast and accurate imaging. Its 70 cm open bore makes it suitable for the imaging of large subjects. MRI provides the highest spatial resolution and unmatched soft tissue contrast….
PerkinElmer Spinning Disk Confocal
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
Yokogawa Spinning Disk Confocal
A fast confocal light microscopy instrument for fluorescence and BF/DIC imaging…
Bruker Lightsheet
A lightsheet microscopy with dipping lens for fast fluorescence imaging with super resolution…
3I Lightsheet
A lightsheet microscopy with two orthogonally arranged dipping lenses for live imaging with isotropic resolution….
TIRF 1
TIRF, FRAP and widefield fluorescent microscopy with DIC….
Cryostat
An instrument for cryosectioning of biological samples….
Workstation Kona
A high end workstation for image processing post acquisition, with licensed software: Amira, SlideBook, Imaris, Matlab….
Workstation Exalit M10
A high end workstation for image processing post acquisition, with licensed software: Amira, Cellsens, Imaris, Huygenspro….
Workstation Confo3
A high end workstation for image processing post acquisition, with licensed software: Amira, Luxbundle, Imaris, Huygenspro (with lightsheet module)….
FEI Vitrobot Mark IV
This system enables cryo sample plunge freezing….
Thorlabs Multiphoton Microscope
For department/faculty use only.
Multiphoton excitation occurs when two (or more) photons, whose summed energy is sufficient to excite a fluorophore, arrive simultaneously. The use of near infrared light to excite a fluorophore in the visible range allows multiphoton microscopy to image deeper within tissue than confocal microscopy. Additionally, since the signal is spatially confined to the focal plane of the objective, it eliminates the necessity for a confocal pinhole to generate optically sectioned images, which greatly improves detection sensitivity. The spatial confinement of signal generation also reduces overall photobleaching. These advantages make multiphoton microscopy the ideal choice for imaging deep within live tissue over long periods of time….
Drop Shape Analyzer 25E
DSA25 is an easy-to-use, reliable instrument for measuring contact angle. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
Drop Shape Analyzer 30M
DSA30 was specially designed to investigate the contact angle on surfaces which require very small drops for analyze. The methods could be by sessile drop, double sessile drop, pendent drop, etc….
Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES)
This device currently only accept aqueous sample. Sample digestion service is not available. The sample concentration is suggested to be diluted to ppb or ppm level and to be filtered before test if there are particles….
Malvern Panalytical Zetasizer
This device is an advanced system for the measurement of particle and molecular size, particle charge and particle concentration. The measurable range for particle size test: 0.3 nm to 10 μm….
Flash Chromatography
This is a high-performance, versatile flash purification system designed for broad requirements in drug discovery and research laboratories….
Fluorescence Spectrophotometer
This system includes both steady-state and time-resolved dual capabilities. …
Fourier-transform Infrared Spectroscopy (FTIR)
Attenuated Total Reflectance (QATR 10, diamond crystal) for direct measurement of liquid, film, and powder samples….
High-Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS)
LC–MS is an analytical chemistry technique that combines the physical separation capabilities of liquid chromatography (or HPLC) with the mass analysis capabilities of mass spectrometry (MS)…
Shimadzu UV-Vis-NIR Spectrophotometer
It has measurement capability in the UV, visible and up to 3,300 nm in the near-IR region allows for characterizing samples (including solids, powders, wafers, films and liquids). It has a cuvette holder and solid sample holder….
Mettler Toledo UV-Vis-NIR Spectrophotometer
The system is equipped with a cuvette platform, and micro-volume platform for fast measurement (seconds) of µL liquid or films….
Clinical CT Scanner
The SOMATOM Definition Flash is a dual source, 256-slice CT, which allows for very fast acquisitions ideal for cardiac examinations. Contrast-enhanced CT angiography can be acquired using accurate bolus tracking techniques.
The system is also equipped with a fluoroscopy mode with up to 10 frames/sec for interventional CT scans….
Gamma Irradiator
This is a fully shielded device for gamma irradiation. The system can be used in two modes: irradiation based on time or on dose….
Mobile C-Arm
The Cios Alpha C-arm imaging modality is a fluoroscopy system well-suited for interventional procedures and is mainly used for cardiac applications like stenting or valve repair. In addition, it can also be used as an X-ray system….
7T MRI Scanner
Our 7T MRI system features diverse coils, including multi-nuclei options, and comprehensive scan protocols. It supports research in oncology, cardiology, neurology, hepatology, gastroenterology, musculoskeletal studies, angiography, spectroscopy, and the development of new MRI contrast agents. Leveraging its capabilities, MRI offers exceptional soft tissue contrast and the highest spatial resolution possible….
BD FACS Melody BRYG 8-Colour Plate Sorting with BSC
For department/faculty use only.
Our BD FACS Melody is a benchtop cell sorter inside the BSC. It is capable of sorting up to eight different fluorescent markers simultaneously, making it ideal for complex multi-color experiments. The system features intuitive software, automated setup, and maintenance protocols, ensuring quick and accurate sorting with minimal user intervention….
MACSQuant VYB-Digital Benchtop Flow Cytometer
For department/faculty use only.
The MACSQuant VYB flow cytometer comes with a uniquely configured optical bench, featuring violet, yellow, and blue lasers. It is a perfect match for labs utilizing fluorescent protein reporters or for labs that want to simply use PE and FITC conjugates….
Cytek Biosciences Spectral Flow Cytometer
For department/faculty use only.
The Cytek Aurora leverages full spectrum technology, enabling the use of a wide array of new fluorochrome combinations without reconfiguring the system for each application. The Aurora system delivers high-resolution data at the single-cell level to resolve the most challenging cell populations, such as cells with high autofluorescence or low levels of expression of key biomarkers, regardless of assay complexity….
Biomed Diagnostics BD FACSAria III Flow Cytometer
For department/faculty use only.
The BD FACSAria III Cell Sorter is a high-speed, high-precision flow cytometer designed for advanced cell sorting applications. It features state-of-the-art optics and fluidics systems, allowing for simultaneous sorting of up to four populations with high purity and yield. Our system offers customizable configurations with five lasers and multiple fluorescence detectors, supporting complex multi-color experiments….
CLS143455 PhenoImager HT 1.1 One-time
The PhenoImager HT is a high-throughput imaging system designed for bright field and fluorescence scanning of tissue slides. It supports multiplexed tissue imaging, quantitative image analysis, and 3D tissue imaging. Ideal for cancer research, immunology, neuroscience, and drug development, it provides automated, high-resolution imaging for comprehensive tissue analysis, enhancing diagnostic accuracy and supporting large-scale studies….
Bloomberg Services and Non Bloomberg Services
Financial, media, software, and data company that offers financial services to organizations and companies worldwide….
FACS Aria II Cell Sorter
It is equipped with 3 air-cooled lasers and can perform up to 9 color flow cytometry analyses. It supports 2 and 4-way bulk sorting to tubes, as well as single-cell sorting to multi-well plates (ranging from 6 to 384 wells) or microscope slides.…
High Content Imaging System
The Operetta CLS system combines speed and sensitivity with the powerful and intuitive data analysis. The Operetta CLS system is part of our comprehensive HCS workflow: everything from HCS systems and microplates to automation and informatics for every application….
Quantitative Proteomics Core
The Quantitative Proteomics Core (QPC) at CSI Singapore, NUS, has a dedicated and experienced team supporting quantitative proteomics applications in biomedical research. We provide comprehensive end-to-end solutions for quantitative proteomics needs, from consultation to sample preparation, measurement, analysis, data storage, and data visualisation with in-house bioinformatics pipelines. Collaborators need to only focus on their experiments and pass their samples to us for processing. Contact us for discussion….
Confocal Microscope – Airy Scan LSM 880
LSM 880 is a motorised confocal laser scanning microscope for multidimensional acquisition (xyzt in multiple channels, tiles, FCS, FRAP) of live samples with super-resolution detection capability. Accomplished through its honeycomb 32 channel Airyscan GasPD, the system is able to increase spatial resolution 1.7x in each dimension (140 nm lateral and 400 nm axial resolution) and achieve 4x faster temporal super-resolution imaging, requiring 8x lower laser power while increasing the sensitivity. The system is especially suited for dynamic life cell imaging….
Automated Single-Slide Multispectral Microscope
The Vectra 2 System is an advanced automated imaging platform designed for multiplexed tissue analysis. It combines bright field and multispectral fluorescence imaging to capture high-resolution images of tissue sections. The system supports the simultaneous visualization and quantification of multiple biomarkers, making it ideal for research in oncology, immunology, and pathology. With automated slide scanning, robust image analysis software, and high-throughput capabilities, the Vectra 2 System enables detailed and accurate tissue analysis, enhancing the efficiency and effectiveness of complex biomedical research studies….
High Content Cell Analysis System
This confocal spinning disk microscope has the capability to automatically acquire images in multiwell plates and slides. The automated acquisition advances the imaging process and allows the researcher to study their project in an impartial way. It is suited for wide variety of samples on the Phenix, e.g. single layer cell lines, multilayer neuronal cultures, tissue sections and organoids. The Phenix is equipped with CO2 and temperature control features, enabling the capture of live cell images and time courses. A plate handler and incubator allow the automated imaging of multiple plates….
Benchtop Multiplexed Single Cell, Multi-Omics Spatial Protein – PCF (PhenoCycler & PhenoImager Fusion)
The INST1000A PhenoCycler & PhenoImager Fusion is a cutting-edge imaging system that combines bright field and fluorescence imaging capabilities for comprehensive tissue analysis. This system is an advanced automated system designed for high-plex single-cell spatial proteomics. It enables rapid, multiplexed imaging of tissue samples, allowing researchers to visualize and quantify numerous biomarkers simultaneously. The PhenoCycler offers high-resolution imaging, fast cycle times, and robust data integration capabilities, making it ideal for applications in cancer research, immunology, and neuroscience. It streamlines complex tissue analysis workflows, enhancing the accuracy and efficiency of high-throughput studies….
High-plex, Multi-omics Spatial-RNA & Protein (GeoMx Digital Spatial Profiller)
This system allows profiling of RNA and protein expression from distinct tissue compartments and cell populations with an automated and scalable workflow that integrates with standard histology staining….
BD FACS Melody Cell Sorter 3 Lasers 8 Colours
This system is capable of up to 8 colour sorting, supports 2 and 4-way bulk sorting to tubes and single-cell sorting to well plates (ranging from 6 to 384 wells). The FACSMelody features user-friendly FACSChorus software, allowing for self-operation….
FACSymphony A3
This system is equipped with 5 lasers, enables users to perform up to 28-color cell analyses.…
Potentiostat
The system has multichannel capabilities to run multiple experiments simultaneously. Every individual channel is independent….
Scanning Electrochemical Systems
A multifunctional compact scanning system equipped with a Scanning Electrochemical Microscopy (SECM), a Scanning Vibrating System (SVET), a LEIS (Localised Electrochemical Impedance Spectroscope) and a Scanning Kelvin Probe (SKP)….
Anton Paar Zetasizer
The system allows measurement of the zeta potential down to a few millivolt at the solid/liquid interface by means of streaming potential and streaming current measurement. …
Dynamic Mechanical Analyzer – Science Blk 9
The equipment is capable of measuring the mechanical properties of samples (in air as well in liquid media) under controlled environmental conditions of temperature, pH and relative humidity (RH)….
Muffle Furnace
The furnance is to perform chemical reactions, annealing of materials, devices in ambient conditions….
High Performance Fixed Alignment Cell Sorter
It is equipped with 5 air-cooled lasers and can perform up to 14 color flow cytometry analyses. It supports 2 and 4-way bulk sorting to tubes, as well as single-cell sorting to multi-well plates (ranging from 6 to 384 wells) or microscope slides.…
Live Cell Imaging Microscope
Motorized inverted brightfield and fluorescence trinocular microscope. The microscope is fully enclosed in a heated environmental chamber and could set, maintain and monitor temperature, humidity, CO2 and O2 levels as imaging conditions dictate. Colibri 2 LED lamps allow adjustment of each illumination intensity depending on the sensitivity of the sample. The narrow-band illumination reduces cross-stimulation, increasing the sensitivity of your images…
Confocal Microscope – Leica SP8
True spectral imaging with AOBS (acousto-optical programmable beam splitter) provides highest flexibility switching in microseconds prolong sample viability with low power lasers. Tandem scanner with resonance scanner allows ultrafast 420 frames/sec (at 512 x 16 scan format) that is up to 50% faster image acquisition. Highly sensitive HyD detector allows a reduction of light dosage delivered to the cells, reducing photo-toxicity, and for detection of very low signals. The 3D rendering and imaging processing tools provide superb 3D reconstruction and high-quality images for analysis and publication….
Vacuum Oven
Thermo Scientific Vacutherm Vacuum Heating and Drying Ovens provide outstanding capabilities for fast and gentle drying. Excellent heat transfer and fast heating up minimizes operation time….
Universal Testing System
The Instron 5965 is a universal testing equipment for performing tensile, compressive, shear, flexural, peel, tear and cyclic tests….
3D Printer
The QIDI Tech X-Max 3 is a large print size, industrial grade FDM 3D printer that is engineered for speed and precision…
Impulse Magnetizer
The MA-3030 Impulse magnetizer is designed to produce a short duration high-field pulse for the purpose of magnetizing geological samples. The unit is rated to deliver accurate reproducible fields less than 60 KGauss, using the axial magnetizing coil for magnetic field ranges….
O2 Plasma Bonder
The Covance-2MPR is a multi-purpose O2 plasma process system with stable and homogeneous plasma discharge. It is usually used for applications such as PDMS-PDMS bonding, PDMS-glass bonding, surface chemistry modification (eg. hydrophilic/hydrophobic), surface cleaning, plasma grafting and cell attachment….
3D Laser Profiler
The Keyence VK-X1000K is a non-contact 3D laser profiler designed for high-precision surface measurement and analysis. It combines confocal microscopy and laser scanning technologies to provide high-resolution imaging and precise 3D surface measurements of various samples….
Digital Microscope
The DSX1000 Digital Microscope offers high-resolution imaging, flexible observation modes, and advanced measurement capabilities. It provides precise and efficient imaging for a wide range of applications. Only white light illumination is available….
Parylene Coater
The Labcoter™ 3 (PDS 2010) is a Parylene Deposition System that applies a clear, uniform, and smooth Parylene coating of consistent thickness to a substrate. The coating is uniform and creates an extremely effective chemical barrier that is moisture resistant, mechanically strong, and exhibits a high dielectric constant. With Parylene deposition there is no intermediate liquid phase or separate curing cycle. The machine is typically designed to handle a variety of substrates, including metals, ceramics, plastics, and composites….
Humidity Chamber
The KBF-S 115 is a constant climate chamber with a large temperature and humidity range. It is typically used for shelf-life testing….
Universal Laser System
The VLS2.30 Desktop Laser is a compact and economical platform, designed to be an entry level laser system. It is mainly used for cutting planar acrylic….
Trotec Laser Cutter
The Trotec Speedy 360 laser cutter is a versatile and high-performance cutting and engraving machine. Its advanced laser technology offers fast and precise cutting of a wide range of materials….
Behavorial Room 2 (Rat & Mouse)
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
Behavorial Room 3 (Rat & Mouse)
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
Behavorial Room 4 (Mouse)
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
Behavorial Room 5 (Mouse)
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
Transmission Electron Microscope JEOL JEM-1400Flash
The JEM-1400Flash is equipped with a high-sensitivity sCMOS camera, “Matataki Flash”, JEOL’s innovative high-sensitivity sCMOS camera that dramatically reduces the readout noise while possessing high frame rate. This powerful feature enables high-throughput acquisition of sharp TEM images with extremely low-noise. The Limitless Panaroma (LLP) is a montage system capable of utilizing stage drive for the field shift. This new system allows for simple capture of a montage panorama image over a limitless wide area. Thus, an ultra-wide area, high pixel-resolution image is obtainable….
Scanning Electron Microscope FEI quanta 650 FEG
The Quanta 650 features a large sample chamber that enables imaging of samples of all sizes. It can be used to collect topographic information (SE mode) and observe elemental contrast (BSE mode) in the sample. Surface imaging with beam deceleration mode is possible to obtain surface and compositional information. Easy to use and intuitive controls make highly effective operation possible for novice users. The MAPS software does automatic acquisition of large overviews at any magnification, allowing high resolution imaging of large areas….
Scanning Electron Microscope JEOL JSM-6701F FEG
The JSM-6701F is suitable for observation of fine structures such as multi-layered film and nano particles fabricated by the nano technology. The high-resolution semi in-lens enables one to observe delicate specimens with minimum damage at very low accelerating voltages. At lower voltages, the fine surface structures can be observed more clearly than at higher voltages. It can be used to collect topographic information (SE and LEI mode) and observe elemental contrast (BSE mode) in the sample….
xMAP® Multiplex Assays Analyzer
Luminex® xMAP® technology combines advanced fluidics, optics, and digital signal processing with proprietary microsphere technology to deliver both high density and high throughput multiplexed assay capabilities at the same time….
Behavorial Room 1 (Rat)
The Neuroscience and Metabolic Phenotyping Core at NUS offers equipment and expertise to analyze neurobehavioral and metabolic functions in rat and mouse models of human diseases. We have a broad range of assays that investigators can select from and customize to their specific interests….
MoFlo Astrios Cell Sorter
The MoFlo Astrios is the new standard for cell sorting with functionality, speed, and improved sensitivity. It is designed for researchers who desire high productivity with more analytical capability and with biosafety solutions. The ergonomic design of Astrios makes it faster and easier to operate. All components requiring operator control are within easy reach….
BD LSRFortessa Cell Analyzer
The BD LSRFortessa™ cell analyzer offers the ultimate choice for flow cytometry, providing power, performance, and consistency. Designed to be affordable and expandable, the BD LSRFortessa has the flexibility to support the expanding needs of multicolor flow cytometry assays….
CytoFLEX Cell Analyzer
The CytoFLEX LX Flow Cytometer is an expansion of the CytoFLEX Platform. This model expands research possibilities with up to six lasers and 21 color parameters. Six spatially separated lasers allows panels to be spread across the spectrum reducing cross talk and spectral overlap….
Flow NanoFCM Cell Analyzer
Flow NanoAnalyzer can be used for the multiparameter characterization of natural and synthetic nanoparticles (7-1000 nm) at the single-particle level. Combining light scattering and fluorescence detection, high-resolution distributions of particle size and biochemical properties can be acquired simultaneously in 1-2 minutes….
Multiphoton Microscope
The SP8 DIVE (Deep In Vivo Explorer) is the first multiphoton microscope with spectrally tunable detection. This microscope provides spectral freedom, and offers unlimited flexibility and enables users to develop new multicolor deep in vivo experiments.The SP8 DIVE also provides maximum penetration depth and best contrast, and the new Vario Beam Expander can be tuned for improved penetration depth of more than 1 mm and maximum resolution….
WX100 Ultracentrifuge
An ultracentrifuge is a high-speed centrifuge used to separate particles based on density, such as proteins, nucleic acids, and cellular components, in research and industrial applications….
Applied Biosystems QuantStudio 6 Pro Real-Time PCR System
This PCR equipment amplifies specific DNA segments, enabling detailed analysis for applications in research, diagnostics, and forensics….
PET-CT Equipment (Imaging machine)
This PET-CT equipment combines Positron Emission Tomography (PET) and Computed Tomography (CT) in one scanner. It provides detailed images by detecting metabolic activity (PET) and anatomical structures (CT), helping diagnose, stage, and monitor diseases like cancer….
Glas-Col 099C A4224 Aerosol Machine
This Aerosol Infection System generates controlled airborne particles containing pathogens to study respiratory infections. It ensures precise dosing and safety for researching disease transmission, vaccine efficacy, and treatments….
Central High-Performance Computing Facility
The central HPC facility provides computing resources to support compute-intensive research and AI workloads, including the provisioning of many-cores CPU, GPU, and high-speed data storage….
Data Storage
A central service to host large-scale research data for archival purpose….
Cloud Computing
The service provides access to AWS & GCP cloud platform for researchers to use their services. NUS IT offers this service to onboard the researchers’ account under NUS subscription to enjoy private discounts on both platform (10-20% depending on the service)….
Server Colocation
The service provides rack spaces for researchers to host their servers and other rack-mounted IT equipment….
Scanning Laser Photolithography System
The laser writer tool is designed for definition of planar geometries and for surface diagnostics, in applications where maximum resolutions down to 0.7 um are required. The system transforms a laser beam into a controlled writing tool for photolithographic mask fabrication or for direct in situ processing on planar substrates. This also eliminates the requirement of mask for optical lithography….
Deep Reactive Ion Etcher
The DRIE uses special gases for standard industry semiconductor etching purpose. It is able to etch the samples in 2 modes, Bosch (chiller mode) and the Cryo (liquid nitrogen mode which could go to sub 20°C). Apart from being able to etch silicon substrates, it could be used to etch oxides and nitrides and provide good selectivity. It is also equipped with a load-lock and the processes are automated and user-friendly….
Type A2 Canopy Duct Biosafety Cabinet
Type A2 Canopy duct BSC with NSF49 enhanced and certified annually…
Type B2 Biosafety Cabinet
Type B2 BSC with NSF49 enhanced and certified annually…
Class III Biosafety Cabinet
Class III BSC with NSF49 enhanced and certified annually…
Class I Enclosure Biosafety Cabinet
Class I Enclosure with NSF49 enhanced and certified annually…
TEM 3010
The transmission electron microscope is a microscope whereby a beam of electrons is transmitted through an ultra-thin specimen, interacting with the specimen as it passes through. An image is formed from the interaction of the electrons transmitted through the specimen. The image is magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of photographic film, or to be detected by a sensor such as a CCD camera….
Luminex® Multiplex Assays Analyzer
The MAGPIX® system integrates fluidics, mechanical, electronic, and optical subsystems with magnetic microspheres and advanced computer analysis to perform multiplex assays. Magnetic beads coated with specific reagents capture and detect analytes from samples. The sample is aspirated and conveyed into a camera chamber, where beads are immobilized and imaged under red and green LEDs. The red LED classifies the beads by color signature, while the green LED measures reporter fluorescence to quantify captured analytes. Beads are then flushed out, readying the system for the next sample….
FlexStation® 3 Plate Reader
The FlexStation 3 reader combines Molecular Devices SpectraMax® M5e Multi-Mode Microplate Reader performance with an integrated 8- or 16-channel pipettor into one compact benchtop reader. This integrated system provides users with a multi-detection platform capable of increasing the liquid handling throughput and flexibility for biochemical- and cell-based kinetic assays….
THUNDER Imager 3D Tissue
THUNDER Imagers tackle biologically-relevant 3D models, providing high-speed, multicolour imaging for both thin and thick samples. They offer enhanced temporal resolution and real-time clarity of details, even deep within intact specimens, eliminating out-of-focus blur. …
Denis Baranov
An expert from Institute for Functional Intelligent Materials (I-FIM), Denis Baranov is the person to approach for queries involving in the area of Atomic force imaging, Scanning near field optical microscope, Fluorescent systems, and other commercial and specialized microscopy techniques…
Kristina Vaklinova
An expert from Institute for Functional Intelligent Materials (I-FIM), Kristina Vaklinova is the person to approach for queries involving in the area of Nanoscale heterostructures, Microscale heterostructures, Device fabrication…
Dun Jiangnan
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Dun Jiangnan is the person to approach for queries involving in the area of Mass spectrometry, Chromatography, Sample concentration, Microfluidics, Spectroscopy, Spray drying, Material testing, Peptide synthesis…
Winston Liao Wupeng
An expert from Yong Loo Lin School of Medicine, Drug Discovery and Optimization Platform (DDOP), Winston Liao Wupeng is the person to approach for queries involving in the area of Drug discovery and development, Respiratory disease models, Multiplexing technology, Imaging…
Isabelle Bonne
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Isabelle Bonne is the person to approach for queries involving in the area of Light microscopy, Confocal microscopy, Multiphoton microscopy, Electron microscopy…
Lucas Lu Thon Beng
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Lucas Lu Thon Beng is the person to approach for queries involving in the area of Sample preparation for Electron microscopy, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, Volume Electron Microscopy (vEM)…
Delia Pang
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Delia Pang is the person to approach for queries involving in the area of 3D Imaging, 3D Visualisation, Brightfield, Fluorescence, Multiphoton, Scanning confocal, Slide scanning, Widefield…
Wu Yue
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Wu Yue is the person to approach for queries involving in the area of Light microscopy, Multiphoton, High density cell culture, Micromotors…
Kay En Low
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Kay En Low is the person to approach for queries involving in the area of Sample preparation for Electron microscopy, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, and Correlative Light Electron Microscopy (CLEM)…
Samaksh Singh (Sam)
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Samaksh Singh (Sam) is the person to approach for queries involving in the area of Bioimage analysis, Segmentation, and Quantification for Electron Microscopy data…
Aik Yong Sim
An expert from Yong Loo Lin School of Medicine, Microscopy Cluster, Aik Yong Sim is the person to approach for queries involving in the area of Electron Microscopy sample preparation, Ultramicrotomy, Transmission Electron Microscopy, Scanning Electron Microscopy, and Volume Electron Microscopy (vEM)…
Sabrina Adam
An expert from Yong Loo Lin School of Medicine, Sabrina Adam is the person to approach for queries involving in the area of Multiplexing technology in quantitative proteomics and transcriptomics…
Marek Kukumberg
An expert from Yong Loo Lin School of Medicine, Marek Kukumberg is the person to approach for queries involving in the area of Multiplexing technology in quantitative proteomics and transcriptomics…
Camillo Benetti
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Camillo Benetti is the person to approach for queries involving in the area of Mass spectrometry, Chromatography, Sample concentration, Microfluidics, Spectroscopy, Spray drying, Material testing, Peptide synthesis…
Lin Yangchen
An expert from Faculty of Science, Centre for BioImaging Sciences (CBIS), Light Microscopy Core, Lin Yangchen is the person to approach for queries involving in the area of Confocal, Spinning disc with TIRF & FRAP, Lightsheet, Cryostat, Image process…
Chen Qiaojing
An expert from Cancer Science Institute of Singapore, Genomics and Data Analytics Core, Chen Qiaojing is the person to approach for queries involving in the area of Scientific project management and coordination: Bioinformatics analysis and data analysis (genomics, transcriptomics, single-cell analysis), research software development, high-performance computing, and data management…
Jiang Xiaohui
An expert from Faculty of Science, Food Science & Technology, Jiang Xiaohui is the person to approach for queries involving in the area of Amino acid analysis, Fat extraction, Hydrolysis, Color measurement, Microplate analysis, Spectroscopy, Freeze drying, Rheological analysis, Zeta potential measurement, Homogenization, Particle size analysis, Texture analysis, Elemental analysis, General analysis, Powder production, Viscosity measurement, Thermal analysis, Extrusion technology…
Archana
An expert from Institute for Health Innovation & Technology (iHealthtech), Archana is the person to approach for queries involving in the area of Digital microscopy, High-resolution imaging, Image capture, Real-time observation, Acrylic laser cutting, Vacuum heating, Vacuum drying, , Plasma treatment, Laser microscopy, Confocal microscopy, Digital microscopy, Parylene coating, Surface treatment, Semiconductor fabrication, Thin film deposition, Sample heating, PCB prototyping, Microfluidics patterning, Laser induced graphene, Microfabrication…
Liu Qiping
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Chromatography Laboratory, Liu Qiping is the person to approach for queries involving in the area of LC, DAD, PDA, FLD, GCMS, GC, FID…
Lim Teck Kwang
An expert from Faculty of Science, Protein and Proteomics Centre and SingMass, Lim Teck Kwang is the person to approach for queries involving in the area of Proteomics, Quantitative proteomics, Shotgun proteomics, Structural proteomics, Imaging systems, Microplate readers, SWATH, MRM, QTRAP, HDX exchange, Ion mobility, Sedimentation velocity, Sedimentation equilibrium…
Zeming Lim
An expert from Duke-NUS FACS Core Facility, Zeming Lim is the person to approach for queries involving in the area of Flow cytometry…
Erica Xu Songci
An expert from Cancer Science Institute, Fluorescence Activated Cell Sorting (FACS) Facility, Erica Xu Songci is the person to approach for queries involving in the area of Cell sorting, Flow cytometry panel design, Flow cyotmetry experiment design, FlowJO data analysis…
Dedy Sandikin
An expert from Cancer Science Institute, Microscopy & Multiplex Assays Core, Dedy Sandikin is the person to approach for queries involving in the area of Widefield, Fluorescence, Confocal, 3D imaging, Live cell imaging, High content imaging, Image analysis, 3D visualizations…
Han Yanhui
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), NMR Laboratory, Han Yanhui is the person to approach for queries involving in the area of NMR, ESR, EPR…
Anne Beghin
An expert from Mechanobiology Institute, Anne Beghin is the person to approach for queries involving in the area of Microscopy techniques, Advanced imaging methods, Sample preparation, Experimental planning…
Syazwanee
An expert from Tropical Marine Science Institute, Syazwanee is the person to approach for queries involving in the area of Aquarium operations…
Tan Xipeng
An expert from College of Design and Engineering, University Electron Microscopy Centre, APT Facility, Tan Xipeng is the person to approach for queries involving in the area of Brightfield, Widefield, Fluorescence, 3D imaging, Scanning Confocal, Spinning Disk confocal, Multiphoton, Live cell imaging, Calcium imaging, F-techniques, FRAP, FCS, FCCS, Image analysis, 3D visualisation, Experimental planning…
Jonathan Aristya Setyadji
An expert from College of Design and Engineering, University Electron Microscopy Centre, APT Facility, Jonathan Aristya Setyadji is the person to approach for queries involving in the area of Brightfield, Widefield, Fluorescence, 3D imaging, Scanning Confocal, Spinning Disk confocal, Multiphoton, Live cell imaging, Calcium imaging, F-techniques, FRAP, FCS, FCCS, Image analysis, 3D visualisation, Experimental planning…
Huang Chiung-Hui
An expert from Yong Loo Lin School of Medicine, Paediatrics, Huang Chiung-Hui is the person to approach for queries involving in the area of Flow cytometry assays…
Sindhu Ravindran
An expert from Yong Loo Lin School of Medicine, BSL-3 Core Facility, Sindhu Ravindran is the person to approach for queries involving in the area of Biosafety coordinator…
Wang Junhong
An expert from NUS Information Technology, Wang Junhong is the person to approach for queries involving in the area of High-performance computing, Multi-core cluster, GPU accelerators, Scientific applications…
Yeo Eng Hee
An expert from NUS Information Technology, Yeo Eng Hee is the person to approach for queries involving in the area of Cloud computing, AWS, Google cloud platform, Data storage…
Gee Chao Ping
An expert from NUS Information Technology, Gee Chao Ping is the person to approach for queries involving in the area of Colocation, Data center…
Ang Han Siong
An expert from Centre for Advanced 2D Materials (CA2DM), Ang Han Siong is the person to approach for queries involving in the area of Nano device fabrication and characterisation based on 2D materials…
Lew Huey Lee
An expert from Faculty of Science, Food Science & Technology, Lew Huey Lee is the person to approach for queries involving in the area of Mass spectrometry, Analytical techniques, Kjeldahl analysis, Chromatography, Sample analysis, Homogenization, Moisture analysis, Viscosity measurement…
Lu Yuyun
An expert from Faculty of Science, Food Science & Technology, Lu Yuyun is the person to approach for queries involving in the area of Mass spectrometry, Sample concentration, Analytical chemistry, Natural product analysis, Chromatography…
Oh Kai Ling
An expert from Faculty of Science, Food Science & Technology, Oh Kai Ling is the person to approach for queries involving in the area of Kjeldahl analysis, Fat extraction, Hydrolysis, Chromatography, Ash content analysis, Spectroscopy, Freeze drying, Emulsification, Texture analysis, Elemental analysis…
Hanny Putri Pranata
An expert from Faculty of Science, Food Science & Technology, Hanny Putri Pranata is the person to approach for queries involving in the area of Zeta potential analysis, Particle size analysis, Homogenization, Viscosity measurement, Thermal analysis…
Lee Soon Fatt
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Lee Soon Fatt is the person to approach for queries involving in the area of Mass spectrometry, Chromatography, Sample concentration, Microfluidics, Spectroscopy, Spray drying, Material testing, Peptide synthesis…
Evlyn Chan
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Physics, Evlyn Chan is the person to approach for queries involving in the area of Particle size and charge analysis, Flow cytometry, PCR and gene analysis, Microplate reading, Centrifugation, Environmental control…
Cavan Tong
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Cavan Tong is the person to approach for queries involving in the area of Hidex, Microplate reader, S7-02…
Sukaman Bin Seymo
An expert from Faculty of Science, Pharmacy and Pharmaceutical Sciences, Sukaman Bin Seymo is the person to approach for queries involving in the area of Contact angle…
Tan Jyh Harng
An expert from Faculty of Science, Physics, Tan Jyh Harng is the person to approach for queries involving in the area of Scanning electron microscopy, Sample preparation, Atomic force microscopy, X-ray photoelectron spectroscopy…
Dicky Seah
An expert from Faculty of Science, Physics, Dicky Seah is the person to approach for queries involving in the area of XRD…
Sourav Mitra
An expert from Institute for Functional Intelligent Materials (I-FIM), Sourav Mitra is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…
Wai Khang Yong
An expert from Cancer Science Institute, Quantitative Proteomics Core, Wai Khang Yong is the person to approach for queries involving in the area of Quantitative proteomics with label-free quantification, SILAC-based quantitative proteomics, Proteome, Interactome, Proximity ligation, Clinical samples, Global post-translational modification (PTM) analysis, Cell surface proteomics…
Peng Yanfen
An expert from Cancer Science Institute, Microscopy & Multiplex Assays Core, Peng Yanfen is the person to approach for queries involving in the area of Multiplex, IF satining, imaging and analysis…
Cheuk-Yan Au
An expert from Institute for Health Innovation & Technology (iHealthtech), Cheuk-Yan Au is the person to approach for queries involving in the area of Humidity control, Environmental testing, Stability testing, Moisture testing, Temperature and humidity testing, Controlled environments, Product testing, Soft polymer mechanical testing, 3D printing, Prototyping…
Juliette Ngan
An expert from Institute for Health Innovation & Technology (iHealthtech), Juliette Ngan is the person to approach for queries involving in the area of Acrylic, wood, textiles laser cutting…
Zhang Wei
An expert from Institute for Health Innovation & Technology (iHealthtech), Zhang Wei is the person to approach for queries involving in the area of Magnetisation treatment…
Cheng Shangying
An expert from Yong Loo Lin School of Medicine, Bioinformatics Core, Cheng Shangying is the person to approach for queries involving in the area of Bioinformatics, Data analysis, Data management…
Huang Hua
An expert from Yong Loo Lin School of Medicine, Electrophysiology Core, Huang Hua is the person to approach for queries involving in the area of Electrophysiology, Patch clamp, Functional characterization…
Cheong Jit Kong
An expert from Yong Loo Lin School of Medicine, ncRNA Core, Cheong Jit Kong is the person to approach for queries involving in the area of ncRNA profiling, miRNA profiling, Functional characterization…
Lee Shu Ying
An expert from Yong Loo Lin School of Medicine, Confocal Microscopy Core, Lee Shu Ying is the person to approach for queries involving in the area of Microscopy…
Wang Xiaoning
An expert from Yong Loo Lin School of Medicine, Flow Cytometry Core, Wang Xiaoning is the person to approach for queries involving in the area of Cell sorting…
Micky Leong
An expert from Yong Loo Lin School of Medicine, Electron Microsopy Unit, Micky Leong is the person to approach for queries involving in the area of Electron microscopy…
Wong Peiyan
An expert from Yong Loo Lin School of Medicine, Neuroscience & Metabolic Phenotyping Core, Wong Peiyan is the person to approach for queries involving in the area of Rodent behavorial testing, Metabolic phenotyping…
Zhao Tianzhi
An expert from Yong Loo Lin School of Medicine, Theranostics Center of Excellence, Zhao Tianzhi is the person to approach for queries involving in the area of Quantitative imaging…
Zhao Mengyao
An expert from Yong Loo Lin School of Medicine, Theranostics Center of Excellence, Zhao Mengyao is the person to approach for queries involving in the area of Quantitative imaging…
Tummala Pinaka Pani
An expert from Institute for Functional Intelligent Materials (I-FIM), Tummala Pinaka Pani is the person to approach for queries involving in the area of Large-area growth of MoS2 nanosheets, Fabrication of two-dimensional transition metal dichalcogenides (TMDs), Chemical vapor deposition (CVD), Furnace management and operation…
Yuan Cheng-Hui
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Mass Spectrometry Laboratory, Yuan Cheng-Hui is the person to approach for queries involving in the area of BET, Physisorption, Surface area, Pore size, LCMS, GCMS, MALDI, ESI…
Tan Wei Ling
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Thermal Analyses Laboratory, Tan Wei Ling is the person to approach for queries involving in the area of Thermal analysis, Microwave digestion, Elemental analysis, Ion chromatography, Fluorescence spectroscopy…
Cheryl Wang
An expert from Faculty of Science, Sustainable Urban Farming (SUrF) Facility, Cheryl Wang is the person to approach for queries involving in the area of Plant phenotyping…
Wang Xian Hui
An expert from Faculty of Science, Protein and Proteomics Centre, Wang Xian Hui is the person to approach for queries involving in the area of Sedimentation velocity, Sedimentation equilibrium…
Tong Yan
An expert from Faculty of Science, CBIS LM Core, Tong Yan is the person to approach for queries involving in the area of Confocal, Spinning disc with TIRF & FRAP, Lightsheet, Cryostat, Image process…
Shi Jian
An expert from Faculty of Science, Centre for BioImaging Sciences (CBIS), CryoEM Facility, Shi Jian is the person to approach for queries involving in the area of CryoEm sample preparation, SEM and FIB, TEM, Cryo-TEM, CryoEM, TEM-Material science, SPA, Tomography, MicroED, HR-TEM, STEM, 4D-STEM…
Rex Manguiat
An expert from Comparative Medicine, Rex Manguiat is the person to approach for queries involving in the area of Fluorescence and bioluminescence imaging, MicroCT imaging, Cardiac and ultrasound imaging…
Elaine Manigbas
An expert from Comparative Medicine, Elaine Manigbas is the person to approach for queries involving in the area of MRI techniques, particularly in Neuroimaging, Musculoskeletal imaging, Cardiology, Angiography, Diffusion tensor imaging, Oncology, Diagnostic scans and Development of new contrast agents…
Raymond Serrano
An expert from Comparative Medicine, Raymond Serrano is the person to approach for queries involving in the area of CT imaging techniques, Contrast-enhanced cardiac scans, Angiography, Bone mineral density measurements, Robotic system testing, Fluoroscopy, 3D scanning for prototyping, Irradiation needs…
Ilonka Guenther
An expert from Comparative Medicine, Ilonka Guenther is the person to approach for queries involving in the area of PET-CT scans, Biodistribution studies, Disease monitoring, Dosimetry studies of new PET tracer, Consultation on study design, C-Arm use for Intraoperative fluoroscopy scans and X-ray scans…
Shawn Je
An expert from Duke-NUS Animal Facility, Shawn Je is the person to approach for queries involving in the area of Molecular and cellular mechanisms, Underlying neurological and psychiatric disorders…
Chen Musen
An expert from Institute for Functional Intelligent Materials (I-FIM), Chen Musen is the person to approach for queries involving in the area of Surface analysis, Elemental and concentration analysis, Particle and molecular characterization, Separation and identification, Spectroscopy, Electrochemical analysis, Mechanical and thermal analysis…
Low Jun Siong
An expert from Cancer Science Institute, Fluorescence Activated Cell Sorting (FACS) Facility, Low Jun Siong is the person to approach for queries involving in the area of Cell sorting, Flow cytometry panel design, Flow cyotmetry experiment design, FlowJO data analysis…
Dennis Kappei
An expert from Cancer Science Institute, Quantitative Proteomics Core, Dennis Kappei is the person to approach for queries involving in the area of Quantitative proteomics with label-free quantification, SILAC-based quantitative proteomics, Proteome, Interactome, Proximity ligation, Clinical samples, Global post-translational modification (PTM) analysis, Cell surface proteomics…
Yang Fengzhen
An expert from College of Design and Engineering, Materials Science and Engineering, Electron Microscopy Facility, Yang Fengzhen is the person to approach for queries involving in the area of Transmission electron microscopy (TEM)…
Shen Jingjing
An expert from College of Design and Engineering, Materials Science and Engineering, Shen Jingjing is the person to approach for queries involving in the area of Scanning Electron Microscopy (SEM)…
Chen Qun
An expert from College of Design and Engineering, Materials Science and Engineering, Chen Qun is the person to approach for queries involving in the area of X-Ray Diffraction (XRD)…
Henche Kuan
An expert from College of Design and Engineering, Materials Science and Engineering, Henche Kuan is the person to approach for queries involving in the area of Thermal analysis, Stylus profilometry, Spectrometry (UV-Vis), Spectrometry (FTIR), Spectrometry (Fluorescence)…
Ashley Xu
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Ashley Xu is the person to approach for queries involving in the area of Helium ion microscopy, Material science, Optical spectroscopy, Nanofabrication, Electron microscopy, 2D materials, 2D material characterization…
Chiam Taw Chun
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Chiam Taw Chun is the person to approach for queries involving in the area of Material science, Nanofabrication, Electrical characterisation, 2D materials…
Li Haobo
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Li Haobo is the person to approach for queries involving in the area of Materials Science, Thin film and 2D materials deposition and characterization, Photolithography…
Tihomir Marjanovic
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Tihomir Marjanovic is the person to approach for queries involving in the area of Material Science, Precise instrumentation, System optimization in nanotechnology and electrical control system…
Jian Linke
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Jian Linke is the person to approach for queries involving in the area of Microfabrication, Lithography, SEM imaging, ICP dry etching, Optical mask making, Thin film deposition(eBeam & Thermal)…
James Loke Wen Liang
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), NMR Laboratory, James Loke Wen Liang is the person to approach for queries involving in the area of NMR…
Cheng Liyan
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Electron Microscopy Laboratory, Cheng Liyan is the person to approach for queries involving in the area of XPS, SEM, TEM…
Tan Geok Kheng
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), X-Ray Diffraction Laboratory, Tan Geok Kheng is the person to approach for queries involving in the area of Single crystal, X-ray diffraction, Absolute configuration, Structural determination, Structure refinement, Powder X-ray diffraction, GID measurement for thin film…
Irwan Iskandar Bin Roslan
An expert from Faculty of Science, X-Ray Diffraction Laboratory, Irwan Iskandar Bin Roslan is the person to approach for queries involving in the area of Single crystal, X-ray diffraction, Absolute configuration, Structural determination, Structure refinement…
Leng Zhi Jin
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Leng Zhi Jin is the person to approach for queries involving in the area of Powder XRD, Particle sizer, Zeta potential…
Wong Ling Rong
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Wong Ling Rong is the person to approach for queries involving in the area of Powder XRD…
Heng Su Peng
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), X-Ray Diffraction Laboratory, Heng Su Peng is the person to approach for queries involving in the area of Thermal analysis, Microwave digestion, Elemental analysis, Ion chromatography, X-ray diffraction, Particle characterization…
Mya Mya Khin
An expert from Faculty of Science, Advanced Chemistry Teaching Laboratory, Mya Mya Khin is the person to approach for queries involving in the area of Raman microscope, Material tensile, Material shear, Material compression…
Wong Lai Kwai
An expert from Faculty of Science, Chemical, Molecular and Materials Analysis Centre (CMMAC), Mass Spectrometry Laboratory, Wong Lai Kwai is the person to approach for queries involving in the area of BET, Physisorption, Surface area, Pore size, LCMS, GCMS, MALDI, ESI…
Karishma Sachaphibulkij
An expert from Life Science Institute, NUS-Cambridge Cell Phenotyping Centre, Karishma Sachaphibulkij is the person to approach for queries involving in the area of Flow cytometry assays…
Syaza Hazwany
An expert from Life Science Institute, Advance Imaging Lab, Syaza Hazwany is the person to approach for queries involving in the area of Histology, microscopy…
Liu Jun
An expert from Mechanobiology Institute, Liu Jun is the person to approach for queries involving in the area of Microscopy techniques, Advanced imaging methods, Experimental planning…
Gianluca Grenci
An expert from Mechanobiology Institute, Gianluca Grenci is the person to approach for queries involving in the area of Si micromachining, Photo-patterning…
Mohammed Ashraf
An expert from Mechanobiology Institute, Mohammed Ashraf is the person to approach for queries involving in the area of Si micromachining, Photo-patterning…
Melvino Sin
An expert from Mechanobiology Institute, Melvino Sin is the person to approach for queries involving in the area of Microscopy techniques, Sample preparation, Image processing…
Jasmine Chin
An expert from Mechanobiology Institute, Jasmine Chin is the person to approach for queries involving in the area of Microscopy techniques, experimental planning…
Paramasivam Kathirvel
An expert from Mechanobiology Institute, Paramasivam Kathirvel is the person to approach for queries involving in the area of Fluorescence-activated cell sorting, Cellular energy metabolism studies, Phenotyping screening…
Patrick Tang
An expert from College of Design and Engineering, E6 NanoFab, Patrick Tang is the person to approach for queries involving in the area of General tool management…
Loh Fong Leong
An expert from College of Design and Engineering, E6 NanoFab, Loh Fong Leong is the person to approach for queries involving in the area of General tool management…
Thomas Ang
An expert from College of Design and Engineering, E6 NanoFab, Thomas Ang is the person to approach for queries involving in the area of Microelectronic fabrication…
Htike Aung
An expert from College of Design and Engineering, E6 NanoFab, Htike Aung is the person to approach for queries involving in the area of Microelectronic fabrication…
David Xu Baochang
An expert from College of Design and Engineering, E6 NanoFab, David Xu Baochang is the person to approach for queries involving in the area of Microelectronic fabrication…
Xiao Yun
An expert from College of Design and Engineering, E6 NanoFab, Xiao Yun is the person to approach for queries involving in the area of Lithography…
Lin Zhong Guan
An expert from College of Design and Engineering, E6 NanoFab, Lin Zhong Guan is the person to approach for queries involving in the area of Microelectronic fabrication…
Chua Kut Tiong
An expert from College of Design and Engineering, E6 NanoFab, Chua Kut Tiong is the person to approach for queries involving in the area of Microelectronic fabrication…
Linn Linn
An expert from College of Design and Engineering, E6 NanoFab, Linn Linn is the person to approach for queries involving in the area of Semiconductor device cross section analyses, Advanced coating thickness and structure uniformity determination, Small contamination feature geometry and elemental composition measurement…
Musni
An expert from College of Design and Engineering, E6 NanoFab, Musni is the person to approach for queries involving in the area of Raman microscopy…
Manohar Lal
An expert from College of Design and Engineering, E6 NanoFab, Manohar Lal is the person to approach for queries involving in the area of Sub-10nm nanofabrication and nanolithography…
Yang Ping
An expert from Singapore Synchrotron Light Source, Yang Ping is the person to approach for queries involving in the area of Crystallography, Materials science…
Agnieszka Banas
An expert from Singapore Synchrotron Light Source, Agnieszka Banas is the person to approach for queries involving in the area of Fourier Transform Infrared spectroscopy and microscopy (FTIR), O-PTIR non-contact submicron visible probe infrared spectroscopy, Nanoscale infrared spectroscopy and imaging, Synchrotron Induced X-ray Emission (SRIXE), Proton Induced X-ray Emission (PIXE), X-ray absorption fine structure (XAFS), Statistical multivariate methods for spectral data evaluation, dimension reduction…
Yu Xiaojiang
An expert from Singapore Synchrotron Light Source, Yu Xiaojiang is the person to approach for queries involving in the area of Surface science, Condensed matter physics…
Diao Caozheng
An expert from Singapore Synchrotron Light Source, Diao Caozheng is the person to approach for queries involving in the area of Surface science, Condensed matter physics…
Sebestian Yeo
An expert from Tropical Marine Science Institute, Sebestian Yeo is the person to approach for queries involving in the area of Research vessel…
Jackson Chan
An expert from Tropical Marine Science Institute, Jackson Chan is the person to approach for queries involving in the area of Aquarium operations…
Lay Peng
An expert from Tropical Marine Science Institute, Lay Peng is the person to approach for queries involving in the area of BSL2 and ABSL2 operations…
Tzer Shyun
An expert from Tropical Marine Science Institute, Tzer Shyun is the person to approach for queries involving in the area of BSL2 and ABSL2 operations…
Selvaraj Venkataraj
An expert from Solar Energy Research Institute of Singapore, Selvaraj Venkataraj is the person to approach for queries involving in the area of Solar cell device fabrication and characterization, Optical coatings, Thin film deposition, Magnetron sputtering…
Choi Kwan Bum
An expert from Solar Energy Research Institute of Singapore, PV Devices Characterisation Group, Choi Kwan Bum is the person to approach for queries involving in the area of Photovoltaic cell characterisation…
Srinath Nalluri
An expert from Solar Energy Research Institute of Singapore, Building Integrated Photovoltaics, Srinath Nalluri is the person to approach for queries involving in the area of PV module fabrication, PV module testing and simulation…
Carlos Clement
An expert from Solar Energy Research Institute of Singapore, Building Integrated Photovoltaics, Carlos Clement is the person to approach for queries involving in the area of PV module fabrication, PV module characterisation, simulation and testing…
Aziz Nairi
An expert from Solar Energy Research Institute of Singapore, PV Module Characterisation and Reliability, Leow Shin Woei is the person to approach for queries involving in the area of PV module fabrication, PV module characterization and testing…
Ison Jeffrey Garcia
An expert from Solar Energy Research Institute of Singapore, Ison Jeffrey Garcia is the person to approach for queries involving in the area of Laser processing – Photovoltaic solar cells…
Per Poh Geok
An expert from NUS Environmental Research Institute, Mass Spectrometry Lab, Per Poh Geok is the person to approach for queries involving in the area of Chromatography data acquisition and analysis, Method development using chromatography techniques…
Siah Ke Yee
An expert from NUS Environmental Research Institute, Mass Spectrometry Lab, Siah Ke Yee is the person to approach for queries involving in the area of Chromatography data acquisition and analysis, Method development using chromatography techniques…
Tony Wong
An expert from Centre for Quantum Technologies, Tony Wong is the person to approach for queries involving in the area of Microstructure fabrication, Micro machining, Precision manufacturing…
Teo Wei Zhe
An expert from Life Science Institute, SynCTI, Teo Wei Zhe is the person to approach for queries involving in the area of Mass spectrometry and Liquid Handling…
Paul Hutchinson
An expert from Life Science Institute, Flow Cytometry Lab, Paul Hutchinson is the person to approach for queries involving in the area of Flow cytometry assays…
Tan Shengdong
An expert from College of Design and Engineering, Electron Microscopy Facility, Tan Shengdong is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
Yao Bingqing
An expert from College of Design and Engineering, Electron Microscopy Facility, Yao Bingqing is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
Zhou Xin
An expert from College of Design and Engineering, Electron Microscopy Facility, Zhou Xin is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…
Chung Jing Yang
An expert from College of Design and Engineering, Materials Science and Engineering, T11 Shared Facilities, Electron Microscopy Facility, Chung Jing Yang is the person to approach for queries involving in the area of SEM, TEM, STEM, FIB, EDS, EELS…